Results for
SPM - SOCIÉTÉ PYRÉNÉENNE DE MÉTALLURGIE
France
Lifting and handling equipments Design and manufacture. All-inclusive delivery with control reviw
Request for a quoteSPARX MACHINE TOOLS
United Kingdom
The Kuhlmeyer ZBS Twin Belt Grinding Machine is built for the roughing and finishing on welded edges, corners and surfaces on flat and mid-size workpieces out of steel, stainless steel, and aluminium, i.e. doors, frames, cabinets, housings, hoods, furniture parts, frame parts in automotive and aircraft – manufacturing, round bins, cylinders, heaters etc.
Request for a quoteIGUS® GMBH
Germany
Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible
Request for a quoteIGUS® GMBH
Germany
Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible
Request for a quoteIGUS® GMBH
Germany
Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification
Request for a quoteIGUS® GMBH
Germany
Upper run guide for long travels, unsupported in swarf areas Especially in machine tools on long travels, when the energy chain has to be used in a sliding manner, metallic swarf is a problem. guidelok is the cost-effective solution for travels, unsupported up to 50m. The guidelok horizontal is more cost-effective than many steel chains or complex sliding systems. Typical industries and applications: Machine tools, applications in swarf area, anywhere where gliding application is not recommended
Request for a quoteIGUS® GMBH
Germany
Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness
Request for a quoteIGUS® GMBH
Germany
The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips
Request for a quoteIGUS® GMBH
Germany
Other information Installation video: Instructions for the opening and closing of the E-Tubes Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides Installation video: Instructions for the opening and closing of the E-Tubes E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Chip protection, swivelable Excellent protection against chips (even hot chips) Rugged and tight Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time Space-saving through good internal/external dimensions ratio Modular interior separation options Double stop dog system for longer service life and long, unsupported lengths Universal KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Machine tools Timber Processing Machines General mechanical engineering etc In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Hi-Tec Shut-Off Impulse Tool. The lightweight Yokota YLT series impulse wrenches with double chamber air motor achieve the required torque very quickly. The tools have a high number of impulses per second, and therefore very accurate torques can be realised, resulting in increased production speed. Design innovation and the application of new materials significantly reduce the weight and increase the service intervals. Yokota impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools therefore can speed up assembly lines substantially. [...]
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Hi-Tech Impulse Tool with Double Chamber Air Motor. The lightweight Yokota YLa series impulse wrenches with double chamber air motor achieve the required torque very quickly. The tools have a high number of impulses per second, and therefore very accurate torques can be realised, resulting in increased production speed. Design innovation and the application of new materials significantly reduce the weight and increase the service intervals. Yokota impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools therefore can speed up assembly lines substantially. [...]
Request for a quoteCUPASO DEUTSCHLAND GMBH
Germany
This range of linear checkweighers is designed to fit all types of packaging machines, tray conveyors or simply for manual bag filling. These scales are compatible with a wide range of products: - Sweets - Cakes - Chocolate - Coffee - Rice - Detergent - Nuts and bolts - Confetti ... All parts that come into contact with the product are made of food-grade stainless steel and are easily removable.
