Results for
KYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LTC1151CN8 is a high performance, low power, chopper stabilized instrumentation amplifier. It is designed to provide superior performance in a wide variety of applications.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LT®1964 is a micropower low noise, low dropout negative regulator. The device is capable of supplying 200mA of output current with a dropout voltage of 340mV. Low quiescent current (30μA operating and 3μA shutdown) makes the LT1964 an excellent choice for battery-powered applications. Quiescent current is well controlled in dropout.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LT®8610 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5µA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. Low ripple Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability
Request for a quoteIGUS® GMBH
Germany
DryLin® R - Installation videos System selection & service life calculation DryLin® R - Introduction and technical information Special info on DryLin® R linear plain bearing L1 series drylin® igus® test method Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees ruggedness even in extreme environments. DryLin® R - Installation videos Advantages: 100 % lubricant-free Dimensionally interchangeable with (recirculating) ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock 8 different shaft materials Replaceable liners VA stainless steel housing available When not to use it? When little installation space is available drylin® N drylin® W When twist-protection is required for single-axis systems DryLin® T DryLin® N Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts
Request for a quoteMEREFIELDS ELECTRONICS LTD
United Kingdom
We Supply a very wide Range of LINEAR TECHNOLOGY Parts. We have over 10Millions Lines of Components in our Supply. Please Contact liamm@merefields.com for Quotes.
Request for a quoteSCHOCK GROUP
Germany
Ball bearing full extension slides, extendable on both sides for a 100%+ extension length. Load capacity up to 12 kg per pair. Standard rail length 246 mm. Manufactured in the European Union. For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability. Long service life without maintenance. Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.
Request for a quoteSCHOCK GROUP
Germany
Telescopic Rail 57.5 x 16 mm, Galvanized Steel, Standard Length 1100 mm, Load Capacity up to 70 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 70 kg per pair Standard Rail Length 1100 mm Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.
Request for a quoteSCHOCK GROUP
Germany
Ball bearing partial extension slides with a 70-80% extension length Load capacity up to 56 kg per pair Standard rail length up to 660 mm Separable inner rail Locking in the open position Closed end stop Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.
Request for a quoteSCHOCK GROUP
Germany
Telescopic Rail 45 x 12.7 mm, Galvanized Steel, Standard Lengths up to 600 mm, Load Capacity up to 40 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 40 kg per pair Standard Rail Length up to 600 mm Separable Inner Rail The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.
Request for a quoteSCHOCK GROUP
Germany
Ball bearing full extension slides with a 100%+ extension length Load capacity up to 20 kg per pair Standard rail length up to 550 mm Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.
Request for a quoteSCHOCK GROUP
Germany
SCHOCK has been a successful innovator and manufacturer of ball guides for linear motion technology for decades. SCHOCK ball guides are known for their precision, high load capacities, and long lifespan. Key features of SCHOCK ball guides include: Excellent running properties High operational reliability Long lifespan without maintenance Custom connection options Based on individual customer requirements, we develop and manufacture ball guides as runner guides, partial extension, full extension, or over-extension. In collaborative project planning with our customers, we define the product requirements for the ball guides. Our customers benefit from a wide selection of rail profiles, mounting systems, comfort features, and high-quality surface finishes, such as SCHOCK powder coating. We supply powder-coated ball guides in any desired RAL color, offering you unique design possibilities.
Request for a quoteSCHOCK GROUP
Germany
Ball Bearing Full Extension Slides - 100%+ Extension Series 036 with Locking Mechanism Ball bearing full extension 100%+ extension range Load capacity up to 67 kg per pair Standard rail length up to 750 mm Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH, starting from a quantity of one. Custom solutions are available from Schock Metall based on orders or projects. We look forward to receiving your project inquiry, including your annual requirements and expected serial start date.
Request for a quoteSCHOCK GROUP
Germany
Ball Bearing Guidance Full Extension 100% Travel Load Capacity up to 100 kg per Pair Standard Rail Length up to 750 mm Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball-bearing telescopic slides for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high load. High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock and can be ordered from quantities of one piece upwards. Custom solutions are available from Schock Metall based on project-specific or order-specific requirements. We look forward to receiving your project inquiry, including your annual demand and expected serial start date.
