Steel profiles - Import export

Round steel / Square steel, Flat steel , L cornier profile , IPE Steel and much more

Stainless steel 1.4404. Version: Satin finished. Note: The hinges are made of weldable profile steel. The pin is fixed into the lower part of the hinge. The differing steel qualities of the weld and the beam onto which the hinge is welded must be at least equal to or better than: Stainless steel 1.4404

1. Advanced CNC machining center with servo turning table and 4 servo clamps. 2. Suitable for processing aluminum profiles (up to 3mm thick) and steel profiles (up to 2mm thick) with super fast speed (5m/min) and efficiency thanks to laser technology. High pressure air compressor (1.6Mpa) and cooling station are included. 3. The machine completes milling, drilling, chamfering, slotting and other multifunctional precisely in one time. 4. The work table will be positioned from +90° to -90° variable angle. 5. Automatic lifting safety cover ensures operator safety. 6. Automatic tool change: standard equipped with 6-position hidden tool magazine, standard equipped with 3 tool holders. 7. Operation in Windows environment industrial PC with monitor. Friendly machine interface with user-friendly operation. 8. In line with ERP software, it can perform code scanning and automatic processing.

It has a fixed 8-position tool changer and a carriage to which another tool changer can be attached, always with 8 positions. Thanks to its numerous versions, 1500×3000, 1650×4000, 1650×6000, 2000x 4000 and 2000×8000, the PWI has found various applications in the industrial sector, for example in plastics, aluminum and agglomerates in general. Special versions can be supplied for milling and threading steel profiles and/or bars. PWI offers a wide Z to hold i supports and to hold particular profiles. In its complete version with clamps, it allows alternating compounds and profiles, in order to optimize the machine for different applications in a single work environment. This machine is usually chosen for its versatility and speed, with an interpolation of up to 40 m/min. In this case, CADCAM ITALMAC provides this version of CNC with all the DXF and geometric figure import tools, so that the PWI is recognizable compared to other similar machines.

Usage/Application . Industrial Fork Length . 280 mm Min Height 75 mm Weight Over Fork . 150 Kg Pallet Truck Weight . 35 Kg Finish . Coated

WATTSAN М9 1325 has a working area of 2500х1300х200 mm and a T-slot slatted table. The complete set of the machine includes a water-cooled spindle with the power of 7.5 kW and ER-32 collet chuck. The portal is driven by YASKAWA servomotor and steppers. The milling machine is controlled by an operator through Weihong NCStudio control system. Unlike the junior model, this machine supports the automatic tool change option. The machine body is a welded structure made of steel profile; the weight of the machine is 1500 kg. The maximum travel speed along the axes is 50 000 mm/min; the maximum travel speed during operation is 20 000 mm/min. The spindle speed reaches 24 000 rpm. The machine is controlled by NCStudio software. On request, the machine can be equipped with a vacuum table, a DSP-controller, a Syntec control system, an aspiration system, a more powerful spindle or an additional spindle, a rotary device to process cylindrical objects, and a tool sensor.

WATTSAN М1 1313 has a grid type working table of 1300×1300×200 mm, but additionally we can install a vacuum table, that holds the sheet material in place and significantly ease the process. The construction includes a spindle ER-25 with collet and power of 2.2 kW, water cooling system. The portal moved by step engine driver Leadshine 860. Operator controls the machine with control system NC-Studio. Frame of the machine is welded from steel profiles construction; weight of the machine is 700kg. Max speed of spindle movement along axis is up to 25 000mm/min, max working speed is 15 000mm/min. Spindle rotation speed can reach 24 000 rpm. We can modernize the machine with the following: vacuum table, DSP controller, chip removal system, automatic lubrication, more powerful spindle or additional cutting heads, rotator for cylinder shaped parts, tool sensor.

WATTSAN A1 1313 machine has a working field of 1300×1300×200 mm, an ER-20 spindle with a power of 2.2 kW, and a water cooling system. A stepper motor controlled by the Yako 2405 driver is responsible for moving the portal. The body of the machine is a welded structure made of steel profile, the weight of the machine is 500 kg. The maximum travel speed along the axes is 25,000 mm/min, the maximum speed in operation is 15 000 mm/min. Spindle speed can reach 24000 rpm. The table has a slatted T-slot cover. The machine is controlled by NcStudio software. To upgrade this machine, we can install: vacuum table. DSP controller. Chip removal system. Manual auto lubrication. More powerful spindle or additional cutting heads. Rotary device for processing cylindrical products. Tool sensor.

WATTSAN M1 6090 machine has a working field of 600×900×200 mm with a slatted table cover. A spindle with an ER-20 collet chuck and a power of 1.5 kW, together with a water cooling system (for stable operation of the machine) are included in the basic package. The body of the machine is a welded structure made of steel profile, the weight of the machine is 500 kg. The maximum movement speed along the axes is 25000 mm/min, the maximum speed in operation is 15000 mm/min. Spindle speed can reach 25000 rpm. The machine is controlled by NcStudio software. To upgrade this machine, we can install: DSP controller.

PVC roof windows are made of white plastic profiles with their 112-mm frame depth and 115-mm casement (leaf) depth. These profiles are reinforced with solid, galvanized steel profiles both in the casement (leaf) and in the frame. The pivot system with increased rotation of the shaft which guarantees the ease of use. Humidity-and-temperature-changes resistant\ Mounting frames for flat and corrugated roofing Sheet metal parts RAL 8019 (brown) or RAL 7043 (grey).

SuperChannel Bender XP automatically performs the edges of your letters from coils of aluminum, stainless steel, profiles and other materials 0.6 to 1.6 mm thick and 20 to 200 mm high ( see table of characteristics). The flat bands are folded thanks to: a tool of reinforcement folds (Flange Tool) facilitating the fixing of the bottom of the letters to the edges. a grooving tool allowing the bending of acute angles. a new innovative hole-drilling system (Punching Tool) for direct riveting of the strip on the bottom. Coupled with the automatic management of an Overlap and the use of pre-lacquered strips, this machine allows you to save the usual operations of welding the base and painting the edge!