Technology - Import export

Multi-busbar technology of solar cells PERSC and half-cells configurations provide higher power output, better efficiency depending on the temperature, lower shadow effects, lower risk of hot spots, and endurance for mechanical burden.

The LT®1964 is a micropower low noise, low dropout negative regulator. The device is capable of supplying 200mA of output current with a dropout voltage of 340mV. Low quiescent current (30μA operating and 3μA shutdown) makes the LT1964 an excellent choice for battery-powered applications. Quiescent current is well controlled in dropout.

The LTC1151CN8 is a high performance, low power, chopper stabilized instrumentation amplifier. It is designed to provide superior performance in a wide variety of applications.

This means no more complex computer programmes requiring the knowledge of experienced programmers. No more equipment that is extremely sensitive to high ambient temperatures, thus resulting in the variable quality of manufactured products. No more need for large-scale production operations to ensure that this equipment is cost-effective. The new programming tools available offer a user-friendly approach to robot configuration. Using a simple touch tablet, you can quickly and easily reprogramme your robot, which can be fully and economically operated even for small and medium-sized production runs, without the need to call on a programming expert.

The drive technology online configurator gives you the right drive technology system after you enter your requirements. You also have the option of requesting or ordering motors and other accessories, such as the motor control system. - Fast and easy configuration - Optional accessories - Detailed parts list - Fast delivery

drylin® SLW-1040 linear module, drylin® W aluminium profile, surface: hard-anodised, ball bearing Trapezoidal lead screw TR10x2 made of stainless steel, lead screw end machined 6h9x17mm, guide carriage in 100mm length, shaft end support made of anodised aluminium. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® ZLW-0630 basic toothed belt axis, basic version, feed rate 54mm/rev, aluminium profile, surface: hard-anodised, neoprene toothed belt in black, guide carriage length 60mm, shaft end support made of aluminium, alignment of drive pin on the right, stepper motor with stranded wire. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

ZLN miniature toothed belt axis based on the low-profile guide system drylin® N. System width 40mm, installation height 28mm. Ready-to-install system with stepper motors or BLDC/DC motors. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space

Housing thermoplastic. Version: Operating principle: Magnetic. Rating: IP67. Note: If the actuator is within the switching range (safety door closed), the safety contacts and, if applicable, the signal contacts of the safety switch are activated. The contact is thus closed via a magnet (magnetic field). Form A: Actuator on one level to the safety switch. Form B: Actuator offset by 90° to the safety switch.

Universal fastening element. The hammer-headed screw is twisted into the profile slot and so can mounted into an existing systems at a later date. The serrations break through the anodised film and creates a secure, electrical conductive connection.

The slot nut is twisted into the profile slot and so can be subsequently inserted into existing systems. The spring-loaded ball allows the nut to be fixated anywhere in the profile slot.

At TRADIUM, tellurium metal is available in the following shapes for industrial supplies: - Tellurium powder - Tellurium ingots - In purities from 99.5% to 99.995% Your point of contact for tellurium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

At TRADIUM, hafnium is available in the following forms for industrial supplies: - Hafnium metal: rods, pieces, sponge, ingots, round bars, wires, sheets, plates - Hafnium hydride powder - Hafnium oxide - Semifinished and finished products and manufacturing according to specifications Your point of contact for hafnium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

Reparative & protective paste for nappy rash , eczema, sunburn, damaged skin. As a moisturizer outsmarts the hyaluronic acid: Compared to HA it hydrates faster (+50%) / more intensively (+20%) / longer (+70%). ALSO FOR ADULTS USE

We know the challenges that new technologies in e-mobility (BEV) entail for established players in the transition from combustion engines to New Energy Vehicles as well as for start-ups in the process of structural development in daily practice. We would be happy to take over for you: quality assurance rework conversions field actions component qualification startup protection Congestion management production management and many other tasks that can be completed quickly and flexibly

At TRADIUM, germanium is available in the following forms for industrial use: - Germanium metal as granules and ingots - Germanium oxide Your point of contact for germanium is: Matthias Rüth Phone: +49 (0)69 50 50 250 - 250 We are looking forward to hearing from you!

At TRADIUM, bismuth metal is available in the following shapes for industrial supplies: - Bismuth granules, ingots, metal needles - Bismuth powder - Bismuth oxide Your point of contact for bismuth is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

At TRADIUM, rhenium metall is available in the following forms for industrial use: - Rhenium powder - Rhenium pellets - Ammonium perrhenate Your point of contact for rhenium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

Housing Form A plastic. Housing Form B die-cast zinc alloy. Active face POM. Housing Form C high-alloy stainless steel Version: Voltage: U = 10 – 30 V DC Function: Normally open Switch type: PNP Mounting type: flush Security type: IP 67 Note: Non-contact, functions wear-free with high switching frequency and accuracy. Non-sensitive to vibrations, dust and moisture. Inductive sensors record all metals without contact. Form C enables screw fastening in a T-slot. Is safe and saves space as the proximity switch lays flush in the slot. Short-circuit proof and reverse-polarity protected.

The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.

TRADIUM is registered as a REACH distributor (Registration, Evaluation, Authorisation and Restriction of CHemicals) for gallium. At TRADIUM, gallium is available in the following forms for industrial use: - Gallium metal - Gallium oxide - Gallium chloride - Gallium nitrate - Alloys on request Your point of contact for gallium is: Matthias Rüth Phone: +49 (0)69 50 50 250 - 250 We are looking forward to hearing from you!

Wall clock made in MDF wood, with dial in white. Presented in an individual box with kraft design. Battery powered (1xAA not included). 1 Battery AA Not Included MDF

Analog wall clock in circular design, with built-in thermometer and hygrometer. Battery power supply: AA type not included and presented in an individual box. 1 Battery AA Not Included

Wall clock made in MDF wood, with dial in natural tone. Presented in an individual box with kraft design. Battery powered (1xAA not included). 1 Battery AA Not Included MDF

Card holder with RFID (Radio Frequency Identification) security technology that keeps card data safe. Resistant aluminum design, with 6 compartments and plain area on the outside designed for laser printing. RFID Protected. 6 Compartments Aluminium

Card holder for smartphone. In resistant material, with RFID (Radio Frequency Identification) security technology that keeps card data safe. 3M adhesive tape, extra strong fixation and residue free when detached from the device. Available in an eye-catching color variety. RFID Protected. 1 Compartment. Adhesive

Card holder with smartphone accessory. In ABS and silicone materials, with 3M adhesive tape, extra strong fixation and residue free when detached from the device. Cardholder for 4-5 cards and available in a wide range of eye catching colors, with finger holder in white color. Adhesive. 1 Compartment ABS/ Silicone