Technical production - Import export

At each stage of research and development throughout your project, we hold strategic planning meetings with the design office and the manufacturing workshops, so that we can fully capitalise on our internal theoretical and practical skills, as well as having co-engineering discussions with your teams. The close collaboration between our development and manufacturing teams enables us to combine theoretical creativity and best practice.. All technical solutions undergo a practical feasibility and optimisation analysis upstream in the manufacturing phases. The various solutions studied are reviewed again, with the final decision being made according to the solution that offers the best balance between technicality, productivity, efficiency and cost.

In close collaboration with your technical and production teams, we target equipment whose cost-effectiveness can most be improved through digitisation. We define the profitability objectives, and then adapt your production facilities and roll-out the most appropriate technical solutions in order to achieve them. Analytics & data interpretation We install the digital tools required for: continuous collection of the generated data analysis and synthesis of the information collected at regular intervals interpretation of the results via secure remote connections at your facilities. Based on the findings, and in close collaboration with your maintenance teams, we organise the following: preventive and/or corrective maintenance programmes actions for improvement follow-up of these actions and the financial gains generated If required, we can perform all the operations needed to support your teams.

Through a representative office in Hong Kong, CIC supports the often difficult procurement of technical products from China, e.g.: efficient search for suitable suppliers direct, native speaker contact with the producer Contract design and processing Supplier Qualification Quality monitoring Logistics control ZURÜCK

Special water saving aerator is used in our faucets. (Foam flow, Lime Crusher) A filter is recommended at the entrance of the flat as it will overcome the damage of any kind of pollution that may occur in the installation. Warranty certificate and invoice are sent in a box for all our products. Battery Technical Dimensions Battery spout length 129.50 mm Battery connection threads 3/4 ”1/2” Ideal work research 34 Bar Our products are made of 1st Quality Brass material. 5 years warranty. Water and pressure testing achieved 100% success in all of our products. Our products are made of healthy materials. Our products are high quality chrome plated

Production of non-standard products according to technical specifications provided by the customer. "Astra" has perfect welding and metal working equipment in-house which could be applicable not only for cylindrical tanks but also for various shapes and various purpose equipment - just give us a hint!

Main Technical Data Production speed Up to 600 pcs/min Production linear speed 300 m/min−max Efficiency 85-90% Optional Machine Features Low waste side panels application Front ears application QCS vision system Product width (min−max) 250-380 mm Product length (min−max) 370-600 mm Required air pressure 6 bars Required air flow Approx. 6,000 Nl/min Noise Lower than, 85 dBA

At PACS we have a advisory service for the development of new formulations for personal care and professional cosmetics products at national and international level. Discover our range of men's care products and the different packaging options available. Hair care products • Shampoo / Shampooing • Conditioners • Hair Mousse • Masks • Hairspray • Shaping mousse For more information about our products, technical data sheets, and/or distribution, please check with our comercial team. We will be pleased to serve you and present you with options adapted to your requirements.

Main Technical Data Production Speed Up to 1000 pcs/min Production Linear Speed 280 m/min max Efficiency 85-90% Product Width (min-max) 70-115 mm w/o wings, up to 165 including wings Product Length (min-max) 180-320 mm Required Air Pressure 6 bar Noise Lower than 90 dBa Basic Machine Features • Top sheet with NW side barriers • Fluff core with short ADL layer • Core anatomic shaped according to customer design • Core embossing according to customer design • Back sheet • Release tape glued on line • Edge sealing & contour cut out according to customer design • Wing tape glued on line Optional Machine Features • Thermo sealing for three pieces top sheet • Videojet printing on ADL • Individual easy wrap fold • Pouch tape • Bypass for straight product

Adult Diaper AD−250 Main Technical Data Production speed Up to 250 pcs/min Production linear speed 200 m/min−max Efficiency 85-90% Product width (min−max) 480-800 mm Product length (min−max) 710-975 mm Required air pressure 6 bars Required air flow Approx. 8,000 Nl/min Noise Lower than, 85 dBA Basic Machine Features Full servo technology Electronic job change High quality multi-zone forming system with 2D/3D core design Inline & stand alone unwinders Automatic splicing units “ZERO SPEED” Automatic web guiding systems Full feature product User-friendly HMI panel Bi & tri-folding systems Horizontal stacking & counting system Advanced QCS system Safety measures conforming to “CE” standards Optional Machine Features Waist band application Long life carbide die cutters Dual core design

Cocoa liquor, also known as "cocoa paste", is the result of grinding cocoa beans, previously shelled and roasted. It is a base product for the production of chocolate. • Cocoa paste (blend) • Cocoa paste from Venezuela (made from Rio Caribe cocoa beans). PRESENTATION: 20 KG For more information about our products, technical data sheets, and/or distribution, please contact our commercial team. We will be pleased to serve you and present you with options adapted to your requirements.