Request for a quoteCUPASO DEUTSCHLAND GMBH
Germany
Features: - Programme recovery function - All hoppers can be opened to facilitate cleaning - The weighing hopper can be preset in an offset position to avoid jamming - Multilingual control panel: English, French, German, Spanish... - Discharge capacity: 800 - 1500 g - Weighing accuracy: 0.5 - 2 g - Speed: Max. 45 weighings / minute
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The 2200PTP Series Wireless Power Tools are designed to work with the Global 400 and Global 400mp controller systems. These wireless tools are designed for industrial assembly use. The tool is completely dependent on the Global 400/400mp for directions and torque results reporting. Details on learning and programming the tool through the Global 400/400mp controllers may be found in the controller manual. Models 2200PTP-18: 3-18 Nm / 50-100 RPM 2200PTP-24: 6-24 Nm / 50-600 RPM Key Highlights Report torque/angle values with the results Kits come with side handle
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The 2100PTP Series Wireless Power Tools are designed to work with the Global 400 and Global 400mp controller systems. These wireless tools are designed for industrial assembly use. The tool is completely dependent on the Global 400/400mp for directions and torque results reporting. Details on learning and programming the tool through the Global 400/400mp controllers may be found in the controller manual. Model 2100PTP-12: 3-12 Nm / 700-100 RPM Key Highlights Adjustable clutch sets torque limit Report OK/NOK results Kits come with an adjustment tool Double hit detection
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The 2100PTA Series Wireless Angled Power Tools are designed to work with the Global 400 and Global 400mp controller systems. These wireless tools are designed for industrial assembly use. The tool is completely dependent on the Global 400/400mp for directions and torque results reporting. Details on learning and programming the tool through the Global 400/400mp controllers may be found in the controller manual. Models 2100PTA-45: 18-45 Nm / 210-300 RPM 2100PTA-90: 40-90 Nm / Fixed 100 RPM Key Highlights Adjustable clutch sets torque limit Report OK/NOK results Kits come with an adjustment tool Double hit detection Adjustable speed defined by controller parameter (2100PTA-45 only)
Request for a quoteHONSEL-GROUP
Germany
Small and light. With a weight of only 1.6 kg incl. battery, very compact dimensions and excellent ergonomics, the tool is perfectly equipped for daily use and every installation situation. Strong. 10,000 N setting force in combination with the new brushless motor makes it possible to reliably process any blind rivet up to 5.0 mm. Fast. With a pure setting process of less than one second, 30 blind rivets can be processed in 60 seconds. This means that the Rivdom eBZ 1 is twice as fast as comparable tools and saves more than 45 minutes working time per day! The ideal tool for industrial series production.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DOREY
France
The Die Cutting machine type EDP-W represents the highest automated system to cut various types of materials into the desired shapes. Feeding of material is automatic and managed by a transportation conveyor running together with a beam holder. Machine power permits to cut shapes of various sizes. From light to heavy materials and of different thicknesses could be processed. EDP-W has a wide range of configurable cutting forces and cutting head surface.
Request for a quoteDOREY
France
The Die Cutting machine type EDP-C represents, in a compact size, the highest automated system to cut various types of materials into the desired shapes. Feeding of material is automatic and managed by a transportation conveyor running together with a beam holder. Machine power permits to cut shapes of various sizes. From light to heavy materials and of different thicknesses could be processed. EDP-C has a wide range of configurable cutting forces and cutting head surface.
Request for a quoteDOREY
France
First introduced in 1999, many innovative solutions were integrated into this machine to ensure absolute reliability and cuts of the highest quality. If you’re looking for fast and efficient production cycles and high quality cut panels made with an easy to use machine, SM 400 TA is the solution for you. To solve the problem of shrinking crystal (clear) PVC we developed a system for the just in time heat treatment with infrared light. After the treatment the crystal PVC will remain perfectly stable and can be integrated in products such as industrial doors, tents or terace covers without the danger of shrinkage, even when exposed to sunlight or cold. SM 400 TA installs a wide range of industrial cutting tools for the creation of top quality fabric panels. A selection of accessories make this machine the complete solution for your panel cutting requirements.
Request for a quoteCREISCENDO
France
Do not hesitate to contact us for your requests for industrial and HVAC insulation tools, insulation rockwool, foamglass, aluminium foils etc... www.soliso.fr screiche@soliso.fr +33.6.76.18.78.74 (Whatsapp)
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • The KMFA range of high performance three phase industrial mains filters are designed for all drives applications including servo, inverter and motor drives. • This range is three phase from 6 Amps to 820 Amps and is economically priced, lightweight, side mounting, and has IP rated terminal blocks. • Typical industrial applications include machine tools, UPS, drives, industrial controls, process controls and mechanical handing equipment etc. • Designed to meet UL1283 and EN 133200 these filters will enable end users to meet EN 55011A and EN 55022B legislation. • All products are RoHS compliant and approvals held include UL and cUL.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • The KMF range of three phase industrial mains filters are designed for all types of industrial automation. • This range is three phase form 6 Amps to 180 Amps and is economically priced, lightweight, side mounting and has IP rated terminal blocks. • Designed to meet UL1283 and EN 133200 these filters will enable end users to meet EN 55011A and EN 55022B legislation. • Typical applications include machine tools, UPS, industrial controls, process controls and mechanical handling equipment etc. • All products are RoHS compliant and approvals held include UL and cUL.
