Results for
NORELEM FRANCE
France
Fitted with smoothrunning plain bearings. Not suitable for swivelling while under load. When lifting the load, the safety latch closes automatically and is securely locked by a locking mechanism at the rear of the hook. To open the latch, the locking mechanism must be unlocked manually. The swivel hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load
Request for a quoteNORELEM FRANCE
France
Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully.
Request for a quoteNORELEM FRANCE
France
Body tempered. Ball hardened (50 - 55 HRC). Note: Self-aligning pads serve as stops, supports and thrust pads in fixture construction. They can also be installed in existing clamping devices, e.g. arness clamps. Ball is secured against rotation. Drawing reference: Form C: male thread, smooth flattened ball Form F: male thread, serrated flattened ball
Request for a quoteLAVELLA
Turkey
Bathroom Accessory 10 years warranty It is made of 1st class brass material. Stainless can be used safely for 10 years
Request for a quoteNORELEM FRANCE
France
The round slings comply with DIN EN 14922. They are made of highstrength endless polyester fibre cords. These polyester fibre cords are protected by a sturdy and seamlessly woven polyester sleeve. This sleeve surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the protective sleeve of the sling. The safety label with the CE mark and technical data is firmly sewn onto the sling. The colour of the round sling corresponds to the colour code scheme for load capacities of textile type slings. These round slings have high UV resistance and low moisture absorption. These round slings carry the CE mark according to the European machinery directive.
Request for a quoteNORELEM FRANCE
France
Round sling hooks for quick suspension of textile lifting equipment such as hoist belts or round slings. The round sling hook is fitted with a robust, forged safety latch. All edges are rounded to protect the textile slings. The colour of the round sling hook corresponds to the colour code assigned to textile lifting equipment that signifies the permissible loads. The round sling hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load
Request for a quoteNORELEM FRANCE
France
Grade 10. Plasticcoated, red. Latch forged and electro zincplated. Slip hooks with forged latch. The hooks correspond to the Machinery Directive and are BG certified (H stamp). Temperature range From 40°C to 200°C = 100% permissible load Up to 300°C = 90% permissible load Up to 400°C = 75% permissible load
Request for a quoteNORELEM FRANCE
France
Form A: Ball element case-hardened and black oxidised. Form B: Bright. Form C: Ball element case-hardened and black oxidised. Form D: Ball element bright. Form G: Ball element case hardened and black oxidised, foot with anti-slip plate. Note: The anti-slip plate absorbs vibrations and prevents the swivel foot slipping The loading indicated in the table is a recommendation up to which permanent static load the swivel foot can be used.
Request for a quoteNORELEM FRANCE
France
Ball element case-hardened steel. Thrust pad ETG 100 steel.
Request for a quoteNORELEM FRANCE
France
Material: Housing, steel plate. Wheel tread, high quality polyurethane elastomere. Wheel rims, die-cast aluminium. Version: Housing, press-formed. Swivel housing, double-row ball bearings in a swivel head. Ball bearing wheel axle bearings. Note: Wheel axle bolted. Swivel and fixed castors with mounting plate. Application: Heavy loads can be easily transported using this load handling equipment. The roll and swivel resistance is reduced with this new wheel series designed for intralogistic heavy load applications. Temperature range: -25 °C to +70 °C
Request for a quoteNORELEM FRANCE
France
Material: Housing thick steel plate. Tyres steel-wire reinforced elastic solid rubber. Wheel body welded steel. Version: Housing press formed. Reinforced fork, base plate and centre pin. Double ball bearing with hardened shells in the castor head. Precision ball bearings in the wheels. Note: These castors are particularly impact and shock proof and assure a high service life. Wheel axle bolted.
Request for a quoteNORELEM FRANCE
France
Material: Housing steel plate. Wheels with thermoplastic rubber tread. Wheel body polypropylene. Version: Housing press formed. Double ball bearing in the castor head. Plain bearing in wheels. Note: Wheel axle threaded. Swivel and fixed castors with bolt hole. Electrically conductive wheels, non-marking grey. The ohmic resistance of the wheel is less than 10⁴Ω. Application: Electrically conductive wheels on swivel and fixed castors are used to protect against electrostatic discharge generated by transport equipment or the transported goods. Damage to sensitive goods and painful electrostatic shocks to the personal is so prevented.
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Panic hook with movable, straight swivel
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hooks made from solid brass
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hooks made from solid brass
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hook with movable, round swivel
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Snap hooks made from solid brass
Request for a quoteNORELEM FRANCE
France
The double-sided clamp straps are ideal for series clamping. For special applications, the clamping flange can be replaced with another clamping flange by loosening the clamping screw. The clamping flange must always have a contact point on both sides. Functional principle: 1. Use a hand-held or electric tool to tighten the hexagon head bolt (make sure that the maximum tightening torque is not exceeded). When clamping, the clamping flange automatically turns by quarter of a rotation and starts the clamping stroke. 2. Use reverse procedure to loosen the hexagon head bolt. The clamping flange automatically returns to its starting position (the set screw can be used to change the position of the clamping flange). Drawing reference: 1) Hexagon head bolt 2) Slotted round nut 3) Set screw
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Misc. snaps made from zinc die cast and malleable cast iron
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
made from zinc die cast and malleable cast iron
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
made from zinc die cast and malleable cast iron
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
made from zinc die cast and malleable cast iron
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
made from zinc die cast and malleable cast iron
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
made from zinc die cast and malleable cast iron
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
made from zinc die cast and malleable cast iron
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
made from zinc die cast and malleable cast iron
Request for a quoteResults for
Swivelling - Import exportNumber of results
45 ProductsCompany type