Power switches - Import export

Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto recovery. Protected against short-circuit, overload and surges. Power on LED indicator. For DIN top hat rail mounting. Technical data: Rating: IP00 Protection class: I Standard: UL508, TUV EN60950-1, CE Connection: screw terminals with contact protection Fastening: installation on DIN rail TS-35/7.5 or 15

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

By measuring torque, the CapStar can ensure the correct level of tension is in place on a wide range of caps and closures such as on medicinal or cosmetics containers, drinks bottles or food jars etc. With the CapStar’s clear display and easy-to-view torque results, operators are able to guarantee production quality whilst ensuring contents – which could be potentially harmful – remain sealed and secured. The CapStar helps to ensure the safety of products, prevent leaks and reduce the ergonomic issues associated with these products without compromising on safety, quality or freshness. For optimal power management, the CapStar automatically switches to the highest voltage power source to save on battery life, yet still giving the option to pick it up and unplug to seamlessly run on battery power. The CapStar is supplied with an adjustable component fixture for measuring bottles and containers, and is available in 2Nm, 4Nm and 6Nm ranges.

KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 4 Pole Switch

KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 5 Pole Switch Start-up protection after thermal cut-out For machines. Special prices for quantities

Product Features: • Ideal for EMI/RFI filtering applications. • Suitable for energy storage inductors for switching power supplies. • High current. • Minimum .5" long leads, for P.C. board mounting. • Storage temperature range: -20°C to 105°C. • Operating temperature range: -20°C to 85°C.

Product Features: • Consists of a double pole power On/Off Switch and is IEC61058-1 compliant. • Available in three standard current ratings of 3A, 6A and 10A. They have good performance for both common mode and differential mode interference with a metal case to provide a good shielding effect.

We bring to your attention a device for remote power control of data center equipment Resilient Power Control Module (RPCM). RPCM combines the functions of remote power management, automatic transfer switch (ATS) without interrupting the operation of connected equipment, short circuit protection and an electricity meter on each output. RPCM has 2 power inputs and 10 pins. The device has no analogues on the market.

This external bypass module is intended for use with UPS FROSTYLE11, 13 kVA. In Normal Mode, the UPS connects to utility power through the bypass module and provides uninterrupted power to the load. In Bypass Mode, the load is switched to power directly from the external network, bypassing the UPS circuits. The UPS input and output are completely isolated from the loads and the mains. In this mode, the UPS can be safely (and without disconnecting the load) removed from the system for maintenance or replacement

Product Features: • Fully encapsulated chokes for use in custom designed suppression circuits. • Typical applications include the suppression of RFI generated by motors and switched mode power supplies etc. All chokes are fully encapsulated and feature single M4 threaded insert fixing. • Available in 10A, 15A and 25 Amps current rating with flying leads connection. • All products are RoHS compliant and approvals held include UL and cUL.

Inverter Drives, PLCs, HMIs, MCG, Relays, Timers, Switches & Isolators, Transformers, Power Supplies, DIN Terminals and Terminals

Nerpa 441B aero boat is a model with a gasoline engine having a capacity of 98 hp. It is designed for 4 people: a driver and 3 passengers. The total load-carrying capacity on water is 350 kg. The sealed housing is made of high-strength aluminum. The bottom is protected by special grade polyethylene sheets. They are firmly bolted. This makes it easy to repair the cover or change it. The deck is designed in such a way that it does not accumulate water. The boat is driven by an aero unit. It consists of an engine, a propeller and a belt. The operation mode is chosen by the customer. It can be a steering wheel or a lever. The control panel contains a tachometer with a service hour meter, a speedometer with a GPS sensor, an engine start button, a power switch, headlight switches, and a sound warning system. Aero boat is able to move on water, ice, snow, swamps, shallow water and land.

