Overload protection - Import export

THE STABILIZER IMPULSE PSN3200 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in downtime for critical consumers for a wide range of applications. IMPULSE PSN3200 can be used not only on production lines, but also to protect equipment in cottages or offices.

Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto recovery. Protected against short-circuit, overload and surges. Power on LED indicator. For DIN top hat rail mounting. Technical data: Rating: IP00 Protection class: I Standard: UL508, TUV EN60950-1, CE Connection: screw terminals with contact protection Fastening: installation on DIN rail TS-35/7.5 or 15

High precision Torque Gauge Suitable for fine torque measurements required in inspection, research and assembly of small parts, such as precision instruments, electronic products. Graduation and memory pointer on the body side ensure excellent visibility from different operating positions. There are various application types, e.g. for measuring rotating objects, or also for measuring torque on orthodontic springs, et al. BTG models have a three-jaw chuck which firmly grasp the object. Main body and chuck are locked when pushing “push lock button”. Push lock button makes body and chuck secured while using chuck. Key Features: - Accuracy ± 2% - Bi-directional torque indication – cw / ccw - Dial scaled 270 degrees each direction, built-in overload protection - Models with -S suffix have additional memory pointer in top display - Equipped with 3-jaw steel chuck.

High precision Torque Gauge Suitable for fine torque measurements required in inspection, research and assembly of small parts, such as precision instruments, electronic products. There are various application types, e.g. for measuring rotating objects, also for measuring torque on orthodontic springs et al. Graduation and side memory pointer (except ATG045CN) are on the body. This ensures excellent visibility in different operating positions. ATG models have a three-jaw chuck which firmly grasp the object. Main body and chuck are locked when pushing “push lock button”. Push lock button makes body and chuck secured while using chuck. Key Features - Accuracy ± 2% - Bi-directional measurement – cw / ccw - Dial scaled 270 degrees each direction, built-in overload protection - Side scale ensures excellent visibility - Models with -S suffix have additional memory pointer in top display - Aluminium cover and steel cuck (#321) as standard.

Hawo® HP 630 WS Professional L Sealer Machine. The Hawo® HP 630 WS is a robust, industrial heat sealer built for efficient and reliable packaging.Designed for diverse industries, this machine excels in demanding sealing applications.Its advanced L-shaped sealing jaw delivers precise, uniform seals on a single pass, boosting productivity.Crafted from durable materials, it handles various films, laminates, and foils with customisable sealing width (10-30mm) for tailored performance. The intuitive control panel simplifies operation with clear displays and adjustable settings.Pre-programmed profiles streamline setup for common materials.Built for longevity, the machine features safety guards, automatic shut-off, and thermal overload protection.

Discover the Hawo® HPL 500 D-V & 3000 DC-V Rotary Heat Sealer - the pinnacle of flexible packaging sealing. Crafted by Hawo experts, this versatile machine excels in sealing a vast array of materials, from laminated films to foils.Ideal for businesses demanding reliable, efficient, and high-quality seals, this rotary heat sealer delivers exceptional performance and durability.Featuring dual-voltage compatibility (110V/230V), it's globally adaptable. Its rotary design ensures consistent, high-speed sealing for professional-looking packages.Precision temperature and speed controls optimise sealing for diverse materials, while robust construction guarantees longevity.Safety is paramount with thermal cut-off and overload protection. The machine's ergonomic design and user-friendly interface enhance operator comfort and safety.

These digital dynamometers are precise (0.1%) and lightweight (aluminum). Their lightness will make your task easier if you are performing Periodic Checks of lifting devices or tugboat pulling force controls. They are available in 2 versions: with an integrated display. Without display, the weight being shown on a 2.4 GHz radio remote control equipped with a 6-digit display. The radio range is 1000 m (on the front side of the dynamometer). The same remote control can be paired with 4 dynamometers simultaneously and display individual values or the sum of the 4 loads. Functions: Units: kg, t, lb, kN; tare; peak They are equipped with an audible warning to alert in case of overload. Protection rating: IP65 with integrated display IP67 without display - Associated remote control IP65 Power supply: Model with display: 1 x 9V PP3 battery Model without display: 4 x LR6 AA batteries in dynamometer (2 x LR6 AA batteries for the remote control)

The Russian-manufactured inverter machine ТОРУС-320 is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The metal housing is equipped with large ventilation holes in order to prevent overheating of internal components. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of ТОРУС-320 devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 320A (100% at 300A). The welding inverter machine can be used at low temperatures and reduced supply voltage.

The inverter machine VIKING 500A PRO is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of VIKING 500A PRO devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 500А (100% at 420 A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Adjustable functions of hot start and arc reheat imply the ability to adjust the operation of the device with minimal spattering and allow you to perform work in any spatial position of the electrode and welded surfaces.

With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads).

Very small installation depth: < 20 mm Without claws. With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. With manually adjustable operating mode: trailing / leading edge control. With adjustable minimum/maximum brightness. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (leading edge control) Nominal power: 2 - 400 W/VA (trailing edge control)

220v 9v power adapter 2a 18w pss6e0920 compatible 1a 1.2a 1.5a 1.6a 1.7a 1.8a 1.9a Characteristics compact design high efficiency very low consumption at zero load protections: short circuit / overload / over voltage / over temperature for IT equipment only

220v 9v power adapter 2a 18w pss6e0920 compatible 1a 1.2a 1.5a 1.6a 1.7a 1.8a 1.9a Characteristics compact design high efficiency very low consumption at zero load protections: short circuit / overload / over voltage / over temperature for IT equipment only

1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers These Intersil RS-485/RS-422 devices are “fractional” unit load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for 10% tolerance supplies (4.5V to 5.5V). • Fractional Unit Load Allows up to 256 Devices on the Bus • Specified for 10% Tolerance Supplies • -7V to +12V Common Mode Input Voltage Range • Three State Rx and Tx Outputs • 30ns Propagation Delays, 5ns Skew (ISL81487) • Half Duplex Pinouts • Operate from a Single +5V Supply (10% Tolerance) • Current Limiting and Thermal Shutdown for Driver Overload Protection • Drop-In Replacements for: MAX487 (ISL8487); MAX1483 (ISL81483); MAX1487, LMS1487 (ISL81487) • Pb-Free Plus Anneal Available (RoHS Compliant)

1.5 A, Adjustable Output, Negative Voltage Regulator The LM337 is an adjustable 3−terminal negative voltage regulator capable of supplying in excess of 1.5 A over an output voltage range of −1.2 V to − 37 V. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blow−out proof. The LM337 serves a wide variety of applications including local, on card regulation. This device can also be used to make a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the LM337 can be used as a precision current regulator. Features •Output Current in Excess of 1.5 A •Output Adjustable between −1.2 V and −37 V •Internal Thermal Overload Protection •Internal Short Circuit Current Limiting Constant with Temperature •Output Transistor Safe−Area Compensation

The cable- and tube rewinder is a desktop device and serves as rewinder from cables and tubes to an outside diameter of 18 mm. For variable adjustable thorns possible make a rolling up of tubes and cablerings with an inside diameter of 140 - 400 mm. The equipment is served by a foot pedal and had a speed governor. The electronic control has a resetable overload protection, as well as an emergency stop switch. The direction of rotation can be switched to left or to right.