Results for
Netherlands
Jung JF520 surface and profile grinding machine in very good condition. Machine No. 1569. Year of construction 1981 - Grinding length max. 600 mm - Sliding width: 200mm - Magnet size: 500x175mm - Grinding wheel dimensions: 250x25x50.8mm Bcspaqsayd8 - Spindle speed: stepless 4200 omw./min. - 380V 4kW - Weight about 2000kg Equipment: - 1 axis digital display, - Flanges - Infinitely adjustable spindle speed - Infinitely variable hydraulic supply in transverse direction - auto lubrication system, - Automatic height feed with rapid traverse - machine books
Request for a quoteGermany
Upper run guide for long travels, unsupported in swarf areas Especially in machine tools on long travels, when the energy chain has to be used in a sliding manner, metallic swarf is a problem. guidelok is the cost-effective solution for travels, unsupported up to 50m. The guidelok horizontal is more cost-effective than many steel chains or complex sliding systems. Typical industries and applications: Machine tools, applications in swarf area, anywhere where gliding application is not recommended
Request for a quoteGermany
-For medium duty use -Minor oil influence -More suitable for indoor applications, but also for outdoor use at temperatures > 5 °C -Unsupported travel distances and up to 20 m for gliding applications -Bus connection cable for machining units/machine tools, handling, indoor cranes
Request for a quoteSpain
With its robust stainless steel structure, it is equipped with brushes. Its high-quality Low-E brushes guarantee the longevity of the brush, which is very soft and perfect for clear and Low-E glasses. The drying unit consists of a closed circuit, electric fans with air filtering device.
Request for a quoteSpain
PRODUCT DETAILS Hydropneumatic cutter feed Quick change of cutter set. Vertical and horizontal pneumatic clamps. Safe operation with protection through safety sensor. Automatic return to the starting point of the operation. Possibility of backcutting to degrees, included as standard in the machine. Design with profile support. Cutter clamping magazine. Cooling system.
Request for a quoteSpain
The butyl extruder is designed to perform the primary sealing of spacer bars of different thicknesses for insulating glass units.
Request for a quoteSpain
After the cut glass is delivered to the system, the lifting process can be performed with maximum cycle and speed automatically. Based on a vertical structure, special belts break the front and rear of the glass sheets and lift the glass. The lifting head can freely rotate 360° to lift all sides of the glass sheets. The machine is equipped with an automatic measuring system for the length, height and thickness of the glass sheet with waterproof servo motors. Water is used to cool and clean the output belts. Additional spray nozzles remove glass powder residues from the glass sheet and reduce the displacement of these particles to the downstream systems. The water cycle system is provided with the machine as a standard feature. Next to the rectangular glass, glass shaped according to the CMS shape library can be placed. Inxbqfn7D
Request for a quoteSpain
Electro-pneumatic end-cutting machine for final end-cutting operations on aluminium and PVC profiles. Equipped with a device for end-cutting at 45° to the right and left.
Request for a quoteSpain
Copy machine with vertical milling unit. Steel base Suitable for milling operations on aluminium profiles using a template or recess.
Request for a quoteSpain
Copier with vertical milling unit and 180° swivel table. Steel base and work table. Suitable for milling operations on aluminium profiles using a template or stop. The spindle speed can be electronically adjusted on the machine using an inverter. Adjustable swivel table also for intermediate grades.
Request for a quoteSpain
Titanio, Poseidone's older brother, is a robust machining center that, in its version with grippers, allows for loading sections of up to 300mm x 2600mm. It is a center dedicated to multiple pieces, which in addition to having everything necessary for machining, has a 500mm blade with a 4kw motor, to section panels of considerable size and a CNC gantry for various applications, while still being in the industrial sector.
Request for a quoteSpain
POSEIDONE is a machine that belongs to the CNC category with machining on composite panels, but has the possibility of offering much more according to the requests of the clients: it offers management of the work areas in different zones thanks to special valves and a basic pump of 500mq/h that can reach up to 1500mq/h.