Request for a quoteSCHOCK GROUP
Germany
Ball Bearing Guidance Full Extension 100% Extension Range Load Capacity up to 50 kg per Pair Standard Rail Length 1500 mm Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball-bearing telescopic slides for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner, SToxxparts GmbH, in stock and starting from a quantity of one. Custom solutions are available from Schock Metall based on orders or projects. We look forward to receiving your project inquiry, including your annual requirement and expected serial start date.
Request for a quoteSCHOCK GROUP
Germany
These telescopic slides, featuring an over-extension design, are made from galvanized steel and are available in standard lengths of up to 550 mm. They have a load capacity of up to 60 kg per pair, making them suitable for various applications. Key Features: Material: Galvanized steel Type: Over-extension Load Capacity: Up to 60 kg per pair Standard Length: Up to 550 mm Soft Close: Yes, with a soft close mechanism over the last 50 mm of extension Manufactured in the European Union The Schock Group has over 40 years of experience in developing and manufacturing ball-bearing telescopic slides for linear motion technology. These slides are known for their smooth and quiet operation, even under heavy loads, ensuring both reliability and durability. Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH, with no minimum order quantity. Custom solutions can be provided by Schock Metall based on your specific project requirements.
Request for a quoteSCHOCK GROUP
Germany
Telescopic slide 70 x 18 mm, galvanized steel, standard length up to 1100 mm, load capacity up to 200 kg per pair. These slides feature full extension with a 100% extension range, providing a smooth and secure linear movement. They are designed for heavy-duty applications and can handle loads of up to 200 kg per pair. The Schock Group has over 40 years of experience in developing and manufacturing ball-bearing telescopic slides for linear motion technology. The advantageous physical properties of the ball bearing guidance system form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High functional reliability. Long service life without the need for maintenance. Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered in quantities as low as one pair.
Request for a quoteSCHOCK GROUP
Germany
Telescopic Slide 57.5 x 34 mm, Galvanized Steel, Standard Length up to 1200 mm, Load Capacity up to 150 kg per Pair Ball Bearing Full Extension, 100% Extension Load Capacity up to 150 kg per Pair Standard Slide Length up to 1200 mm Especially Suitable for Extra-Wide Drawers Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball-bearing telescopic slides for linear motion technology. The advantageous physical properties of the ball bearing system form the basis for the high performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock and starting from a quantity of one. Custom solutions are available from Schock Metall on a project-specific basis.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHOCK GROUP
Germany
Telescopic Rail 37.5 x 13 mm, Galvanized Steel, Standard Lengths up to 473 mm, Load Capacity up to 35 kg per pair Partial Extension Ball Bearing Guide with Double-Sided Extension (70-80%) Load Capacity up to 35 kg per pair Standard Rail Length up to 473 mm Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry,
Request for a quoteSCHOCK GROUP
Germany
Telescopic rail 27.2 x 20 mm, stainless steel, standard lengths up to 600 mm, load capacity up to 35 kg per pair Ball bearing over-extension Load capacity up to 35 kg per pair Standard rail length up to 600 mm Closed end stop Operating temperature up to +200°C Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high load High functional reliability Long service life without maintenance
Request for a quoteSCHOCK GROUP
Germany
Telescopic Rail 35.2 x 19 mm, Galvanized Steel, Standard Lengths up to 660 mm, Load Capacity up to 52 kg per Pair Ball Bearing Over-extension Load Capacity up to 52 kg per Pair Standard Rail Length up to 660 mm Separable Inner Rail Locking in Open Position Closed End Stop Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high loads. High functional reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH in stock and from a quantity of one piece upwards.
