It audio - Import export

RockNet 300 is a versatile digital audio network solution for live sound applications providing up to 160 channels and 96 kHz / 48 bit. RockNet is a real-time, low latency audio distribution network tailored to tour and installed sound applications. RockNet provides a universal solution to almost any imaginable audio distribution challenge and behaves very much like a traditional analog split system. It conveys up to 160 24 bit/48 kHz audio channels counter- rotating on a single CAT5 cable. RockNet products are designed for heavy-duty road use. Their ruggedized steel enclosures resemble the look and feel of a modular stage box. All devices feature locking IEC connectors for the redundant power supplies. All other connectors are entirely gold-plated, and the circuit design is streamlined for ultra low noise and minimum distortion to meet the highest demands in audio quality. RockNet is a genuine audio network platform designed purposely for live sound applications. It is a...

RockNet is a real-time, low latency audio distribution network tailored to tour and installed sound applications. RockNet provides a universal solution to almost any imaginable audio distribution challenge and behaves very much like a traditional analog split system. It conveys up to 160 24 bit/48 kHz audio channels counter-rotating on a single CAT5 cable. RockNet products are designed for heavy-duty road use. Their ruggedized steel enclosures resemble the look and feel of a modular stage box. All devices feature locking IEC connectors for the redundant power supplies. All other connectors are entirely gold-plated and the circuit design is streamlined for ultra low noise and minimum distortion to meet the highest demands in audio quality. RockNet is a genuine audio network platform designed purposely for live sound applications. It is a cost-effective, integrated networking product invented, designed, and optimized for audio contribution and distribution. RockNet provides ultra...

RockWorks is a real-time management system for RockNet and enhances the remote operation of complex widespread networks. Each RockNet device can be monitored and con gured on screen according to the front panel operation. RockWorks enables labeling of each device and channel within the network. The software provides alarm indications and allows for a network- wide default reset of channel parameters and naming. For a more comfortable setup, RockWorks also features an offline editor. RockWorks MY Card Preset Dialog The RockWorks preset dialog provides full access to RockNet MY interface card presets and allows for the individual configuration of emulation mode, channel routing, microphone pre-amp count (RN.301.MI/RN.101.IO) as well as sync master settings. A total of 15 presets (1...9, A...F) can be configured. Presets are activated by using the rotary switch on the front panel of the RockNet MY cards. In order to enable maximum flexibility in routing, the number of dropped...

In addition to the MADI interfaces available on the processor card, the MN-RN300 RockNet Audio Interface Card gives access to the wide range of Riedel RockNet audio interface modules.

In addition to the MADI interfaces available on the processor card, the MN-RN300 RockNet Audio Interface Card gives access to the wide range of Riedel RockNet audio interface modules.

Philips Fidelio T1WT/00 Wireless Earbuds TWS, ANC, BT 5.2, White EU

Test Lead from Mueller Cables Connection End 1 Stackable Banana Connection End 2 Stackable Banana Wire Gauge (AWG) 18 Amps 20 Wire Insulation Material Silicone Rohs Compliant YES, Exemption 6c

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

Product Features: • Designed for general purpose or replacement use in push-pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz. (+/- 1db max. ref. 1 Khz.). • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.

Product Features: • Applications: Driver, Input, Interstage, Isolation. • 100mW power level at 200Hz. - 15kHz. • Pin type (0.0375" x .02"), P.C. board mount. • Economical, open type construction. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion less than 0.5% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.187" grid pin spacing. • Insulation test 1500V rms, • Net weight: 0.5 oz.

Product Features: • "Over designed" for high fidelity, single ended, Class-A, tube output circuits (triode, tetrode or pentode tubes). • Enclosed (shielded), four slot, chassis Type "X" mounting. • Frequency response at least 20 Hz. to 20 Khz. at full rated power (+/- 1 db max., ref. 1 Khz). • Insulated flexible leads 8" min. • For maximum versatility, all units (except the 1642SE and 1638SEA do NOT include this screen tap as they were designed principally for high impedance triode tubes. • High quality laminations, (M6) grain oriented silicon steel. • Core is gapped to reduce core saturation in Class-A tube amplifier circuits.

Product Features: • Designed for push-pull tube output circuits. • Enclosed (shielded), 4 slot, above chassis Type "X" mounting. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • Manufactured with plastic coil forms for coil support and insulation. • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. • Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications.

Product Features: • Small, economical, open, two hole horizontal bracket mount. • Insulated, colour coded flexible leads, 4" long minimum (143, 144 and 145 Series) or 3" long minimum (146 Series). • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.). • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher. • Net weight: 0.5 oz. (143, 144, 146 Series) and 1.4 oz. (145 Series).

Product Features: • Designed for general purpose or replacement use in Push-Pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz at full rated power (+/- 1 db max. ref. 1 Khz). • Open style with minimum 5" long primary leads. • Secondary solder lugs for convenient secondary connections (except 125B - uses minimum 5" secondary leads). • Primary impedances from 1,200 to 25,000 Ohms. • Secondary impedances from 1.5 to 15 Ohms.

Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone". • Output transformers marked UPGRADE allow for more versatility by added secondary connections that did not exist on the original units.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware. • Includes wire leads (minimum length of 4"). • Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz. • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. (except 841A, 842A and 844A which are +20 dbm) with specified characteristics, or higher levels with reduced low frequency performance. • Electrostatic shield between prim. and sec. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching. • Overall dimensions 1.75" (44.5mm) wide x 1.25" (31.8mm) deep x 2.56" (65mm) high max. • Shipping weight 0.5 lbs (0.2 kg).

Product Features: • Rugged black epoxy potted case with 9 pin connections (.025" square by 0.5" long). • Frequency response minimum @ 0 dbm +/- 1 db max. (+/- 0.5 db is typical) of 30 Hz. to 30 Khz., except 560Q which is 30 Hz. to 15 Khz. • Higher signal levels possible with reduced low frequency performance. • Insert loss of 1 db maximum. • Electrostatic shield between primary and secondary connected to core and brought out to pin "SH". • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. • Primaries and secondaries can be reversed for impedance matching. • Overall dimensions 1.64" (41.7mm) x 1.33" (33.8mm) x 0.85" (21.6mm) high max. • Shipping weight 4 oz. (0.1 kg).

Product Features: • Pin type (0.25" length and 0.025" square), P.C. board mount. • Economical, open type, horizontal bracket construction. • Includes clinching lugs for extra mounting strength. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 2" grid pin spacing. • Insulation test 250V rms. • Net weight: 0.6 oz. (148 Series) and 1.0 oz. (149 Series).

Product Features: • Pin type (0.25" length and 0.025" square), P.C. board mount. • Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2" grid pin spacing. • Insulation test 250V rms. • Net weight: 0.6 oz. (148 Series) and 1.0 oz. (149 Series).

Product Features: • Pin type (0.25" length and 0.035" diameter), P.C. board mount. • Low profile, open type construction. • Frequency response 200 Hz. - 50 Khz. (+/- 1 db, ref. @ 1 Khz.). • Net weight 0.6 oz.