Regulators - Import export

Bester 305C welding machine Lincoln AR/CO2 Regulator/ Flowmeter 30L LE Lincoln Electric LGS3 250 G MIG Torch - Air Cooled - 4M Lincoln Electric 305C It is truly a multi-purpose model, ideal for thin sheet and lightweight applications for medium fabrication work. Powerful and compact, excellent for MIG welding The Powertec 305C was designed around the need to satisfy our customers' demand for robust and robust compact MIG welders. Built as a truly multipurpose model, ideal for both thin sheet metal applications and light to medium construction work. Excellent starting performance. Multi-step voltage knobs for precise adjustment. Excellent drive system with transmission roller Electronic feedback system in the wire drive guarantees a constant wire feed speed. Equipped with large diameter wheels, push/pull bar and lifting eyes for total maneuverability. Meets IEC974-1, ROHS and CE standards for safety and reliability.

Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 150mA 6-SON (2x2) Digi-Key LDO Regulator Pos 3.3V 0.15A 6-Pin WSON EP T/R Arrow LDO Voltage Regulators 150mA 30V Ultra-Low IQ Wide Inpt LDO Reg

The TPS 534 thermopile sensor in TO 5 type housing employs a chip of 1.2 x 1.2 mm2 absorber size and a 30 kV thermistor as temperature reference. The round window opening is equipped with a 5.5 µm longpass (standard) infrared filter. The sensor shows a flat sensitivity characteristics over the wavelength.

This shampoo is mainly for oily hair 99.20% of the ingredients are of natural origin of which 20.02% are organic Say goodbye to oily hair! The Phytema ™ Haircare sebo-regulating shampoo has been developed to fight effectively against the problem of oily or oily hair. The scalp is cleansed and purified after only a few uses and the excess sebum is regulated. Your hair is light, shiny and toned. 250 ml

Pressure regulator of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1 bar: 2050 to 6200 Nl / min Pressure range up to 15 bar

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

Compressor regulator valve, 1/4 inch NPT.

High technology range TurboCure®. The purpose of the Turbocure® solution consists in reducing the curing time by up to 50%. It includes the modules TempInverter® and FillBalancer®. They can be used together or individually depending on the application. This solution respects the integrity of the compound by focusing on improved quality.

Valve + filter regulator + lubricator maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 800 to 3500 Nl / min Pressure range up to 15 bar

Filter+regulator+lubricator maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 1650 to 4500 Nl / min Pressure range up to 15 bar

Compact series lubricators with plastic housing Sizes: 1/4" to 1" Flow rate at 6 bar with ∆p 1 bar: 2600 to 8200 Nl / min Pressure range up to 15 bar

Filter regulator of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 1650 to 4500 Nl / min Pressure range up to 15 bar

Filter+regulator+lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1bar: 280 Nl/min Pressure range up to 15 bar

Filter regulator of the compact series with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 600 Nl/min Pressure range up to 15 bar

Pressure regulator of the compact series, quick exhaust Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

Compressor safety valve, rated at 200 PSI.

OB1000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 320x250x100 mm Weight: 3.5 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB3000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 33 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP44 Functioning/charge: 11÷30 Vdc Maintenance-free piston pump Inorganic solid-type lithium polymer battery. Fluorescent analogue vacuum gauge for checking even in poor visibility conditions, also available with mmHg (millimetre of mercury) scale on request Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user. The OB3000 suction unit is equipped with an internal microprocessor control that allows the storage of device construction and operating data.

Economic injection molding presses. A REP injection unit combined with a closing unit of a Tung Yu press. This combined technology offers openended options Separate extrusion and injection thanks to the "Y" type injection unit. 2 or 3stroke closing unit. Proportional closedloop temperature control. Optimized floor space and ergonomics thanks to its modular design.

Type V410 Core 1,600kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP.

Your reference product ABL8REM24050 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging service or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.

Your reference product ABL8MEM24006 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging service or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.

TECHNICAL FEATURES - Year : 1990 - Internal propeller for punching down and devatting, driven by gear motor - 2 external heat exchangers of about 2 m2 - Drainage grid at the front of the tank DIMENSIONS - Length : 3350 mm - Width : 2000 mm

UPS IMPULSE MASTER MP series is an intelligent device with microprocessor control, builtin voltage regulator, LCD display and modern communication interface. Builtin antijamming, autorestart, cold start functions provide maximum flexibility in device application. The combination of these components makes the UPS MASTER MP series an ideal solution for protecting personal computers, home and office equipment.

Propane regulator to Nf Security With nut Dg175 / b Make The Purchase Of This Bottle Holder for Connecting Your Gas. It Fits In Propane.

The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment

Photoelectric Counter Various Kinds Of Readers Position Detection

Description:The RT2515AGSP is a linear voltage regulator from Richtek USA Inc. It is designed to provide a stable output voltage of up to 3.8V with a maximum current output of 2A. It has an operating temperature range of -40°C to 85°C (TA) and a quiescent current of 1.5 mA. The RT2515AGSP is packaged in an 8-SOIC (0.154" 3.90mm Width) Exposed Pad and is designed for surface mount applications. Features: - Operating temperature range of -40°C to 85°C (TA) - Output voltage of up to 3.8V - Maximum current output of 2A - Quiescent current of 1.5 mA - 8-SOIC (0.154" 3.90mm Width) Exposed Pad package - Designed for surface mount applications Applications: The RT2515AGSP is suitable for a wide range of applications, including power management, battery charging, and voltage regulation. It is ideal for use in portable devices, automotive systems, and industrial applications.