Results for
Spain
Magnet with notepad in a fun Christmas design of Santa Claus and Reindeer. Includes 40 plain sheets and natural wood pencil. 40 Sheets Notepad. Pencil Included
Request for a quoteTurkey
Permanent Magnetic Lifters are mainly used to lift steel plates, blocks, press moulds etc. and load / unload in machines during handling operation.They are easy to operation and safe to handle and hence are widely used as lifting devices in factories, warehouses and transportation industries. Please contact us for more information.
Request for a quoteFrance
Housing plastic. Magnetic core hard ferrite. Note These magnets are often used on notice boards, whiteboards and magnetic boards. Drawing reference 1) Magnetic face 2) Magnet 3) Housing
Request for a quoteFrance
Housing, steel. Magnetic core NdFeB (neodym). Protective rubber jacket, synthetic rubber. Housing, electro zincplated. Black protective rubber jacket. Shallow pot magnets with tapped pin, shielded system. With rubber protective jacket for protecting sensitive surfaces. The coefficient of friction is increased by the rubber jacket so that high lateral friction is achieved. magnetic face 2) magnet 3) rubber
Request for a quoteFrance
Ball, aluminium. Magnet, neodymium. Body, steel. Holding ring, steel lined with leather. Version Anodised. Holding ring chemically nickelplated. Note The magnetic clamping balls are used to gently hold components in the optimum working position during e.g. polishing, assembling and laser welding. Swivel angles of up to 90° can be set, depending on the workpiece geometry and weight. The magnetic ball can be turned on and off using the Tgrip hex key provided.
Request for a quoteFrance
Housing, steel. Magnetic core AlNiCo. Hard magnet in aluminium housing and steel jacket. Shielded system. Pot magnets are used for retaining, lifting and mounting in fixtures. Due to the painted surface, the diameter D can be up to +0.8 mm.
Request for a quoteFrance
Housing brass. Magnetic core NdFeB (neodymium). Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iron, loss of attractive force due to magnetic short circuits occurs. Diameter “D” ground to an h6 tolerance. These magnets can be shortened by the dimensions “H1” and “H2”. The magnets can be mounted by pressfit, screwingin or gluing.
Request for a quoteFrance
Housing, steel. Magnetic core hard ferrite. Shallow pot magnets, shielded system. Hairline cracks in the magnetic material are unavoidable for technical reasons in D=80, D=100 and D=125 versions. They do not impair the attracting function of the magnets in any way.
Request for a quoteFrance
The workholding magnets 090602010 to 090602030 consist of a permanent magnetic system with fine pole divisions (4 mm) which are effective on two or three faces. To clamp extremely thin steel parts we recommend the magnet 090602040 with the finest pole division of 1.3 mm. The magnetic lifespan of the workholding magnets under conditions prevailant in industrial machining is unlimited. Approximately half the height of the workholding magnets can be ground down or polished away with no significant impairment of the magnetic strength.
Request for a quoteFrance
Unshielded system. The magnets can be mounted by pressfit or gluing. 1) magnetic face
Request for a quoteFrance
Black. Pan head screw and retaining plate electro zinc-plated. Note: Magnetic catch for swing and sliding doors. The elongated holes enable flexible positioning on aluminium profiles and panel elements. Drawing reference: 1) Pan head screw 2) Retaining plate
Request for a quoteGermany
The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteGermany
The CZ series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with weight-optimized lightweight profile tube including practical slot for position sensors.
Request for a quoteGermany
The CY series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with robust and aesthetic profile tube.
Request for a quoteGermany
Diameter 32-63mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteFrance
Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note Simple adhesive mounting; selfassembly possible. Required tape length calculated from measuring path + sensor length "L" + (2 x run or return "B"). L = see drawing of sensor used. B = 10 mm (run and return). Technical data Coefficient of expansion (11 ± 1) x 106/K (spring steel) Temperature range Ambient temperature 20–70°C Storage temperature 40–70°C Assembly Installation using the preaffixed doublesided adhesive tape must be carried out according to the enclosed user information. On request Other lengths from 0.1–100 m, in increments of 0.1 m. Note Relative humidity 100%. Dewing is permissible. Drawing reference 1) Cover band A = 0.176 mm 2) Magnetic tape M = 1.0 mm 3) Carrier band T = 0.3 mm 4) Adhesive tape K = 0.1 mm 5) Required tape length = measuring path + L + 2 x B 6) Measuring path
Request for a quoteFrance
Housing thermoplastic. Version: Operating principle: Magnetic. Rating: IP67. Note: If the actuator is within the switching range (safety door closed), the safety contacts and, if applicable, the signal contacts of the safety switch are activated. The contact is thus closed via a magnet (magnetic field). Form A: Actuator on one level to the safety switch. Form B: Actuator offset by 90° to the safety switch.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
United Kingdom
We offer a Very Wide Range of Brands, please send me enquiry via liamm@merefields.com or enquires@merefields.com
Request for a quotePortugal
KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 4 Pole Switch
Request for a quotePortugal
KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 5 Pole Switch Start-up protection after thermal cut-out For machines. Special prices for quantities
Request for a quoteLuxembourg
Magnetic Couplings specifically for Polyurethanes process. general informations The GMDO is a permanent magnet designed to transmit torque thanks to the magnetic field established between the inner and outer rotor. The use of magnetic couplings is recommended whenever it is necessary to hermetically separated two zones in order to prevent fluid or gas leakage from an area to another. An example application is fluid transfer pumps. In this applications the fluid must not come into contact with the external environment. The magnetic coupling also prevents the transmission of vibrations and axial / radial loads to the drive shaft. . Main benefits: No fluid leakage Maintenance free Reduction of vibrations Possibility to limit a maximum torque Some example applications: Application on low pressure foaming machine Application on MDF wood gluing machine Application on high pressure machine for polyurethane Application on storage plant Application on Mixer Main technical data The...
