Results for
United Kingdom
We have over 10 Million Lines of Components in our Supply. We Supply the FULL Range of BUSSMANN & EATON PRODUCT. Contact me on liamm@merefields.com
Request for a quoteLatvia
With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads).
Request for a quoteUnited Kingdom
The ST-C6FOUSBDP4K-LC XTENDEX® 4K 10.2Gbps DisplayPort USB KVM Extender via CAT6/7 or Fiber provides remote KVM (USB keyboard, USB mouse and 4Kx2K 30Hz UHD DP monitor) access to a USB computer up to 328 feet (100 m) away via CAT6/6a/7 cable, 6.21 miles (10 km) via simplex LC singlemode fiber optic cable, or 1,640 feet (500 m) via simplex LC multimode fiber optic cable.
Request for a quoteUnited Kingdom
KATKO produces an extensive range of safety switches, load break switches, switch fuses, and motor protection switches in addition to accessories for them.
Request for a quoteHong Kong
The Texas Instruments LM2675M-5.0/NOPB is a DC switching regulator that provides a regulated output voltage of 5V with a maximum output current of 1A. It is a step-down regulator that operates at a switching frequency of 260kHz and is housed in an 8-pin surface mount SOIC package.
Request for a quoteHong Kong
The LM5017SD/NOPB is a synchronous buck regulator from Texas Instruments. It is a high-efficiency, low-noise, adjustable switching regulator that can deliver up to 0.6A of output current. It is designed to operate from a wide input voltage range of 4.5V to 36V and can be used to generate output voltages as low as 0.8V. The LM5017SD/NOPB is housed in an 8-pin WSON package and is ideal for applications such as point-of-load regulation, battery charging, and LED lighting.
Request for a quoteGermany
Toggle Switches, Pressure Switches, Rocker Switches, Spare Parts for Switches, Standard Momentary Switches, Vandal-Resistant Switches, Tact Switches, Illuminated Switches Since 1964 the innovative family business Ettinger GmbH has been your dependable partner for electronic and mechanical components. Customers benefit from our wide one-stop product range, excellent stock availability and reliable delivery. Our range covers everything from spacers to switches in many designs. We have more than 28,000 products available from stock. Nationally and internationally many manufacturers have classed us as an A-supplier of the category C parts they require daily. Long-standing collaboration with leading manufacturers guarantees consistently high product quality which is also constantly controlled by our quality assurance system, certified in accordance with DIN EN ISO 9001:2008.
Request for a quoteFrance
Housing thermoplastic. Version: Operating principle: Magnetic. Rating: IP67. Note: If the actuator is within the switching range (safety door closed), the safety contacts and, if applicable, the signal contacts of the safety switch are activated. The contact is thus closed via a magnet (magnetic field). Form A: Actuator on one level to the safety switch. Form B: Actuator offset by 90° to the safety switch.
Request for a quoteGermany
Available in sizes 1/8 - 1/4 - M10 x 1 - M12 x 1.5 - 1/8 NPT Piston pressure switch with control ranges from 30 to 300 bar Diaphragm pressure switch with control ranges from 0.2 to 100 bar
Request for a quotePortugal
KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 4 Pole Switch
Request for a quotePortugal
KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 5 Pole Switch Start-up protection after thermal cut-out For machines. Special prices for quantities
Request for a quoteNetherlands
This series machine is designed and manufactured specifically for the switching industry 2 Automatic feed terminal, loaded terminal / screwing / complete 3. Automatic detection,auto start when there is material, auto cut off when no material detected 4. Automatic counting, set output 5 Using the touch screen, intuitive interface, simple and safe operation 6 Reporting irregular operation and giving the relative solutions in the form of message.
Request for a quoteGermany
Connection via internal or external thread Available in sizes 1/8 - 1/4 - M10 x 1 - M12 x 1.5 - 1/8 NPT Control ranges from 0.1 to 50 bar High-pressure version up to 600 bar
Request for a quoteGermany
Control ranges from 30 to 300 bar. In sizes 1/8 - 1/4 - M 10 x 1 - M 12 x 1.5.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
Adjustable pressure switch type PR as a robust standard model in the pressure range 1 - 10 bar. For converting pneumatic signals into electrical signals. Please also note our separate pressure/temperature/level product range.
Request for a quoteFrance
Housing Form A plastic. Housing Form B die-cast zinc alloy. Active face POM. Housing Form C high-alloy stainless steel Version: Voltage: U = 10 – 30 V DC Function: Normally open Switch type: PNP Mounting type: flush Security type: IP 67 Note: Non-contact, functions wear-free with high switching frequency and accuracy. Non-sensitive to vibrations, dust and moisture. Inductive sensors record all metals without contact. Form C enables screw fastening in a T-slot. Is safe and saves space as the proximity switch lays flush in the slot. Short-circuit proof and reverse-polarity protected.
