Mould production - Import export

Plastic crate Plastic crate produced with injection moulding technology – primarily intended for use: In households. In food industry – for pastries, fruits and vegetables. Processed materials PP HDPE PP (polypropylene) is the second most frequently used material in Europe. Its share in consumption of plastic materials ranges about 20 %. Polypropylene is By its features and use, polypropylene is similar to polyethylene, therefore both of these polymers are classified in the same group indicated as polyolefins. Unlike PE, PP however features higher strength and consistency, and since its melting temperature is higher, it shows good temperature stability. PP consistency imparts good dimensional stability to products. Polypropylene can be found almost anywhere: in packaging materials, household appliances, clothing, means of transport, and many other products. More than half of the world PP production is used for packages. It is also used in technical applications. It is used...

Floor tiles Multifunctional plastic tiles with TERRASOL click-system, used in both, the exterior and interior, manufactured using the injection moulding technology Floor tiles were developed in collaboration with the Swiss company Siltex. Product advantages Click System – easy to install, easy to manipulation. Lining with fillets possibility. Easy-care. Coloured variants. UV-stabilized. Temperature resistant, no deformation under heat/cold exposure. Water drainage. Resistent to most chemicals. Processed materials PP PP (polypropylene) is the second most frequently used material in Europe. Its share in consumption of plastic materials ranges about 20 %. Polypropylene is By its features and use, polypropylene is similar to polyethylene, therefore both of these polymers are classified in the same group indicated as polyolefins. Unlike PE, PP however features higher strength and consistency, and since its melting temperature is higher, it shows good temperature stability. PP...

Injection, injected products (from PP, LDPE, HDPE, etc. materials) – we offer the production on injection moulding machines with the clamp force of 420 – 800 t, moulded piece weight 80 – 3000 g. Our production assortment of injection-moulded products includes e.g. boxes, lids, tiles, protective plastic sides, or plastic containers. We offer the option of injection mould production including product development. Using your own moulds, any products according to specified parameters can be manufactured.

Designed for the manufacture of highvoltage insulators (550 kV), this press is one of the largest presses made by REP. The dimensions of the parts to be injected explain the huge size of the press 660 mm in diameter, 2,600 mm long, moulded in one go. The production of a complete insulator is therefore performed in one or two cycles, thus significantly increasing the profitability and reliability of the parts. Machine features Closing force 24,000 kN Size of the platens 1,500 x 3,000 mm Injection volume 25,000 cm³ x 2 (2 injection units)

Machine features Clamping force 1,950 kN. Size of the platens 450 x 450 mm. Injection volume 1,000 cm³. The H49 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. An optimized cycle time. etc

NOVOPLAST – plasticized PVC The title NOVOPLAST ® indicates plasticized PVC granulates. It is a mixture of various additives combined suitably according to its further use. The most important additives to plasticized mixtures may in addition to PVC and plasticizers include thermal stabilisers, lubricants, separation agents, filling agents, pigments, flame retardants, light stabilisers, antioxidants, various modifiers, etc. The content of plasticizer in the mixture is determined by final hardness of the mixture. Hardness of resulting mixtures ranges from 45 degrees on the Shore A scale to the hardest Novoplast – 60 degrees on the Shore D scale. Novoplast granulates are processed subsequently using mainly extrusion, injection moulding, and mould pressing technologies. Final products manufactured from plasticized NOVOPLAST® granulates are various types of hoses, hoses with special resistance against gasoline, diesel, oil, frost, etc., technical mouldings, floor covers, outsoles,...

Machine features Clamping force 3,100 kN. Size of the platens 550 x 550 mm. Injection volume 1,000 cm³ or 2,000 cm³. The H59 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. Optimized cycle time. etc.

Machine features Clamping force 4,000 kN. Platen size 750 x 800 x 80 mm. Injection volume 2,000 cm³ or 5,000 cm³. The H610 allows Automated productions. Injection molding (more or less simple parts). A small footprint and height. An optimized cycle time. etc.

The TYC2RT compression press allows the production of rubber mouldings with compression moulding or vacuum compression. The twoplate in/out with 45° inclination of the upper plate is suitable for various options. They are particularly suitable for moulding Orings, pharmaceutical stoppers, syringe plungers, and many other rubber parts. They are available in 2RT or 3RT series depending on the number of plates in the mould. Equipped with a 4post clamping system with high precision parallelism, their adjustable opening stroke allows different mould heights. The vacuum bell system reduces the curing time, thus increasing productivity.

We can supply EPS-EPP shape moulding machines, suitable for various applications, product types and mould sizes. While our traditional range of machines is of hydraulic types, we can also supply electrical shape molding machines as well. You can learn more about our products and services by visiting our web site - https://www.estechtic.net/ or you can send your inquiries to fr@estechtic.net.

Product Features: • Moulded powdered iron core. • All chokes include vinyl insulation cover. • 1.25" long leads (+/- 0.1"). • High inductance and high current. • L measured at 7.9 Mhz. on 1536D, E and F all others at 1 Khz.

Product Features: • Moulded from a black, glass reinforced polyester. Smooth finish. • Includes Gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North American Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Enclosures have an impact rating of IK09 in conforming with IEC 62208 and IEC 62262. • Lid contains self captivated stainless steel screws. • Gasket is silicone. Heat resistance 100°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

Product Features: • Moulded from a grey, glass reinforced polyester. Smooth finish. • Includes gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North America Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Impact rating of IK08 per IEC62262. • Lid contains self captivated stainless steel screws. • Gasket material is Mohogumi rubber (EDPM). Heat resistance 100-120°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models are adaptable to a wide selection of Arduino's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Arduino boards are not included.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models available for Beaglebone White, Black and Green. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Beaglebone boards are not included.

Product Features: • Moulded in a general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Enclosure is secured with self tapping screws. • Includes four (4) self adhesive rubber feet and instruction sheet. • Boards are not included.

Product Features: • Moulded in a choice of general purpose ABS plastic with a satin texture. • Enclosure designed to allow access to I/O connectors and often used controls and/or Led's. • Models feature either dual camera mounts (inside or outside) OR a touch screen mount. • Enclosure top and bottom halves snap together. • Includes four (4) self adhesive rubber feet and instruction sheet. • Development boards, cameras, and touch screens are NOT included.

In Mould Labeling is a decoration method where the packaging and the label merge together during the injection moulding process. This way, illustrations and information can be applied to plastic packaging. The result is a decoration with outstanding picture quality which is inseparable from the packaging. IML is the solution to make your products stand out !

Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.