Rubber feet - Import export

Aluminium, nitrile rubber Note: The machine feet with vibration absorption remain vertically and horizontally stable, even in the presence of strong vibrations. Permanent loads are optimally absorbed thanks to the high quality rubber-metal joint. The machine feet can be screwed onto the machine using a threaded spindle. Supplied with Threaded spindle M16X105 is supplied fully assembled as part of delivery. Drawing reference: 1) Shore hardness

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Rescue Rucksack Viper made of red nylon The tear-proof and waterproof fabric allows safe use even in precarious weather conditions Equipped with double handle (upper or lateral) for easier transport Equipped with front, side and rear reflective strips (on padded shoulder straps) The part in contact with the back of the user is equipped with cushions Large front opening pocket with 2 internal elastic bands for the fixing of material 3 external perimeter pockets: two little ones at the ends of the second handle and a big one on the opposite side. 8 removable coloured pouches with transparent front and Velcro strips Internal central partition with zipper, complete with elastic bands for the fixing medical devices Reinforced bottom and rubber feet Dimensions: about 46x26x50cm Weight: about 3.8kg Maximum weight capacity: 40kg It can be washed by hand at a maximum temperature of 30° C Supplied empty but can be equipped with medical devices upon customer request

Product Features: • Made of strong, economical 20 gauge steel. • Rugged powder coat finish: beige panels with textured black covers. • Choice of sloping or vertical front panels by reversing case. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • 20 gauge steel cover and 18 gauge base and frame (for strength) finished in beige. • Easy to machine .064" thick aluminium panel painted stain black. • Assembly screws and self-adhesive rubber feet included.

Product Features: • Aluminium cases 0.081" (2mm) thick aluminium. • Aluminium top panel sizes to 14" wide are 0.064" thick aluminium. Larger sizes are 0.081" thick. • Sold pre-assembled with a textured blue case and a choice of a contemporary grey (beige) or a black top panel. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Solid oiled walnut sides on a black, ventilated steel base. • Solid wood sides are real walnut - each piece has a unique colour and grain. • Aluminium top panel is powder painted in a satin contemporary grey (beige). • Aluminium top panel sizes are 0.064" thick aluminium. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Convection ventilation is provided by slots in the bottom and removable rear panels. • Aluminium case is finished in satin blue with a contemporary grey panel. • Vented back panel, bottom, and sides are made from 0.081" thick aluminium • Sloped front panel is made from 0.064" aluminium • Supplied with hardware and rubber feet.

Product Features: • 18 gauge steel base for extra strength. • Easy to machine - aluminium top panels are 0.064" thick aluminium. • Sides include vertical rows of ventilation. • Sold pre-assembled with a two tone grey powder paint finish (base is dark satin grey, slope top is smooth light grey). • Comes with four self-adhesive rubber feet and required hardware.

Product Features: • Top and bottom made in 20 gauge steel (for strength) and finished in beige or satin gulf blue powder coat. • Easy to machine 0.064" thick aluminium panels front and rear. • Rear panel and bottom of enclosure is vented. • Front panel is satin black, rear panel matches case colour. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • Top and bottom made from 12 gauge aluminium finished in beige. • Top and bottom are attached to an internal aluminium extrusion which contains mounting slots for printed circuit boards or panels. • Front and rear panels are natural aluminium (paper coated one side) which are attached with screws to the aluminium mounting extrusion. • Panels can be easily removed for access to components. • Tops and bottoms are available in solid or with vent slots. • All hardware and self-adhesive rubber feet are included. • Replacement hardware packages include front panel screws, side screws, extrusions, and rubber feet.

Product Features: • Heavy duty, 18 gauge steel top and bottom halves finished in beige powder coat. • Easy to machine 0.064" thick aluminium panels, front finished in textured black and vented back finished in beige. • Rear panel is vented at top and bottom. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models are adaptable to a wide selection of Arduino's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Arduino boards are not included.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Boards are not included.

Product Features: • Heavy duty, 18 gauge steel - top and bottom case in satin black or gulf blue powder coat. • Available with either sold or vented tops and bottoms. • Easy to machine 0.064" thick aluminium front and rear panels (one satin black and one contemporary grey for each enclosure). • Symmetrical design so either end panel can be used as a front or rear panel. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include two horizontal rows of ventilation. • Choice of sloping or vertical sides by reversing case. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware.

