Threaded rods - Import export

Steel Pin, Threaded Stud, for door use 2 holes drilled and threaded, thread grade: 5/16-18 UNC size: hex incircle diameter 0.750 +/-0.010 inch length 4.438 +/-0.010 inch, across flats distance of hex end 0.75 inch, round end diameter 0.625 +0.000/-0.005 inch unit weight: 223 g material: cold rolled steel surface finish: rust preventive oil Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

ladder-shaped threaded rod size helical pitch: 10 mm diameter: 14 mm length: 300 mm 2 holes milled and threaded in one end, thread specification: M3 material: stainless steel 303 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Threaded rods for wedge sockets in special design with property class 8.8 for applications with high-tensile bearing means Surface black passivated ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

ETA-08/0231 * Non covered by E.T.A.

ETA-08/0231 * Non covered by E.T.A.

Threaded Rods - Length 1 Meter Brass - DIN 976

This item refers to DIN 976 but P6.6 material is not guaranteed by norms

Rod and thread : stainless steel EA = Assembling thickness

Rod = AISI 420 Thread = Stainless steel A2 EA = Assembling thickness

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

The required torque is set by a set screw and a graduated scale. The set value can be secured using the lateral clamping screw. When the set torque is reached the grip audibly and palpably releases. The loosening torque is higher than the tightening torque so that the torque handle can be released without any problems. The internal thread version has a hole in the set screw so that the torque handle can also be used on threaded rods. Set torque accuracy ± 5%. On request: Other thread lengths.

Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on both sides.

Doubleacting pneumatic cylinder in constructionoptimised design acc. to DIN ISO 15552. Piston rod with external thread, position detection and adjustable pneumatic damping. Due to their robust construction, these cylinders are the preferred choice for numerous applications.

Eyelet bolts Eyebolts with larger eye (forged) ATTENTION: The strength of the eyelet bolt must be in accordance to the strength of the wire rope. * Please indicate length of thread with your order

Eye bolts acc. to DIN 444 with property class 8.8 for applications with high-tensile bearing means surface black passivated ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Item-no.: S05 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no. Other dimensions on request!

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 =Standard lengths of the threaded rods are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 = Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Wedge sockets in special design with screw galvanized surface With type testing similar to EN 13411-6 ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. material: G20Mn5N * material: GE240 ** material: GGG50 DIN 1693 *,** The standard design of these wedge sockets is not suitable for the use in areas liable to frost. Designs with a guaranteed impact test at lower temperatures are deliverable on request. Please find certificates and instructions in our download area: