Protective caps - Import export

Maintenance-free high quality link bushings. Sustainable constant use of force during opening and closing. Optimum stability through the conical, U-profile clamping arm. Accessory: 05280 Protective caps 07111 Ball-end thrust screws, stainless steel 07119 Thrust screws, stainless steel 07120 Grub screws with thrust point DIN 6332 07140 Thrust pads DIN 6311 Drawing reference: 1) stop pin position 1 2) stop pin position 2

The UNI lock mounting clamps can be installed in any position on machine tables, fixtures or workholding equipment (tooling plates, cubes, tombstones etc). The modular design enables the number of clamps and distance between them to be ideally adjusted to suit the clamping task. The clamps can be supplied with or without rotation lock. The high clamping forces are generated by the integrated spring package (the unit clamps when depressurised). Compressed air is applied to release the clamp. The following holding forces are possible with the UNI lock clamping bolt in conjunction with M10, M12 or M16 fastening screws: Holding force (M10) 35,000N Holding force (M12) 50,000N Holding force (M16) 75,000N Supplied with: 1x clamping module incl. 6 fastening screws. 6x screw protection caps. 2x air connection O-rings. 1x installation O-ring.

Agricultural equipment covers the production of radial shaft seals, cuffs, 0-rings, shock absorbers, protective caps, springs, fuel hoses and krimers. All products follow the EU norms. The produced articles for agricultural equipment should meet the following requirements: chemical stability in places of installation, deformation resistance when under pressure, breaking strength adapted to pressure, flexibility on low and high temperatures, resistant to attrition. In our production process of articles we use all well known types of elastomers.

For the production and application of industrial goods in car industry we follow the SRPS ISO 9001-2008 ISO norm as well as TRV norm.This understands the specific application during technical production and personal responsability in the use of specific materials for the production of goods used in car industry. We produce air tubes, fuel tubes and oil tubes, shock absorbers, bearers, membranes, floor mats, protection caps resistant to grease and oils... Hemogum can meet car industry customers in production of articles for all renowned car manufacturers. We have the necessary equipment that helps us guarantee high quality, uniformity, excellent physical characteristics and high dimensional precision of our articles. For the production of car industry goods we apply the NR, CR, SBR, NBR, MWQ, FWK

Short version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable without washer. Material: PE Colours: last digits 500 = white without last digits = black Also available in grey RAL 7004 - please send us your enquiry!

Long version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable without washer. Material: PE Colours: last digits 500 = white without last digits = black

Protection against dirt and corrosion. Material: PE Colours: without last digits = black last digit W = white last digits GR = grey Further types on written request.

Short version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Long version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Covering caps for SIT and torx screws. Protect against dirt, damage and unintentional release. Available for countersunk and fillister head screws. Material: LDPE Colours: last digits 500 = white ~RAL 9010 last digits 599 = black ~RAL 9005 last digits 002 = silver-grey ~RAL 7001 Special colours according to RAL possible from 5,000 pcs - please send us your enquiry!

Ideal for booth construction and toolbuilding as well as for the furniture industry. Material: PE Colours: last digits 600 = white last digits 699 = black

Ideal for booth construction and toolbuilding as well as for the furniture industry. P = Pozidriv Material: PE Colours: last digits 600 = white last digits 699 = black

Cap with integrated washer that shortens the mounting time considerably and delivers an aesthetic end product. Applicable for M3, M4 and M5 screws. One dimension for several screw sizes! Material: PP Colours: without last digits = white last digits 699 = black V = for countersunk screws / M = for metric screws

Material: PE Colours: last digits 600 = white last digits 699 = black

Ideal for booth construction, toolbuilding and furniture industry. Please note that diameter A should exceed the bore hole by 0.2 - 0.3 mm. Material: PE Colours: last digits 600 = white last digits 699 = black Further types on written request.

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 69 suitable for DIN 95, 97, 963, 964, 965, 7963, 7972, 7982, 7983, 7991, 7995 ISO 1482, 2009, 2010, 7046, 7047, 7050, 7051, 10642. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 67 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 65 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 7049. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 63 suitable for DIN 95, 97, 963, 964, 965, 966, 7963, 7972, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 7046, 7047, 7050, 7051, 10642. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 61 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 4762, 7049. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 60 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 4762, 7049. Dimension A has to match the dimension A of the snap-on caps.

Caps suitable for hole size 12.0 mm Material: PA Colours: last digits 013 = grey ~RAL7004 last digits 015 = grey ~RAL7035 last digits 021 = white ~RAL9001 last digits 599 = black ~RAL9006 without last digits = white ~RAL9003 Cap type 68 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035

Caps for snap-on rings. These caps are applicable for ring types: 66, 67 and 69. Material: HDPE Colours: last digits 076 = brown ~RAL8019 last digits 027 = brown ~RAL8014 last digits 021 = beige ~RAL9001 last digits 020 = grey ~RAL7038 last digits 018 = grey ~RAL7044 last digits 015 = grey ~RAL7035 last digits 014 = grey ~RAL7001 last digits 013 = grey ~RAL7004 last digits 012 = white ~RAL9016 last digits 011 = white ~RAL9003 without last digits = black ~RAL9005 Cap type 66 suitable for DIN 84, 85, 95, 96, 97, 439, 963, 964, 965, 6912, 7963, 7971, 7972, 7981, 7982, 7983, 7984, 7991, 7995, 7996 ISO 1207, 1481, 1482, 1580, 2009, 2010, 4035, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: HDPE Colours: last digits 011 = white last digits 114 = black last digits 013 = grey ~RAL7004 last digits 021 = beige ~RAL9001 Cap type 65 suitable for DIN 95, 97, 555, 558, 571, 601, 912, 931, 934, 963, 964, 965, 966, 979, 7963, 7972, 7976, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 4014, 4016, 4018, 4032, 4034, 4762, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: PA 6 Colours: last digits 500 = white last digits 599 = black last digits 002 = grey last digits 076 = brown Cap type 64 suitable for DIN 95, 97, 555, 558, 571, 601, 912, 931, 934, 963, 964, 965, 966, 979, 7963, 7972, 7976, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 4014, 4016, 4018, 4032, 4034, 4762, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: PA 6 Colours: last digits 500 = white last digits 599 = black last digits 002 = grey last digits 076 = brown Cap type 62 suitable for DIN 95, 97, 555, 558, 571, 601, 912, 931, 934, 963, 964, 965, 966, 979, 7963, 7972, 7976, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 4014, 4016, 4018, 4032, 4034, 4762, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: LDPE / PA 6 Colours: last digits 500 / 113 = white last digits 599 = black last digits 002 = grey last digits 076 = brown Cap type 61 suitable for DIN 84, 85, 95, 96, 97, 439, 963, 964, 965, 966, 6912, 7963, 7971, 7972, 7981, 7982, 7983, 7984, 7991, 7995, 7996, 7997 ISO 1207, 1481, 1482, 1580, 2009, 2010, 4035, 7046, 7047, 7049, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Protection caps for facade screws (hexagon head screws) with round neoprene slice. Material: PE Colour: black Ø = washer diameter A production according to RAL colour chart or colour sample is possible - please send us your enquiry!

Range of products include: Armlets/ Oversleeves Beard Masks Berner Cytotoxic Protective Gowns Headwear (caps) Protective Cleanroom Gloves (Sterile and Non Sterile) Eye Protection Facemasks Tyvek Lab Coats Protective Footwear Tyvek Protective Suits