Nerpa 241B aero boat is one of the most compact and lightweight models with a gasoline engine having a capacity of 98 hp. It is designed for 2 people: a driver and a passenger. The total load-carrying capacity on water is 350 kg. The sealed housing is made of high-strength aluminum. The bottom is protected by special grade polyethylene sheets. They are firmly bolted. This makes it easy to repair the cover or change it. The deck is designed in such a way that it does not accumulate water. The boat is driven by an aero unit. It consists of an engine, a propeller and a belt. The operation mode is chosen by the customer. It can be a steering wheel or a lever. The control panel contains a tachometer with a service hour meter, a speedometer with a GPS sensor, an engine start button, a power switch, headlight switches, and a sound warning system. Nerpa 241B aero boat is able to move on water, ice, snow, swamps, shallow water and land.

Nerpa 237B aero boat is one of the most compact and lightweight models with a gasoline engine having a capacity of 35 hp. It is designed for 2 people: a driver and a passenger. The total load-carrying capacity on water is 350 kg. The sealed housing is made of high-strength aluminum. The bottom is protected by special grade polyethylene sheets. They are firmly bolted. This makes it easy to repair the cover or change it. The deck is designed in such a way that it does not accumulate water. The boat is driven by an aero unit. It consists of an engine, a propeller and a belt. The operation mode is chosen by the customer. It can be a steering wheel or a lever. The control panel contains a tachometer with a service hour meter, a speedometer with a GPS sensor, an engine start button, a power switch, headlight switches, and a sound warning system. Nerpa 237B aero boat is able to move on water, ice, snow, swamps, shallow water and land.

The IPS511G IR Integrated Circuits (ICs) Power Distribution Switches, Load Drivers are designed to provide a high side switch with a 1:1 ratio of output to input. The device features a non-inverting input type, a voltage load of 5.5 V ~ 35 V, a TO-220AB (5-LEAD) supplier device package, an operating temperature of -40°C ~ 150°C (TJ), a Rds-On-Typ of 110 mOhm, a general purpose switch type, a TO-220-5 package case, and one output. Features: * Non-inverting input type * Voltage load of 5.5 V ~ 35 V * TO-220AB (5-LEAD) supplier device package * Operating temperature of -40°C ~ 150°C (TJ) * Rds-On-Typ of 110 mOhm * General purpose switch type * TO-220-5 package case * One output Applications: The IPS511G IR Integrated Circuits (ICs) Power Distribution Switches, Load Drivers are suitable for a variety of applications, including automotive, industrial, and consumer electronics. They can be used to control power distribution, switch loads, and drive motors.

IC LOAD SWITCH SOT25 Digi-Key DIST Single 5.5V 3A 5-Pin SOT-25 T/R Arrow

The ALLEGRO Power Distribution Switches, Load Drivers UDN2981A are 18-DIP package bipolar output type devices that offers 8 outputs which are configured on 1:1 ratio of the output to the input. This device does not require voltage supply Vcc or Vdd, making it a very efficient device. Its electrical parameters lie within the range of a 5 V to 50 V voltage load.

The TPS1H100AQPWPRQ1 is a high-side power distribution switch and load driver from Texas Instruments. It is designed to provide a high-side switch with a low on-resistance of 0.2Ω and a low quiescent current of 0.5mA. It is suitable for applications such as automotive, industrial, and consumer electronics

The MP5087GG-Z is a high-side load driver designed to provide high-efficiency, high-performance power distribution for general purpose switching applications. This device provides an output voltage range of 0.5 V to 5.5 V with a maximum current output of 7A, making it suitable for use in a wide variety of industries. It has an operating temperature range of -40°C to +125°C and a Rds-On-Typ of 10 mOhm. The switch type is general purpose with one output, packaged in a 12-QFN (2x2) and is powered by a voltage supply of 3 V to 5.5 V. Features: - High-efficiency, high-performance power distribution for general purpose switching - 0.5 V to 5.5 V output voltage range with 7A maximum current output - Operating temperature range of -40°C to +125°C - Rds-On-Typ of 10 mOhm - General purpose switch type with one output - 12-QFN (2x2) package - 3 V to 5.5 V voltage supply Applications: The MP5087GG-Z is suitable for a variety of industrial applications

The VNQ5050KTR-E is a high side power distribution switch and load driver integrated circuit (IC) from STMicroelectronics. It has an operating temperature range of -40°C to 150°C (TJ) and is packaged in a 24-SOP (0.295", 7.50mm Width) Exposed Pad SMD/SMT package. It has a minimum supply voltage of 4.5V and a non-inverting configuration. The turn-on delay time is 15000 ns and the ratio of output to input is 1:1. It is available in Digi-ReelR Alternate Packaging.

