Screws for plastics - Import export

Delivery program: Plastic Screws From M3 x 20 mm to M10 x 60 mm. Plastic Knurled screws DIN 653 from M3. Plastic Transverse-hole screws DIN 404 from M3 x 20 mm. Plastic Nuts From M3 Plastic Threaded pins DIN 551 from M3 Connection elements Other connection elements such as discs, caps, spacers and diverse articles moulded from all commercially available plastics (granulate). All articles are available with the specifications listed next. Materials: Articles moulded from PA, POM and all other plastics (granulate) commonly available on the market. Standards: According to DIN/EN/ISO or drawings. Colour: According to RAL table or individual customer wishes.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 2 mm Head: hemispherical with press washer, Philips No2 slot, M = 4.5-5.1

EF-PLUS 30 screws are just made for perfect assembly for thermoplastic material with special 30 degree thread angle.

This item refers to DIN 1587 but P6.3 material is not guaranteed by norms

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Housing polyamide 6. Hollow shaft steel. Screen plastic. Grub screw steel. Version Impactresistant housing. Hollow shaft black oxidised. Grub screw black. Dial black, digits white. Note Position indicators allow direct reading of input measurement values at a glance. In addition, the value indicated per spindle rotation (corresponding spindle pitch) can be selected and the various indicator values are realised by a transmission gear. The position indicators are distinguished by their small construction with very clear display. They are especially suitable for small spindle distances and small shaft diameters and have a torque support that is positioned in a hole on the side. ** At the 1st asterisk give assembly position and at the 2nd asterisk give the count direction (see sample order “assembly position, count direction”). Technical data – Counter consisting of 3 10position dials – Height of figures about 4 mm – Hollow shaft Ø 10 H7 mm

Tecnimodern automatic counting and weighing machines allow you to count and weigh different parts such as screws, nuts, washers, parts (metal or plastic), dowels, small hardware, confectionery. Thanks to the simple set-up, you can switch from one type of part to another in a few seconds. The frame counting cell, controlled by the PLC and equipped with a filter, counts only parts and no waste. Weighing is performed by a calibrated scale. The control panel allows very easy access to the settings and displays errors in plain text.

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

The semi-automatic capper model 'TSP' is suitable for applying aluminum (or plastic) screw caps to glass bottles. This semi-automatic machine is made of stainless steel and features a pneumatic bottle lifting system. The caps are manually placed on the bottle, while the operation cycle is activated with 2 buttons on the side of the machine. The machine operates electrically with a contactor and CE-compliant safety guards. After the cap is threaded and sealed, the platen automatically descends, allowing the removal of the capped bottle and replacing it with another to be closed. The capping head has 4 stainless steel rollers and comes with a No-Cap No-Roll safety device, suitable for all types of closures, including Stelvin 30x60 caps. It is suitable for all standard bottle sizes ranging from 25cl to 150cl. A magnetic friction head is available for pre-threaded plastic caps or twist-off caps. Production capacity: approximately 600 bottles per hour.

These cappers are designed for closing aluminum or plastic screw caps, or crown caps, on cylindrical or shaped bottles. Caps feeding is done using a centrifugal, rotary, or vibratory feeder, and the transfer of the caps is achieved through a descending channel that ends with the distribution head. The stainless steel threading heads with 4 rollers (with 'no cap/no roll' device) allow for excellent threading and capping of a wide range of caps. Standard features include: - Centrifugal Feeder - Inverter for speed adjustment - PLC for cycle control - Production display and anomaly signaling - Bottle height format management from PLC - 2 photocells on the cap descent channel - Photocell for exit accumulation control on the conveyor belt - Inlet selection screw - Safety guards and stainless steel electrical panel - Electric lifting of the capping head Production capacity: from 3,000 to 12,000 bottles per hour.

The automatic single-head cappers are designed to apply aluminum caps or screw-on and snap-on plastic caps to glass or PET bottles. All closure heads are made entirely of stainless steel, as well as most of the machine components. The speed variation is electronic, controlled by an inverter. Other capping systems are available to meet different needs: cork, crown, twist-off. It is also possible to combine 2 turrets on the same machine with different combinations, for example, screw cap + cork, cork + crown, screw cap + T-cork. The range of single-head cappers is designed for productions of up to approximately 2,500 bottles per hour and can be integrated with automatic cap feeding systems of both mechanical and pneumatic types.

We produce our single screw extruder machines for different plastic extrusion solutions. Such as with different extrusion screw design, screw length and diameter range according to final product of our customers and requested capacity. Our single screw extrusion machine can work with different raw material such as PVC, PP, PE, TPO, TPE, TPU, EVA, PET, PS, WPC, ABS, HDPE, PC, TPR, PEX, PA, etc. We provide for our customers the optimum solutions according to their final product, raw material and capacity demand.

screw eyes screw Tensor- galvanized Tensor-+ powder coated* Plastic Tension wire holder* Fence clamp Ø42mm, Ø48mm galvanized Fence clamp Ø42mm, Ø48mm galvanized + powder coated* Fence clamp Ø60mm galvanized Fence clamp Ø60mm galvanized+ powder coated*** Fence clamp 50 x 50 galvanized Fence clamp 50 x 50 galvanized+ powder coated* Fence clamp 70 x 70 galvanized Fence clamp 70 x 70 galvanized+ powder coated**** Fence clamp 80 x 80 galvanized Fence clamp 80 x 80 galvanized+ powder coated* Plastic cap Ø42mm, Ø48mm* Plastic cap Ø50mm***** Plastic cap Ø60mm*****,, Plastic cap 60x40mm **, Plastic cap 50x50mm***** Plastic cap 80x80mm***** thimble galvanized Ø42mm, Ø48mm, thimble galvanized + powder coated***, channel bar galvanized + powder coated, Barbed wire,,, Rectangular fence clamps 60x40mm, galvanized,,, Rectangular fence clamps 60x40mm, galvanized + powder ,coated*, Plastic cap 60x40mm*****,,,Galvanized bar Ø 6,0 h=1,5m,,

We produce our twin screw extruder machines for different plastic extrusion solutions. Such as with different extrusion screw design, screw length and diameter range according to final product of our customers and requested capacity. Our twin screw extrusion machine can work with different raw material such as PVC, PP, PE, TPO, TPE, TPU, EVA, PET, PS, WPC, ABS, HDPE, PC, TPR, PEX, PA, etc. We provide for our customers the optimum solutions according to their final product, raw material and capacity demand.

Product Features: • Attractively styled and ergonomically designed for use as a "hand-held" instrument enclosure. • Standard version is moulded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings. • Economy version is moulded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts. • Recessed top for membrane display or pad. • Lap joint construction provides protection against access of dust and splashing water. • Extra deep and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Two keyhole knockouts are moulded into the inside of the base to facilitate wall mounting installation.

Product Features: • Ideally suited for vertical mounting of printed circuit boards (internal side walls include moulded in card guides). • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Standard versions are moulded from easy to machine flame retardant ABS plastic, which carries a UL flammability rating of 94V-0. • Economy versions are moulded from general purpose (not flame-retardant plastic). • On standard versions the lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Economy versions are assembled with self tapping screws into fully plastic posts. • Black enclosures include black screws, while all others include standard nickel finish screws.

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn