Separators - Import export

2x bearing separator jaws  2’’ and 3’’ jaws  4x hex push-puller legs  4’’ and 5’’ extension legs  6’’ yoke with center adapter

Pressure containing equipments - Horizontal separators - Separators

Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar

Combined pass-through with integrated two-way intercom system. Use in petrol station forecourts as late-night counter, gatehouses and kiosks. Upper small drawer with coin tray for quick removal of cash and passing through receipts, lower drawer for passing through objects up to 170 mm high, such as 5-liter petrol canisters. Third drawer for passing through PIN pad reader.

Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced. Form B: Fasten the floating clamp with M6 fastening holes to a fixture. Adjust the height stop and pivot range using the blue adjusting sleeve and clamp with grub screws (4x AF 2.5). When setting the height limit, allow ample play at the top. For specific clamping situations, the standard jaw plates can be modified or replaced.

Mouth opening: 22 – 18mm  Mouth opening: 19mm  Mouth opening: 19.5mm

1 x tie rod spreader with 11/16” (17.5mm) wedge opening  1 x ball joint separator with 15/16” (23.8mm) jaw opening,  1 x pitman arm wedge with 1-1/8” (28.6mm) opening,  1 x 7-3/4" (196.9mm) Kunrled striking handle for use with conventional hammers  1 x 6-3/4" (171.5mm) adapter handle for use with air hammer

 9 x Adapters  1 x Center Rod  1 x C-Frame  1 x Install Adapter  1 x Install Cup  1 x Install Cup Adapter  1 x Receiving Cup  3 x Receiving Tube  1 x Removal Adapter  1 x Screw  1 x Sleeve

Phase separator (production/test)

Telescopic Rail 35.2 x 19 mm, Galvanized Steel, Standard Lengths up to 660 mm, Load Capacity up to 52 kg per Pair Ball Bearing Over-extension Load Capacity up to 52 kg per Pair Standard Rail Length up to 660 mm Separable Inner Rail Locking in Open Position Closed End Stop Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high loads. High functional reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH in stock and from a quantity of one piece upwards.

Ball bearing partial extension slides with a 70-80% extension length Load capacity up to 56 kg per pair Standard rail length up to 660 mm Separable inner rail Locking in the open position Closed end stop Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.

Telescopic Rail 45 x 12.7 mm, Galvanized Steel, Standard Lengths up to 600 mm, Load Capacity up to 40 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 40 kg per pair Standard Rail Length up to 600 mm Separable Inner Rail The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

Zinc plated and lacquered flower box with separator

Zip fastener in dantrene wire, uninterrupted-chain zip fastener, separable zippers, invisible zippers, sliders. For more infos check our webpage in the website description.

Separation of dissolved gases with membrane degasification Gaseous components can be removed by conventional technologies, like e.g. percolators columns (for example CO2-percolators). Alternatively, gaseous components in water can be removed with very high retention rates by membrane degasification, which is working with hydrophobic membranes and a partial pressure drop. The advantages of the membrane degasification are low operation costs as well a s compact design.

Oil-water-separation / degreasing bath treatment Treatment of oil-water-emulsions for surface treatment (e.g. pre-treatment of metal parts for ed-paint), recovery companies (e.g. for the treatment of alkaline emulsions for part washing), and so on. Separation of emulgated oil particles and recycling of the cleaned liquid into the degreasing bath Concentration of oil-water-emulsions for disposal Cleaning of the oil-water-mixture for indirect lead-in Principle of this process: Aqueous degreasing baths content a tenside combination, alkalines like soda, caustic soda, phosphate, silicate and further complex molecules. The degreasing bath is loosing its efficiency, when to oil content reaches some g / litre. External pollutions also degrease the degreasing efficiency. By ultrafiltration, the oil content can be separated from the degreasing bath and the oil will be collected in the concentrate. The degreasing bath will be dumped into a buffer tank and then pumped in the working tank of the

Centrifugal Concentrator with floating bed model 110 is designed for high-quality gravity concentration of fine material (sand and alluvial deposits of crushed ore) containing free gold, silver and platinum, in the industrial extraction of small and fine fractions of precious metals and other heavy valuable minerals. Performance on hard, kg / h: - 200. Gold recovery of size, % +50 microns 96- 99 + 10-50 microns 92-96 + 3-10 microns, 50-92

This model of Centrifugal Concentrator is designed for high-quality gravity concentration of fine material (sand and alluvial deposits of crushed ore) containing free gold, silver and platinum, in the industrial extraction of small and fine fractions of precious metals and other heavy valuable minerals. Performance on hard, kg / h: - 1000. Gold recovery of size, % +50 microns 96-99 + 10-50 microns 92-96 + 3-10 microns 50-92

The centrifugal concentrators a various productivity with a floating bed are designed for high-quality gravity concentration of fine-grained material (alluvial sands and crushed ores) containing free gold, silver and platinum, in the industrial extraction of fine and fine fractions of noble metals and other heavy valuable minerals.

THIS PRESEPARATOR UNIFORMLY MAINTAINS SUCTION CAPACITY AND PROTECTS FILTERS

Special heat resisting and wear resisting materials are needed in the limestone and cement production. Already since many years we develop and supply high quality casting parts that fulfill these requirements and extend the service time of your production facilities. In order to achieve this, we produce tailored products in close collaboration with our customers that are designed to meet the special demands. We also consult you in questions regarding the choice of the materials and the design. In addition to that, CS-specific-materials and CS-design-developments show our capability.

The grinding and the combustion of natural resources such as wood and coal for energy production causes abrasive and thermal wear and decreases the service time of its wearing parts. For problems we offer you a consistent solution: we develop and supply ready to install wear-cast-parts made out of heat resisting gray cast iron, highly heat resisting stainless steel casting and wear resisting heat treatable steel. The use of CS-specific-materials results in a higher service life. Our grate bars can be found in roller grates, feed grates, traveling grates or horizontal grates. The development and manufacturing of water-cooled grate bars is also part of our product line. Our services include the preinstallation of single grate lines in order to check the dimensional stability and quality. We can also offer customer specific solutions for the entry area and the outrun area of rotary kilns in the field of grinding tools and crushing tools.