Results for
NORELEM FRANCE
France
R-clips are used for securing bolts and axles. They are easy to install and can be reused. The ends have no sharp edges. Double coil R-clips have a flatter spring characteristics and are easier to install. The double coil allows a tether cable to be attached to prevent loss. Drawing reference: Form E: with single coil. Form D: with double coil (coil direction can differ from the drawing).
Request for a quoteNORELEM FRANCE
France
The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.
Request for a quoteNORELEM FRANCE
France
The flat gooseneck allows lower steps on the workpiece to be machined or clamped. When using spherical washers 07420 use Form G.
Request for a quoteNORELEM FRANCE
France
Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G.
Request for a quoteNORELEM FRANCE
France
For suitable supports and adjustable rest pads, see 02130 and 02150.
Request for a quoteNORELEM FRANCE
France
The lateral spring plunger must be pressed into the hole to at least depth L3. These plungers are for positioning and holding small parts in fixtures. If mechanical machining of the workpiece is to be carried out, other clamps may be necessary. When the fixture is not in use it should be ensured that plastic springs are not under stress. Spring force refers to a mean value.
Request for a quoteNORELEM FRANCE
France
These eccentric bushes can be used as e.g. stops or tolerance compensators. 1) DIN 332-1 centre bore, Form A 2) Basic form with centring 3) With scale groove for visual stop 4) Through hole 5) Tapped hole Advantages: Easy handling Grub screw clamping Minimal installation space Arbitrary mounting position Customised application Versatile use
Request for a quoteNORELEM FRANCE
France
Eccentric bushes enable lateral spring plungers to be precisely positioned with regard to the workpiece.
Request for a quoteNORELEM FRANCE
France
Tapped cylindrical pins are chiefly used in blind holes. The milled flat prevents air compression in blind holes. The tapping makes it possible to use the extractor 03328.
Request for a quoteNORELEM FRANCE
France
The dimensions of the dowel pin comply with DIN 6325. Advantages: Ideal for fixture construction Dimensionally stable even at high temperatures Electrically insulating
Request for a quoteNORELEM FRANCE
France
The nominal diameter of the pin is the same as the receiving hole diameter. The recommended hole tolerance is ISO H12. Due to the chamfered end, the pins can be inserted easily into the hole with a hammer or using automatic placement. After insertion, the plus tolerance of the pins results in a vibration-proof seating. The pins can be easily removed using a mandrel and reused several times. The pins can transmit high shear forces and are resistant to shocks and impacts due to their spring properties. The values specified for the shear force only apply to spring steel.
Request for a quoteNORELEM FRANCE
France
Hardened and ground, precision grade 1, paired tolerance IT 5, nominal dimensional tolerance DIN ISO 2768-mK On request: Several matched pairs.
Request for a quoteNORELEM FRANCE
France
Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
Request for a quoteNORELEM FRANCE
France
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)
Request for a quoteNORELEM FRANCE
France
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)
Request for a quoteNORELEM FRANCE
France
On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Grid hole pitch 25 ±0.01 mm or 50 ±0.01 mm. Grid hole plugs and ring bolts for lifting are supplied. These subplates conform to subplates for machine tools according to DIN 55201 and JIS 6337-1980. The subplates are also available without grid holes. See plates without a value for “A” (xxx/-). Other dimensions on request.
Request for a quoteNORELEM FRANCE
France
Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)
Request for a quoteNORELEM FRANCE
France
Steel, bright. Stainless steel A2, bright. Stainless steel A4, bright.
Request for a quoteMARCEGAGLIA BALTICS
Latvia
Steel metal plates, or cut-to-length sheets represent the common used steel material for several application sectors: construction equipment, street furniture, shelving systems, household appliances, engineering and automotive. Thanks to its unique fabrication network and quality system, Marcegaglia Baltics range of carbon steel sheets is fully compliant to these markets’ requirements in terms of grades, dimensions and mechanical properties.
Request for a quoteMARCEGAGLIA BALTICS
Latvia
Possibility of packaging on pallets or timber lumps with or without sticks tied to the pack. Packaging with waterproof, anti-corrosion combination paper/film or without. Metallic or plastic packing tape. Packing cardboard corners are used to ensure the preservation of the sheet edges of a delicate material. Choose the right packaging for various options – different unloading transport and storage types.
Request for a quoteMARCEGAGLIA BALTICS
Latvia
20 standard types of packaging Euro pallet or universal pallet Coil eye up and coil eye to the side Possibility of packing without a pallet in special transport (tray box/mould) Metallic or plastic packing tape Paper or stretch film Choose the right packaging for various options – different unloading transport and storage types
Request for a quoteMARCEGAGLIA BALTICS
Latvia
Marcegaglia’s wide range of steel strips (P&O, CR, HDG) is engineered to match both standard and specialty requirements of target industry sectors. Thanks to its production and logistics features, Marcegaglia Baltics can create unique synergies for customers, integrating their supply chain and industrial processes creating purchasing efficiency, cost competitiveness (price optimization) and the development of more performing grades or products while guaranteeing the supply of existing codes.
Request for a quoteMARCEGAGLIA BALTICS
Latvia
Marcegaglia’s wide range of steel strips (HR, P&O) is engineered to match both standard and specialty requirements of target industry sectors. Thanks to its production and logistics features, Marcegaglia Baltics can create unique synergies for customers, integrating their supply chain and industrial processes creating purchasing efficiency, cost competitiveness (price optimization) and the development of more performing grades or products while guaranteeing the supply of existing codes.
Request for a quoteMARCEGAGLIA BALTICS
Latvia
Steel metal plates, or cut-to-length sheets represent the commonly used steel material for several application sectors: construction equipment, street furniture, shelving systems, household appliances, engineering and automotive. Thanks to its unique fabrication network and quality system, Marcegaglia Baltics range of carbon steel sheets is fully compliant to these markets’ requirements in terms of grades, dimensions and mechanical properties.
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4462 (X2CrNiMoN22-5-3) Method of manufacture: hot-rolled, 1D Surface finish: pickled Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 4 - 10 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteResults for
Steel-%20special - Import exportNumber of results
104 ProductsCountries
Company type
Category