Product Features: • All steel, heavy duty construction designed to house heavy, heat producing items such as power supplies. • Bottom of unit is 16 gauge steel, top is 18 gauge steel. • Finished in a rugged beige powder coat. • Top half is of an upside down "U" shape design for easy removal, bottom half is also "U" shaped but includes a fold on all sides including front and back for extra strength and mounting of top case. • Top case section is heavily ventilated for excellent air circulation with an attractive slant (also doubles as a lifting area - both front and back). • Top lip extends 0.75" (19mm) on both sides adding 1.5" (38mm) to the total depth. • Bottom is solid except for 4 holes for mounting heavy duty rubber feet. • Includes nickel plated self-tapping screws and screw on 0.75" (19mm) high, rubber feet (1421T7).

Product Features: • Spot welded steel - heavy duty construction chassis. • Finished in ASA 61 smooth grey or satin black powder paint. • Optional bottom plates are punched with 4 holes - 316" diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates). • Rubber feet sold separately. • Some models accept chassis covers (1451 Series). • Upgrade to the Satin Black Chassis with Walnut Sides (available for some sizes).

Product Features: • Moulded in a choice of general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models feature either dual camera mounts (inside or outside) OR a touch screen mount. • Enclosure top and bottom halves snap together. • Includes four (4) self adhesive rubber feet and instruction sheet. • Development boards, cameras, and touch screens are NOT included.

Product Features: • Rear of unit contain one or two (depending on console size), flat removable panels for easy modifications. • Standard versions are moulded from flame retardant ABS plastic. Material carries a UL flammability rating of 94V-0. • Economy version is moulded from general purpose (not flame retardant) ABS plastic. • Includes 4x black rubber feet per enclosure. For replacement packs of 24 feet, see part number 1421T2.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include one horizontal row of louvers for ventilation. • Choice of sloping or vertical sides by reversing case. • Includes an handle (Part number 1427C1) and holes in the top for mounting. Also includes plastic plugs if handle is not desired. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware. • Assembled with 8 machine screws into weld-nuts for repetitive assembly and disassembly.

Product Features: • Heavy duty construction walnut chassis. • Top panel available in a choice of natural aluminium or satin black powder paint finish. • Walnut chassis is 0.778 inches thick (19.8mm) - corners are produced with wood bracing and dovetail construction methods. Designed to handle heavy components. • Top panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2mm) thick. Fully "framed" support from walnut chassis. • Includes four large ground rubber feet (0.75" dia. x 0.56" high) with mounting hardware into inserts to avoid wood damage. Hardware is of proper length to allow use of optional bottom plate.

Product Features: • Strong construction yet light weight using all aluminium components. • Suitable for desk top or rack mountable applications. • Knockdown design ships un-assembled for easy handling and shipping protection. • Strong construction using: • Extruded aluminium side panels 0.125" (3.2mm) thick • Extruded aluminium front and rear panels 0.125" (3.2mm) thick • Flat aluminum top and bottom panels 0.064" (1.6mm) thick • Can be used with or without rack mounting brackets (one pair included). • Front and rear panel are interchangeable. • Enclosure is finished in rugged, textured, black powder coat. • Includes top, bottom, side, self adhesive rubber feet, rack mount brackets and all assembly hardware. • Pull handles and adjustable rear bracket rack mount kit (for deeper models) are not included with unit. • RoHS compliant. • Manufactured in North America.

Product Features: • The Bench Case is a British-designed plastic enclosure. • Ideally suited for mounting printed circuit boards for use in bench top applications. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with plastic top and bottom, removable aluminium front panel, four rubber self adhesive feet and four self tapping screws. • The top panel and bottom halves include a flat display area, perfect for labels or silk screening. • The base is moulded with six bosses for easy P.C. board mounting. • The removable 1.5mm thick aluminium end panel is securely clamped by the two box halves and easily customised. • Hole in rear of enclosure for easy cord access.

Product Features: • Uses all machine screw and PEM nut construction, perfect for applications where repetitive assembly and disassembly are required. • Light weight design - all aluminium, type 5052 H32 for easy modification. • Strong design construction using: • 0.125" (3.2mm) thick - side panels and rack mount brackets • 0.064" (1.6mm) thick - front and rear panels • 0.062" (1.6mm) thick - top and bottom panels • Can be used with or without rack mounting "ears" or brackets (included). • Enclosure is finished in rugged, satin texture, black powder paint. • Includes top, bottom, side panels, front and rear panels, rubber self adhesive feet, rack mount brackets are all hardware. • Pull handle accessory kit available. • Easy access to inside, only 4 screws need to be removed from any of the 6 panels for internal access. • Internal aluminium chassis panel is optional. • Knockdown design ships unassembled for easy handling and shipping protection.