O-rings - Import export

Orings are universal sealing elements used to seal against liquid or gaseous median. They are suitable for static and minor dynamic applications. Orings can be used for radial and axial sealing. The sealing occurs during installation by the radial or axial compression of the crosssection. During operation, the median pressure increases the deformation of the Oring and so increases the sealing effectiveness. For best sealing effectiveness, the Oring should have the largest possible crosssection. During installation the correct groove size, compaction, elongation/compression should be ensured. By static use the compaction should be 15 30% of the crosssection. By dynamic use it should be 10 18% (hydraulic), 4 12% (pneumatic). With regard to the ID, when installed the Oring should be stretched max 6% compressed max 3%

Self-aligning pads are used to support and clamp unmachined and machined workpieces. They also serve as stops, supports and thrust pads in fixtures and toolmaking. Ball secured against rotation. Form O: The abrasive diamond surface is bonded firmly to the ball. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads. Advantages: The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement.

Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. Form K white. Form E hardened, bright. Form O diamond impregnated surface comparable to 100 grade abrasive grit. Form P polyurethane surface, hardness 60 Shore. Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. In addition, they serve as stops, supports and thrust pads in fixtures and toolmaking. The ball can be removed from the housing by applying light pressure to the socket head screw. Ball secured against rotation. Advantages: Highly cost-effective as inserts can be exchanged. The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement. Drawing reference: Form C: flattened steel insert, smooth Form E: flattened stainless steel insert, smooth Form F: gripper face Form K: flattened POM insert, smooth

Turned parts with mechanical finishing. Ground, hardened, welded, soldered. Pre-assembled with sealing elements and O-rings.

The mini cylinders of the CH series are cylinders with extremely reduced dimensions. For space-saving screwing, also with O-ring seals, in shaped holes or for panel mounting.

O RING/CONVERTER

Graco repair kit 24B768 for air valve Husky 1050A 1 x (202) PISTON 1 203 DETENT PISTON ASSEMBLY 1 x (204) CAM, detent 1 x (205) PLATE, air valve 2 x (206) O-RING 2 x (208) U-CUP 2 x (209) SCREW Kit 1 x (211) DETENT SPRING 1 x (212) BASE, cup 1 x (213) CUP 1 214 O-RING, cup 1 x (219) O-RING 1 x (108) GASKET, air valve 1 x GREASE, lithium-based

O-Rings are the most widely used seals because they are efficient and economical and can be used in a wide variety of static and dynamic applications. O-Rings can be used to seal practically all liquid and gaseous media and they are available in elastomeric and other materials including EPDM, FKM and NBR, among others.

The double acting Turcon® Glyd Ring® is a combination of a Turcon® based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring is energised by the fluid, pushing the Turcon® Glyd Ring® against the sealing face with increased force.

Double Delta® combines the flexibility and response of O-Rings with the wear and friction characteristics of the Turcon® materials in. The double acting performance of the seal follows from the symmetrical cross section which allow the seal to respond to pressure in both directions. Initial contact pressure is provided by radial compression of the O-Ring. When the system pressure is increased the O-Ring transforms this into additional contact pressure, the contact pressure of the seal is thereby automatically adjusted so sealing is ensured under all service conditions.

Double-acting O-Ring energized scraper with two O-Rings that has two functions: a) to scrape contaminants from the retracting piston rod to prevent soiling of the system and b) to hold back the residual oil film on the extending piston rod on the medium side. Excluder F is recommended for use in conjunction with Turcon® Stepseal® 2K or Zurcon® Rimseal. Very high resistance to hydraulic media.

The Turcon® Excluder® 2 is a double-acting O-Ring energized scraper that has two functions: a) to scrape contaminants from the retracting piston rod to prevent soiling of the system and b) to hold back the residual oil film on the extending piston rod on the medium side. The O-Ring maintains the pressure while the Excluder® 2 performs the scraper function. Excellent sliding properties and stick-slip free.