Plug connectors - Import export

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

Cable and housing PUR Contacts gold-plated bronze. Version: Bush (female) Voltage: U max. 60 V Current: I max. 4 A Terminals: 3-pin Security type: IP 67 Note: Plug connector with screw fitting. Plug encapsulated to cable.

Housing, plastic Contacts M8x1 gold-plated bronze. Contacts M12x1 Optaloy-coated brass. Version: Bush (female) Voltage: U max. 60 V Current: I max. 4 A Terminals: 3-pin (4-pin by M12x1) Security type: IP 67 Note: Plug connector for self-assembly with screw lock.

Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°

Merefields Supply a very wide range of HIRSCHMANN PARTS, please send email to liamm@merefields.com for a Quote. We have over 10 Million Lines of Components in our Supply!

OB1000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 320x250x100 mm Weight: 3.5 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB1000 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 850 mbar (85 kPa) ±10% Nominal suction flow: 25 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 320x250x100 mm Weight: 3.5 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB2012 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and two-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 350x240x120 mm Weight: 4.6 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB2012 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and two-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP34d Functioning/charge: 12÷15 Vdc Maintenance-free piston pump Sealed lead-acid battery The suction unit can be equipped with an OB WB charging bracket (in accordance with EN 1789) and an external mains-voltage power supply with two-pole plug (mains power supply between 100 and 240 Vac) Dimensions: 350x240x120 mm Weight: 4.6 kg complete with accessories, without support bracket Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

OB3000 medical suction unit equipped with: OB-J collection jar for 1000 ml SERRES® disposable bags recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 33 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP44 Functioning/charge: 11÷30 Vdc Maintenance-free piston pump Inorganic solid-type lithium polymer battery. Fluorescent analogue vacuum gauge for checking even in poor visibility conditions, also available with mmHg (millimetre of mercury) scale on request Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user. The OB3000 suction unit is equipped with an internal microprocessor control that allows the storage of device construction and operating data.

OB3000 medical suction unit equipped with: autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles recharging cable complete with cigarette lighter plug and 2-pole connector Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 33 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP44 Functioning/charge: 11÷30 Vdc Maintenance-free piston pump Inorganic solid-type lithium polymer battery. Fluorescent analogue vacuum gauge for checking even in poor visibility conditions, also available with mmHg (millimetre of mercury) scale on request Possibility of viewing the battery charge status without having to switch on the device. The battery can be removed and replaced by the user.

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Available with silver or gold contacts, die cast nickel, black or plastic shells and including non-latching versions • Suitable applications include: • Sound and video mixers • Microphones • Studio equipment (Amplifiers, Professional CD players, Mixing desks, etc) • Active loudspeakers • Industrial applications like control circuits • There is also a universal range of connectors which are available in non-latching versions for users who prefer the slightly faster disconnection that this type of connector allows.

• Available with silver or gold contacts, die cast nickel, black or plastic shells and including non-latching versions • Suitable applications include: • Sound and video mixers • Microphones • Studio equipment (Amplifiers, Professional CD players, Mixing desks, etc) • Active loudspeakers • Industrial applications like control circuits • There is also a universal range of connectors which are available in non-latching versions for users who prefer the slightly faster disconnection that this type of connector allows.

• Available with silver or gold contacts, die cast nickel, black or plastic shells and including non-latching versions • Suitable applications include: • Sound and video mixers • Microphones • Studio equipment (Amplifiers, Professional CD players, Mixing desks, etc) • Active loudspeakers • Industrial applications like control circuits • There is also a universal range of connectors which are available in non-latching versions for users who prefer the slightly faster disconnection that this type of connector allows.

IDC & Standard Connectors, Flat Blade Connectors/ D-Sub Connectors, IP66/68 Connectors, USB/Ethernet/Coaxial Connectors Since 1964 the innovative family business Ettinger GmbH has been your dependable partner for electronic and mechanical components. Customers benefit from our wide one-stop product range, excellent stock availability and reliable delivery. Our range covers everything from spacers to switches in many designs. We have more than 28,000 products available from stock. Nationally and internationally many manufacturers have classed us as an A-supplier of the category C parts they require daily. Long-standing collaboration with leading manufacturers guarantees consistently high product quality which is also constantly controlled by our quality assurance system, certified in accordance with DIN EN ISO 9001:2008.