Request for a quoteSCHOCK GROUP
Germany
Telescopic Rail 57.5 x 17.5 mm, galvanized steel, standard lengths up to 750 mm, load capacity up to 80 kg per pair. This telescopic rail from the Schock Group is designed for over-extension with a 100%+ extension range, making it ideal for applications where full access to the drawer or component is necessary. It is made from galvanized steel and offers a load capacity of up to 80 kg per pair, making it suitable for heavy-duty applications. Key Features: Telescopic Rail Type: Over-extension Material: Galvanized steel Standard Lengths: Up to 750 mm Load Capacity: Up to 80 kg per pair Locking Mechanism: Included Manufactured in the European Union Schock Group has over 40 years of experience in designing and manufacturing ball-bearing telescopic rails for linear motion technology. Their telescopic rails are known for their smooth and quiet operation, even under high loads, as well as their reliability and long service life without the need for maintenance.
Request for a quoteSCHOCK GROUP
Germany
Telescopic rail 17 x 10 mm, galvanized steel, standard lengths up to 374 mm, load capacity up to 10 kg per pair Ball bearing partial extension Load capacity up to 10 kg per pair Standard rail length up to 374 mm Double-sided pull-out Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guidance form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high load High functional reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock and from a quantity of one. Custom solutions are available from Schock Metall based on orders or projects. We look forward to receiving your project inquiry with details of your annual requirements and your expected series start date.
Request for a quoteSCHOCK GROUP
Germany
Telescopic Rail 53 x 19 mm, Stainless Steel, Standard Length 500 mm, Load Capacity up to 120 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 120 kg per pair Standard Rail Length 500 mm The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.
Request for a quoteSCHOCK GROUP
Germany
T Telescopic Rail 27.2 x 20 mm, Galvanized Steel, Standard Length 310 mm, Load Capacity up to 20 kg per pair Over-extension Ball Bearing Guide Load Capacity up to 20 kg per pair Standard Rail Length 310 mm With Locking Mechanism Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.
Request for a quoteSCHOCK GROUP
Germany
Telescopic Rail 27.2 x 10 mm, Galvanized Steel, Standard Lengths up to 470 mm, Load Capacity up to 15 kg per pair Partial Extension Ball Bearing Guide Load Capacity up to 15 kg per pair Standard Rail Length up to 470 mm Manufactured in the European Union The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LTC2440CGN#PBF is a high-performance, low-power, 16-bit, sigma-delta analog-to-digital converter (ADC) with an SPI interface. It is designed to provide accurate, low-noise conversion of differential analog signals in a wide range of applications. The LTC2440CGN#PBF features a wide input range of 0°C to 70°C, a low power consumption of only 1.2 mW, and a fast conversion rate of up to 1.5 MSPS. It also offers a wide range of features, including a programmable gain amplifier, a programmable digital filter, and a programmable reference voltage. The LTC2440CGN#PBF is ideal for applications such as medical imaging, industrial process control, and automotive systems. It is available in a 16-SSOP package and is RoHS compliant.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LTC3862IGN#TRPBF is a linear DC-DC switching controller from Analog Devices. It is designed to provide a high-efficiency, low-noise, and low-EMI solution for a wide range of DC-DC conversion applications. It features a wide input voltage range of 4.5V to 28V, a wide output voltage range of 0.8V to 40V, and a maximum output current of 6A. The device also features a high-frequency switching frequency of 75kHz to 500kHz, a duty cycle of up to 0.96, and a synchronous rectifier for improved efficiency. The LTC3862IGN#TRPBF is available in a 24-SSOP package and is supplied in tape and reel (TR) alternate packaging. It is suitable for use in a variety of applications, including automotive, industrial, and consumer electronics
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LTC2306CDD#TRPBF is a 12-bit, single-channel, SAR-based analog-to-digital converter (ADC) with a multiplexed sample-and-hold (MUX-S/H-ADC) architecture. It features two differential or single-ended inputs, a 5V analog supply voltage, and a 5V digital supply voltage. The device is packaged in a tape and reel (TR) alternate packaging for easy integration into automated assembly processes. Features: • 12-bit resolution • Multiplexed sample-and-hold (MUX-S/H-ADC) architecture • Two differential or single-ended inputs • 5V analog supply voltage • 5V digital supply voltage • Packaged in a tape and reel (TR) alternate packaging Applications: • Automated assembly processes • Industrial process control • Automotive systems • Medical instrumentation • Data acquisition systems
Request for a quoteResults for
Linear technology - Import exportNumber of results
35 ProductsCountries
Company type