The TPS22965DSGR is a 6A load discharge, slew rate controlled N-Channel 8-WSON (2x2) general purpose power distribution switch with a wide operating temperature range of -40°C to 105°C (TA). It is designed to provide a low-cost, low-power solution for power distribution applications. The device features a low on-resistance of 0.3Ω and a low quiescent current of 0.2μA. The device also features a slew rate control function that allows for a smooth transition between on and off states. Features: • 6A load discharge • Slew rate controlled • Wide operating temperature range of -40°C to 105°C (TA) • Low on-resistance of 0.3Ω • Low quiescent current of 0.2μA • Slew rate control function for smooth transition between on and off states • N-Channel 8-WSON (2x2) general purpose • 2.5 V ~ 5.7 V operating voltage Applications: The TPS22965DSGR is suitable for a wide range of power distribution applications, including automotive, industrial, and consumer electronics.

The Allegro A2982SLWTR-T is a power distribution switch and load driver designed to provide a high-current, low-voltage, low-side switch for a wide range of applications. It is a bipolar 20-SOIC W package with a 500mA current rating and a temperature range of -20°C to 85°C (TA)

The ZETEX BSP75GTA is a N-Channel INTELLIFET® SOT-223 General Purpose Power Distribution Switch and Load Driver with a maximum voltage of 60V. It features a 1.6A Auto Restart and an operating temperature range of -40°C to 150°C (TJ).

The LT®8610 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5µA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. Low ripple Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability

The MAX1630A–MAX1635A are buck-topology, step down, switch-mode, power-supply controllers that gener ate logic-supply voltages in battery-powered systems. These high-performance, dual-/triple-output devices include on-board power-up sequencing, power-good signaling with delay, digital soft-start, secondary winding control, low-dropout circuitry, internal frequency-compensation networks, and automatic bootstrapping

This device is a dual center tap Schottky rectifier suited for switch mode power supply and high frequency DC to DC converters. Packaged in D2PAK, this device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. Features ■ Very small conduction losses ■ Negligible switching losses ■ Extremely fast switching ■ Low thermal resistance ■ Avalanche rated ■ AEC-Q101 qualified

Our Industrial Interchangeable Power Suppliers have: - Universal Input 100-240V AC - Constant Voltage, current limited - Low standby power - High efficiency - Continuous short circuit proof - Been independently safety tested Since the invention of the 1st interchangeable unit in 1971, FRIWO has been a byword for innovative and reliable PSU´s. The current series extends from 3 to 150 watts and from 3 to 48 V DC, so whether plugtop or desktop, Haredata Electronics and FRIWO have the solution to meet your requirements. All FRIWO products are independently certified for use in Europe and the USA - including UL approved output leads - and many carry additional approvals as standard. FRIWO offer their expertise and support to obtain approval for any market in the world through the CB scheme, including use of their own EMC chamber at the factory in Ostbevern.

Haredata Electronics are pleased to be able to provide the FRIWO range of fully medically compliant power supplies. For all medical equipment, safety and compliance to global standards is important. All FRIWO FOX medical supplies are fully approved to IEC60601 4th edition, indeed all our units of 50W and below fulfil MOPP and have a leakage current of under 10 microamps.

Flat led backlight system with border illumination for transmitted light- and contour applications for machine vision systems. At nearly all of our back lightings we are working with border illumination. The LEDs are not situated in the lighting area itwelf but below the unlighted edge. The light of the LEDs will be injected into the border of a flat light conductor and uncoupled equally via a calculated dot matrix system. This technique comes originally from the premises of planistar. The dot matric course are sitll being calculated from us an manufactured ba very precise UV print machines. So the square light has an very diffus and even light on the measuring surface. We can produce from very small led lights to very big monster lights every size you need for your vision light system. The high-power led backlights are with switch input for steady or flashing. The controller for the current are always inside.