Request for a quoteFrance
Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto recovery. Protected against short-circuit, overload and surges. Power on LED indicator. For DIN top hat rail mounting. Technical data: Rating: IP00 Protection class: I Standard: UL508, TUV EN60950-1, CE Connection: screw terminals with contact protection Fastening: installation on DIN rail TS-35/7.5 or 15
Request for a quoteFrance
Housing, die-cast zinc. Housing cover, plastic, self-extinguishing. Hinge bolts, die-cast zinc/steel C45. Contacts, silver-nickel alloy 10. Note: The security hinge switches are used for monitoring the position of swing-hinged safety doors, protective hatches and hoods. The protective device is monitored directly in the hinge. By the universally pre-set versions, the switching angle is freely adjustable over the entire working range. A mounting aid ensures the quick alignment to doors and posts. The additional hinges have the same appearance and dimensions as the security hinge switches. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.
Request for a quoteGermany
Error-proofing (PokaYoke) torque screwdriver with limit switch output to eliminate missed tightening. Ideal for assembly processes with torque monitoring. After reaching the set torque, the limit switch transmits a trigger signal. This can be picked up by means of a PLC, for example. At the same time, the slip clutch is activated, making over-torque impossible. Series RTDLS are adjustable models. Along the micrometer scale, the desired torque can be easily and quickly adjusted. A locking mechanism prevents unintentional torque adjustment during use. Series RNTDLS are fixed models without scale and are particularly suitable for repetitive tightening operations at the same torque. An additional auxiliary tool (sold separately) is available for each of the 500 cNm models for easier power transmission. For counting tightening operations, the LS screwdriver can be connected to an optional 'CNA-4mk3', for example. [...]
Request for a quoteUnited Kingdom
Merefields Supply a very wide range of HONEYWELL PARTS, please send email to liamm@merefields.com for a Quote. We have over 10 Million Lines of Components in our Supply!
Request for a quoteUnited Kingdom
WE STOCK A LOT OF HONEYWELL PRODUCTS HONEYWELL RANGING FROM SENSORS , Potentiometers, SWITCHES, WIRE AND MORE. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com
Request for a quoteUnited Kingdom
We offer a Very Wide Range of Brands, please send me enquiry via liamm@merefields.com or enquires@merefields.com
Request for a quoteUnited Kingdom
We offer a Very Wide Range of Brands, please send me enquiry via liamm@merefields.com or enquires@merefields.com
Request for a quoteUnited Kingdom
WE SUPPLY A VERY WIDE RANGE OF PHOENIX CONTACT PARTS. WE HAVE OVER 10 MILLION LINES OF COMPONENTS IN OUR SUPPLY. IF YOU HAVE ANY REQUIREMENT ON THIS PRODUCT OR SIMILAR, PLEASE CONTACT liamm@merefields.com
Request for a quoteUnited Kingdom
WE SUPPLY A WIDE RANGE OF MIL SPEC PRODUCTS, SUCH AS CONNECTORS, CONTACTS, WIRE, TERMINALS, SENSORS AND MORE. WE SUPPLY ALL THE MAIN BRANDS FOR THIS INDUSTRY, TO NAME SOME AMPEHNOL, CORSAIR, TYCO, CINCH, CARISILE, POSITRONIC AND MORE. WE HAVE OVER 10MILLION LINES OF COMPONENTS IN OUR SUPPLY. PLEASE SEND liamm@merefields.com FOR QUOTE REQUESTS
Request for a quoteFrance
The cam-type limit switch is a device used to control the movement of industrial and construction machinery. Information is transmitted via the shaft actuating micro-switches. Standard range BFCN: Gear ratio from 7.5 to 550 Number of cams from 2 to 5 Maximum rotation speed: 500 rpm IP55 Range BFRS: Gear ratio from 10 to 200 Number of cams 2 or 4 Maximum rotational speed: 500 rpm IP55 Options for both ranges: potentiometer, gear wheels, couplings, mounting flange, various cams The micro-switches are either deflection type or with positive opening. The choice between different types of cams allows to modify the reaction curve of the limit switches. On request, specific versions: Up to 12 cams Protection IP66 / 67 /69K Integrated potentiometer or encoder ATEX zone 2 and 21
Request for a quoteResults for
Switches - Import exportNumber of results
307 ProductsCountries
Company type
Category