It comes from the pressing of cocoa liquor or paste and is a basic ingredient in the production of chocolate and confectionery products. It is also used in the cosmetics sector. See the three (3) 100% deodorised and two (2) natural butter options available, according to your requirements. Presentation: • Blocks (solid) 25 Kg • Liquid in Bulk (Tanks) For more information about our products, technical data sheets, and/or distribution, please consult our sales team. We will be pleased to serve you and present you with options adapted to your requirements.

Cocoa beans, also known as "cacao beans", are the raw material used to make chocolate. As it is a 100% natural product, the growing conditions (soil, altitude, humidity, among others) have a significant influence on its sensory profiles. Learn about the origins of fine aroma cocoa (representing 5-6% of world production) and find out what is available for your creations: Origin: Venezuela • Rio Caribe Cocoa Beans: Sensory Notes: Cocoa tones and nutty, malty and panela nuances stand out. • Sur del Lago Cocoa Beans Sensory Notes: Highlights fruity, nutty and panela tones. • Carenero Superior Sensory Notes: Peach and red fruit tones are prominent. • Trincheras Cocoa Beans Sensory Notes: Nutty and woody tones. Strong cocoa flavour. • Ocumare Cocoa Beans Sensory Notes: Floral tones, dried fruits and red fruits stand out. PACKAGE: Jute Sacks 60 KG or Big Bags For more information about our products, technical data sheets, and/or distribution, please contact with our commercial team.

At PACS we provide quality food supplements, medicinal plants and sports supplements at the best price on the market. Our vast experience in the industry and international operations allows us to guarantee an optimal, fast, personalised, differentiating and confidential production process, adapted to your needs and existing market regulations. Discover the wide range of products and formats available for your company. Available formats: • Pills • Hard capsules/ Soft capsules • Syrups • Powder (Monodose) • Ampoules (Monodose) For more information about our products, technical data sheets, and/or distribution, please consult our sales team. We will be pleased to serve you and present you with options adapted to your requirements.

For the production and application of industrial goods in car industry we follow the SRPS ISO 9001-2008 ISO norm as well as TRV norm.This understands the specific application during technical production and personal responsability in the use of specific materials for the production of goods used in car industry. We produce air tubes, fuel tubes and oil tubes, shock absorbers, bearers, membranes, floor mats, protection caps resistant to grease and oils... Hemogum can meet car industry customers in production of articles for all renowned car manufacturers. We have the necessary equipment that helps us guarantee high quality, uniformity, excellent physical characteristics and high dimensional precision of our articles. For the production of car industry goods we apply the NR, CR, SBR, NBR, MWQ, FWK

DSEC's commitment on the construction of Biodiesel plants is based on a very specialized technical knowledge of the Biofuels production processes; in this article you will find a more detailed understanding about the process of Methanol Rectification and Glycerin Purification. Methanol Rectification The methanol coming from the upstream process units is fed to the rectification column. The methanol is recycled to reactor loop circuits.

Hotmelt Lamination is the method of bonding two different materials such as Film, Spunbond, Spunlace, Metalize, Towel, etc. with hot glue. Fabrics, films, and glues used in Hotmelt Lamination can be in different features according to the intended use of the product. Hotmelt lamination is performed to increase the product’s technical performance, diversify its functions, add an aesthetic look, and provide other additional features such as liquid and airtightness, toughness, endurance, etc. Areas of Use Medical: Hotmelt lamination technique is used in production of products such as tablecloths, surgery covers, gowns, for companies that manufacture medical sets. Promotion: It is used in products such as bags or dress covers. Home Textile: It is used in products such as tablecloths, wardrobes, white goods covers, etc. Insulation: It is used for maintaining the moisture balance inside as well as to provide heat, water, noise insulation