Request for a quoteSpain
The GALAXY I copy milling machine is a semi-automatic machine and is specially designed for carpentry work in aluminium and PVC. Its applications are very diverse, making housings for locks with keyholes, hinges and special milling. The milling operations can be done using a template, using the copying-feeler that reproduces the figures of the template in natural size (scale 1:1) or by means of coordinates graduated in millimetres in a longitudinal or transversal direction, to make all kinds of recesses.
Request for a quoteSpain
The Galaxy IV copy router is specially designed for aluminum and PVC carpentry. 3-head copy router that allows you to attack the profile at its top, front and back without having to move the profile at any time. It has 2 easily replaceable copy templates, as well as vertical and horizontal clamps.
Request for a quoteSpain
PRODUCT DETAILS Multi-channel grooving – regardless of the copying system – with the help of supports. Pneumatic clamps. Cremone with 3-point drill, drill bits for steel reinforcement in PVC. 5 mm copying cutter. Profile support.
Request for a quoteSpain
PRODUCT DETAILS Copying system Drainage system with independent motors Triple-bit cremone system Includes profile support. Options 8 mm milling Single-phase system Milling cooling system
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Spain
FEATURES Vertical and horizontal clamping system Ease of use and safe operation thanks to its ergonomic design OPTIONAL EQUIPMENT Cutting set Workbench Three-phase system
Request for a quoteSpain
PRODUCT DETAILS Vertical and horizontal manual clamping system. Safe operation through safety sensor. Designed with profile support. Cutter clamping magazine.
Request for a quoteSpain
PRODUCT DETAILS Hydropneumatic cutter feed Vertical and horizontal pneumatic clamps. Safe operation with protection through safety sensor. Automatic return to the starting point of the operation. Possibility of trimming to degrees, included as standard in the machine. Design with support for the profile. Cutter clamping magazine.
Request for a quoteSpain
PRODUCT DETAILS • Automatic screw feeding. • Automatic end of screwing cycle. • Safety switch to prevent accidental use. • Automatic profile clamping during screwing. • Average screwing speed: 1.7 sec/piece • Automatic screwing with pressure clutch • Foot control for error-free screwing • Switch for special screw height adjustment • Profile reclining distance with adjustable support • Torque adjustment according to the screw
Request for a quoteSpain
Processes tightening of reinforcing screws used in the production of doors and windows Automatic air screw supply unit Automatic screwing with pressure clutch Automatic stop after screwing process Foot control for error-free screwing Safety switch to prevent misuse Special screw height adjustment switch Automatic compression of profiles during screwing Profile reclining distance with adjustable support Long life and easy replacement Torque adjustment according to screw Average screwing speed: 1.7 sec/2 pcs
Request for a quoteSpain
Cutting machine for PVC beading, with 45º angled cut The beading machine includes a digital and automatic roller path
Request for a quoteSpain
Automatic hydraulic aluminium angle joiner with lifting wedge Used for aluminium contour crimping processes
Request for a quoteSpain
It allows you to assemble 4 corners of aluminum profiles at the same time. It offers quick solutions by combining the power of the hydraulic system and its servo-measuring sensitivity. Thanks to the double-stage hydraulic pressure system, it minimizes user errors and guarantees a perfect joining of the corners.
Request for a quoteSpain
4m/3-axis numerically controlled composite panel processing machine. Designed to join, cut and perform similar operations on various panels and sheets. Thanks to its spindle that can process at angles of -90º, 0º and +90º. It offers optional profile processing, different sizes of aluminum and PVC profiles can be processed, and a wide range of solutions is offered, such as milling operations, drilling of water drainage channels, marking and notching.
Request for a quoteSpain
"It is used to tighten the reinforcement screws used in the production of doors and windows"
Request for a quoteSpain
It offers the possibility of assembling in series, quality and standard form all the double opening accessories used in different series of different sizes and profiles of window frames, according to different profiles without using a pencil and a gauge and without the need for a mold and template.
Request for a quoteResults for
Machine-tools - Import exportNumber of results
225 ProductsCountries
Company type
Category