Pots - Import export

Housing, steel. Magnetic core AlNiCo. Hard magnet in aluminium housing and steel jacket. Shielded system. Pot magnets are used for retaining, lifting and mounting in fixtures. Due to the painted surface, the diameter D can be up to +0.8 mm.

Housing, steel. Magnetic core hard ferrite. Shallow pot magnets, shielded system. Hairline cracks in the magnetic material are unavoidable for technical reasons in D=80, D=100 and D=125 versions. They do not impair the attracting function of the magnets in any way.

Housing, steel. Magnetic core NdFeB (neodym). Protective rubber jacket, synthetic rubber. Housing, electro zincplated. Black protective rubber jacket. Shallow pot magnets with tapped pin, shielded system. With rubber protective jacket for protecting sensitive surfaces. The coefficient of friction is increased by the rubber jacket so that high lateral friction is achieved. magnetic face 2) magnet 3) rubber

Housing brass. Magnetic core NdFeB (neodymium). Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iron, loss of attractive force due to magnetic short circuits occurs. Diameter “D” ground to an h6 tolerance. These magnets can be shortened by the dimensions “H1” and “H2”. The magnets can be mounted by pressfit, screwingin or gluing.

The versatility of this large Zepter Masterpiece Cookware pot knows no end. It is perfect for preparing poultry, meat, rice, pasta, soups, vegetables, curries, seafood, potatoes, and much more in large quantities. However, it is also very popular for preparing tomato juices, jams and fruit preserves. The combination of Zepter Superior metal 316 L, Accuthermal Compact Bottom and Zepter lid and pot edge are at the heart of healthy preparation of food in its own juices at low temperatures. Presentation QUALITY MATERIALS + HEALTHY COOKING SYSTEM = LONGER LIFE Nobody should have to put their life at risk by preparing and eating worthless, toxic and carcinogenic food because of using bad quality pots, pans and substandard cooking systems. The only solution is Zepter’s Masterpiece Cookware. Prepare healthy food, enjoy a healthy diet and live a longer and more productive life.

The Zepter Masterpiece Cookware is a patented system enabling proper and everlasting preparation of healthy food, for a better and longer life. The combination of the Zepter system’s multifunctional elements enables proper preparation, cooking, frying, serving and preservation of healthy food. The Zepter Multisystem is manufactured in Milan, Italy, at one of Zepter’s seven factories in Europe, pursuing the highest quality and safety standards. Zepter’s unique combination of superior metal 316L, cutting-edge Zepter technology and magnificent Zepter design allows you to cook without adding water and to fry without adding fats, thus preserving the food’s nutrients. With the Zepter Multisystem, food is cooked in its own juice, sufficient to preserve its essential nutrients and organoleptic properties. The Zepter Masterpiece system for preparing healthy food is fast, easy and always healthy. Presentation QUALITY MATERIALS + HEALTHY COOKING

Venti machines work with a vacuumbox where all cuttings are collected undamaged. From 30 cm up to 200 cm wide for tables. Completely made of aluminium and galvanized steel.

Zinc plated and lacquered flower box with separator

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade, 5 Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 2 Watt (+/- 1.5 db, 300Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency rating. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 500 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 150 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), Pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies (except 107X). • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 200V. • Referring to figures 1-9, if connection is not used - no pin will exist.

Product Features: • Pin type, miniature size, P.C. board mount, net weight of only 0.1 oz. • Rugged potted construction produces a completely sealed unit withstanding severe environmental conditions. • Secondary may be used as primary and primary as secondary. • Power level: Minimum frequency range: 300 Hz. to 100 Khz. +/- 0.5 db @ 100 mw. • Frequency range @ +10 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +15 dbm is 200 Hz. to 100 Khz. +/- 0.5 db • Frequency range @ +20 dbm is 300 Hz. to 100 Khz. +/- 0.5 db • Frequency measurements with no D.C. current saturation 101D

Product Features: • One piece moulded construction - no lid. Designed for potting box applications. • Moulded from black general purpose ABS plastic with a flame rating of UL94-HB. • Temperature rated -20°C to +94°C. • 1.0mm (0.04") wall thickness except for 1596B103 (0.8mm).

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 100V. • Referring to figures 1-9, if connection is not used - no pin will exist. 101D

The set contains: 1 Casserole with glass lid: 24 x 13.5 cm 6.1L 1 Casserole with glass lid: 20 x 11.5 cm 3.6L 1 Casserole with glass lid: 18 x 10.5 cm 2.6L 1 Casserole with glass lid: 16 x 9.5 cm 1,9L 1 Saucepan with glass lid: 16 x 9.5 cm 1.9L 1 Frying pan with glass lid: 24 x 6.5 cm 1 Frying basket with removable handle 1 Set kitchen utensils - 7 pieces 3 Metallic containers for spices and 1 magnetic base 2 Bakelite mats Characteristics: Construction Material: Stainless steel Heat resistant handles High strength glass lids with steam hole Uniform heat distribution 35% lower energy consumption Compatible with all stove tops 5 layers induction bottom With liquid measuring scale Weight 8.600 Kg Inox color Easy to wash in the dishwasher

Pressed peat moss tablets Ø 32 mm is manufactured for growing seedlings of various flowery and decorative cultures under domestic conditions, on plots of land attached to a house, in the open and protected soil. Tablet features: Pressed peat moss tablets Ø 32 mm are produced from high-moor milled peat dried to 27-29% moisture and pressed into the round form for pots with a volume 0.3 liter. Content of nutritious elements (mg/100g of dry substance): Nitrogen (ammonia and nitrate) 100 - 120 mg Phosphorus 150 – 200 mg Potassium 150 – 200 Trace substances: Cu, B, Mn, Mo, Zn, Fe Electroconductivity 0.5 – 1.1 mS/cm Tablet dimensions: 0.3 L – Ø 32 mm, height 7-9 mm, weight 7-8 g.