Request for a quoteLuxembourg
You need to improve your process? remove leaks nose pump? We provide you magnetic coupling kit for your high pressure pump
Request for a quoteFrance
DRILLSTAR fishing magnet is a valuable tool before diamond coring or drilling. Its strong magnetic field will retrieve all types of small steel objects from the bottom of the hole. It is available is a variety of sizes and shapes, to suit the most demanding fishing jobs. Two main designs are available : - Classic design, with a single magnet. - Modular design, using multiple small, high-strength magnets: this design enables a wide range of lifting forces and magnetic surface shapes, using the most powerful magnets available today. Mud ports can be added on the tool bottom or side to clean out the fish. Our magnets are available in two grades, depending on temperature rating : - Normal, up to 300 deg F (150 deg C). - High Temp, up to 570 deg F (300 deg C). Unlike traditional fishing magnets, DRILLSTAR Magnets are permanent and do not require any periodic re-magnetization. High-temp magnets are designed to lose very little force with temperature increase (3% per 100 deg C)
Request for a quoteFrance
Using the pressure and temperature, the stripes are applied to the overlay or the sheet, while the protective film is removed and wound on a support. The machine can be equipped with a guillotine for cutting formats, or (and) a reel for the overlay after removing the piste. The machine can also be equipped with two systems to work on leaves and on roll. Unwinder roll overlays on mandrel Side guides adjustable micrometer Winding device holder with the magnetic track in the event detection cell decasse. Mounting Tape with voltage control, and adjustable positioning guides the rollers. Positioning + or 0.1 mm servo motor 0,75 KW Cleaning system with a double face support roller on the output Storage formats tracked on a table with two anti static set before laguillotine and before the table or rewound Touch screen control friendly, multi lingual (French and / or English), setting and trimming various counts Use of electrical
Request for a quoteUnited Kingdom
Tecnomagnete began its activity in 1974, becoming specialized in permanent-electro magnetic technology applied in the machine tool field. Thanks to original patents, the continous improvement of Quadsystem technology and a winning commercial strategy, Tecnomagnete is the leader for magnetic systems in the industry. Products entail MillTec Grip, for gripping on milling machines, Radial Pole and FlexoMag for gripping on lathes, and the range of MaxX magnetic lifters for lifting ferrous materials.
Request for a quoteUnited Kingdom
Eclipse’s patented magnetic filtration or magnetic separation systems are the ultimate in filtration technology, providing, quality and environmental benefits. The Filtramag is the ultimate in filtration technology, its’ high intensity magnetic cores make it 1005 effective for use with materials which have lower magnetic permeability such as tungsten carbide and cast iron. With a stainless steel construction it is ideal for use in harsh chemical environments and wash systems. Patented design. Easy installation. Unique dual flow technology™ maximises collection capability. Operates at up to 20 bar. Removes both magnetic and non-magnetic contamination. Minimal pressure drop. In-line connections. Ideal for use in harsh chemical environments. The dual chambered design means that fluid is exposed to the high intensity magnets for the maximum time thus ensuring almost 100% of contamination is removed on first pass through the filter. High intensity magnetic cores ensure particle
Request for a quoteUnited Kingdom
High collection capacity relative to size No reduction in pressure or flow Easy clean Rapid return on investment Eclipse Magnetic Filtration produce a range of products to filter ferrous materials from your CNC machine's cutting fluids and oils. Magnetic filtration is a positive contribution to companies' environmental policies and ISO 14001 accreditation. Magnetic filtration requires no consumable or disposable products. It extracts 100% of ferrous contamination, drastically reducing the use of disposable filter media. Eclipse Micromag is a compact magnetic filter for standard machine filtration and smaller wash stations. Micromag is compact in size but has massive holding capacity. Units hold 1kg, 2kg, and 4kg of contamination respectively. Micromag is available in a range of sizes to suit a range of applications up to a pressure of 80 bar and a temperature of 140 degrees. Specific Micromag units are selelcted for an application based on required flow rate
Request for a quoteUnited Kingdom
Keytracker’s Magnetic Block Systems are a simple key storage and vehicle identification solution, ideally suited to vehicle repair outlets, easily identifying the vehicle in a crowded yard or storage area The Block System includes: 1 Magnetic Block Control Board and 20 coloured and numbered Magnetic Blocks
Request for a quoteUnited Kingdom
The Magentic Blocks are available to purchase individually in the colours below.
Request for a quoteResults for
Magnets - Import exportNumber of results
34 ProductsCountries
Company type
Category