Pressure protection - Import export

The mandrel collet is used in small through bores to position and clamp workpieces. Clamping is carried out manually from above using a hex key. The mandrel diameter can be ground to suit the application. The bore for the mandrel should have an H7 tolerance. D min = smallest permissible diameter to which D can be ground. applicable for holes from Ø5 to Ø12.5 mm compact design, small installation space simple handling mounting in any position different installation types possible surface pressure protects the workpiece surface individually adaptable to the diameter Technical data: The tightening torque max. Nm given in the table refers to the spanner size AF2. Assembly: If required, diameter D can be adapted to suit the diameter being held. To do this, expand the mandrel collet ca. 0.2 mm over the required diameter. Grind the OD of the mandrel collet to suit the ID of the workpiece bore.

Operation: The vacuum draws the product from the storage tank into the bottle without any contact between the product and other mechanical components of the machine. Features: • Automatic product level in the bottle with manual adjustment. • Stainless steel base, structure, and nozzles. • Gaskets and other plastic components made from materials certified for food use. • Height adjustment for different bottle sizes with centralized spring. • Vacuum adjustment based on the product type with a pressure gauge. • Filter to protect the pump group. • Borosilicate glass product recovery tank. • Universal product transfer tubes (suitable for wines, beer, oil, spirits, hot fruit juices). • Completely accessible and sanitizable product transfer circuit. • Availability of special nozzles for filling small mignon bottles. Ultrafill-2 Model: from 200 to 400 bottles per hour. Ultrafill-4 Model: from 400 to 600 bottles per hour.

Lincoln P205 lubrication sytem pump 8 Liter 400V Suitable for grease to NLGI 2 Includes pump element K6 with an output of 172 cc/hour. Can be extended to a maximum of 5 pump elements, see related products. Connection pump element 1/4"G Supply voltage 340-420V/50Hz - 440-480V/60Hz Maximum pressure 350 bar Protection class IP55 Temperature -20 to 70°C The advise is to use a pressure relief valve for every pump element. Click here for an overview.

Lincoln P215 Lubrication system pump 30 Liter 400V Suitable for grease to NLGI 2 Includes two pump elements K7 with an output of maximum 47-189 cc/hour. Can be extended to maximum of 15 pumpelements, see related products. Connection pump element 1/4"G Supply voltage 340-420V/50Hz - 440-480V/60Hz Maximum pressure 350 bar Protection class IP55 Temperature -20 to 70°C The advise is to use a pressure relief valve for every pump element. Click here for an overview.

Lincoln P502 Grease pump 1 Liter 24V with Timer Suitable for grease to NLGI 2 Includes pump element k6 with an output of 1.6cc/min. Can be extended to a maximum of 3 pump elements, see related products. Connection pump element 1/4"G Supply voltage 24VDC Maximum pressure 270 bar Protection class IP65 Temperature -25 to 70°C The advise is to use a pressure relief valve with a maximum pressure of 270 bar for every pump element. Click here for an overview..

High performance mechanical exchanger with lateral or rear inlets/outlets (prepared by the manufacturer) Accommodates the pressure gauge inside the exchange knob for pressures up to 15 bar (1500 kPa) Thanks to the special construction, the pressure gauge is protected against accidental mechanical shocks and impacts The pressure gauge fitted inside the exchanger allows the size of the oxygen bar to be reduced 3/8" inlet and outlet connections perfectly compatible with oxygen hoses manufactured by Boscarol Allows a pressure transducer to be fitted on the outlet for measuring the nominal pressure of the kit The exchanger does not include any plate for flush mounting in the ambulance The Boscarol cylinder exchanger is part of the parts that make up the oxygen kit and should be considered as a spare part

High performance mechanical exchanger with lateral or rear inlets/outlets (prepared by the manufacturer) Accommodates the pressure gauge inside the exchange knob for pressures up to 15 bar (1500 kPa) Thanks to the special construction, the pressure gauge is protected against accidental mechanical shocks and impacts The pressure gauge fitted inside the exchanger allows the size of the oxygen bar to be reduced 3/8" inlet and outlet connections perfectly compatible with oxygen hoses manufactured by Boscarol Allows a pressure transducer to be fitted on the outlet for measuring the nominal pressure of the kit The exchanger includes amounting plate for flush mounting in the ambulance. The plate is made of stainless steel and can be painted according to customer requirements The Boscarol cylinder exchanger is part of the oxygen kit and should be considered as a spare part