Magnetic design - Import export

Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°

Housing brass. Magnetic core NdFeB (neodymium). Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iron, loss of attractive force due to magnetic short circuits occurs. Diameter “D” ground to an h6 tolerance. These magnets can be shortened by the dimensions “H1” and “H2”. The magnets can be mounted by pressfit, screwingin or gluing.

Magnetic Couplings specifically for Polyurethanes process. general informations The GMDO is a permanent magnet designed to transmit torque thanks to the magnetic field established between the inner and outer rotor. The use of magnetic couplings is recommended whenever it is necessary to hermetically separated two zones in order to prevent fluid or gas leakage from an area to another. An example application is fluid transfer pumps. In this applications the fluid must not come into contact with the external environment. The magnetic coupling also prevents the transmission of vibrations and axial / radial loads to the drive shaft. . Main benefits: No fluid leakage Maintenance free Reduction of vibrations Possibility to limit a maximum torque Some example applications: Application on low pressure foaming machine Application on MDF wood gluing machine Application on high pressure machine for polyurethane Application on storage plant Application on Mixer Main technical data The...

DRILLSTAR fishing magnet is a valuable tool before diamond coring or drilling. Its strong magnetic field will retrieve all types of small steel objects from the bottom of the hole. It is available is a variety of sizes and shapes, to suit the most demanding fishing jobs. Two main designs are available : - Classic design, with a single magnet. - Modular design, using multiple small, high-strength magnets: this design enables a wide range of lifting forces and magnetic surface shapes, using the most powerful magnets available today. Mud ports can be added on the tool bottom or side to clean out the fish. Our magnets are available in two grades, depending on temperature rating : - Normal, up to 300 deg F (150 deg C). - High Temp, up to 570 deg F (300 deg C). Unlike traditional fishing magnets, DRILLSTAR Magnets are permanent and do not require any periodic re-magnetization. High-temp magnets are designed to lose very little force with temperature increase (3% per 100 deg C)

This high-end folding box for cosmetics is fitted with magnets that allow easy opening and closing. The folding box has a lot of communication space because of the special construction and inside print.

CF Set – Standard version capable of supporting up to 30 tons – Only 24 kilograms per unit – Patented design – Innovative magnetic clamp for stabilization – Only 1 person required for operation Featuring 4x CF leg