Fabrics, films, are used in lamination have different properties according to the intended use of the product. The method of melting plastic raw materials under pressure and temperature and then letting them flow onto the surface of the material to be coated is called Coating-Plastering. Unlike hotmelt lamination, glue is not used in the Coating- Plastering technique. Fabrics and films used in Coating-Plastering may have different properties according to the product’s intended use. Coating-Plastering is performed to increase the product’s technical performance, diversify its functions, add it an aesthetic look, and provide other additional features such as liquid and airtightness, toughness, endurance, etc. Areas of Use Medical: It is used in products such as tablecloths, surgery covers, and gowns.. Promotion: It is used in products such as bags and dress cover.

TECHNICAL SPECIFICATIONS: Product to be packed: Yogurt, Lala, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 150-500 ml Speed, max.: 55-60 cups/min Cup material: Plastic cups Lid material: Aluminum Voltage: 220 V, 50 Hz Power: 2 kW Compressed air, max.: 900 litres/min. at 6 bar Dimensions: 2400 x 1200 x 1900 mm Programmable Logic Controller: Unitronics (Israel) BASIC SCOPE OF SUPPLY: Entire frame & guards of the machine is made of stainless steel SS304 with protective acrylic covers and door handles Parts which are in contact with product made of stainless steel SS316 Drive unit for cup & lid-holder disc (there are pins around the cavity on rotary turret to hold the lids. The cups magazine has a step to hold the cups during discharge) Piston filler for viscous products Cup feeder to turret with vacuum cup Magazine for top aluminum lid loading & lidding unit (precut lids) Lid sealing device “NO cup – NO filling” system Inkjet printer for date coding

TECHNICAL SPECIFICATIONS: Product to be packed: Yoghurt, Juice, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 100-500 ml Speed: up to 25 cups/min Cup material: Plastic cups Lid material: Aluminum Voltage: 220 V, 50 Hz Power: 1 kW Dimensions: 1200 x 1000 x 1800 mm Programmable Logic Controller: Unitronics BASIC SCOPE OF SUPPLY: Entire frame & guards of the machine is made of stainless steel with protective acrylic covers and door handles Product hopper without heating and agitator Magazine for cups Magazine for top aluminium lid Complete set of changeable rings for cups with neck Ø 75 mm and 95mm OPTIONAL EQUIPMENT FOR PACKING OF SPECIALIZED PRODUCTS: –Modified filler design for working with products having suspended particles –Product hopper with heating jacket and agitator (for such products as jam, honey, peanut butter, etc.) –Unit for lifting and rotation of cup for uniform filling for high viscous products

Cleaner, solvent-based or without labelling obligation, technical and medical products, cosmetic products in different packagings, pump sprays, canisters, barrels

In order to respond to vintage fashion , Domino Sign offers you a technical product using LG technology . The Domino Sign Lamp Ball allows you a lot of creativity in the creation of signs as in lighting .

1. PRODUCT DESCRIPTION: Raw cashew nuts in shell 2. PRESENTATION: Dried, cleaned, sorted 3. ORIGIN: Ivory Coast, Ghana, Benin, Togo, Guinea Bissau 4. PRODUCTION CALENDAR: March - July 5. TECHNICAL SPECIFICATIONS OF PRODUCT: - Nut counts per kg: 205 max. - Out-turn: 46 - 50 lbs / 80 kg bag - Moisture: 10.0 % max - Defective: 12.0 % max - Foreign matters: 1.0 % max 6. PACKAGE FORMAT: Jute bag of 80 kg. net weight 7. LOADING FORMAT: 20´ container containing 16 MT of goods or 40´ container containing 25 MT of goods 8. DELIVERY DELAY: Within 15 – 20 days after receipt of purchase confirmation and settlement of payment terms agreed 10. DELIVERY CONDITIONS: FOB or CFR delivery 11. PRICE: According current market rates 12. EXPORT DOCUMENTATION: a. Bill of lading (B/L) b. Commercial invoice c. Packing list d. Origin certificate e. Phytosanitary certificate f. Quality and/or quantity certificate 13. PAYMENT TERMS: To agree