Request for a quoteAPER DIAMOND SL
Spain
VALVES ARE EQUIPPED WITH EASYTOMANEUVER BYPASS VALVES AND SAFETY EXHAUST VALVE WHICH REDUCES THE RISK OF DUST COLLECTION BAG BREAKAGE. APPLICATIONS THE HTC 80 ID II CONCRETE FLOOR POLISHER IS A MACHINE EQUIPPED WITH DUST EXTRACTOR, IT IS DESIGNED FOR POLISHING AND GRINDING CONCRETE FLOORS AND OTHER MATERIALS SUCH AS MARBLE, CERAMICS, AMONG OTHERS. MARKETS TOOL AND MACHINERY, INDUSTRIAL AND HOME MAINTENANCE, CONSTRUCTION, NONMETALLIC PAINTS AND COATINGS, REAL ESTATE.
Request for a quoteFAIRON BEARINGS INTERNATIONAL
Belgium
The Company and the Group KRAFTWERK Europe AG Founded in 1979 as the individual company IMPEX Patrick Wyss, the business became a family-run incorporated company in 2006, taking the name KRAFTWERK Europe AG due to the degree of familiarity of the KRAFTWERK brand. The main activities of KRAFTWERK Europe AG are the design, development, production, import, export, marketing and distribution of high-quality tools for professional and industrial use. KRAFTWERK Europe AG is the owner of the worldwide registered KRAFTWERK® industrial tool brand, which is well-known today in every European country and also in Asia. The company also sells other brands of tools. Due to its talent for innovation, KRAFTWERK Europe AG holds several registered patents and copyrights around the world. The hand tools are in generally manufactured in Asia by carefully chosen, ISO-certified plants with strict quality controls by KRAFTWERK Europe AG’s own personnel. Along with ensuring high quality standards, our main p
Request for a quoteFAIRON BEARINGS INTERNATIONAL
Belgium
The Company and the Group KRAFTWERK Europe AG Founded in 1979 as the individual company IMPEX Patrick Wyss, the business became a family-run incorporated company in 2006, taking the name KRAFTWERK Europe AG due to the degree of familiarity of the KRAFTWERK brand. The main activities of KRAFTWERK Europe AG are the design, development, production, import, export, marketing and distribution of high-quality tools for professional and industrial use. KRAFTWERK Europe AG is the owner of the worldwide registered KRAFTWERK® industrial tool brand, which is well-known today in every European country and also in Asia. The company also sells other brands of tools. Due to its talent for innovation, KRAFTWERK Europe AG holds several registered patents and copyrights around the world. The hand tools are in generally manufactured in Asia by carefully chosen, ISO-certified plants with strict quality controls by KRAFTWERK Europe AG’s own personnel. Along with ensuring high quality standards, our main p
Request for a quoteFAIRON BEARINGS INTERNATIONAL
Belgium
The Company and the Group KRAFTWERK Europe AG Founded in 1979 as the individual company IMPEX Patrick Wyss, the business became a family-run incorporated company in 2006, taking the name KRAFTWERK Europe AG due to the degree of familiarity of the KRAFTWERK brand. The main activities of KRAFTWERK Europe AG are the design, development, production, import, export, marketing and distribution of high-quality tools for professional and industrial use. KRAFTWERK Europe AG is the owner of the worldwide registered KRAFTWERK® industrial tool brand, which is well-known today in every European country and also in Asia. The company also sells other brands of tools. Due to its talent for innovation, KRAFTWERK Europe AG holds several registered patents and copyrights around the world. The hand tools are in generally manufactured in Asia by carefully chosen, ISO-certified plants with strict quality controls by KRAFTWERK Europe AG’s own personnel. Along with ensuring high quality standards, our main p
Request for a quoteC. AUGUST HÜCHELBACH GMBH & CO. KG
Germany
Quenching und tempering of tool steels primarily for the saw- and knive industry. Many reputable saw- and tool companies are taking advantage of our highly developed heat treatment service which is well known in several countries arround the world.
Request for a quoteG D RECTIFIERS LTD
United Kingdom
Standard and custom heatsinks, heatsink accessories and heatsink assemblies. GD Rectifiers stock and machine the UK's largest range of heatsinks suitable for stud, modules and capsule semiconductors, alongside high power LED applications.
Request for a quoteResults for
Industrial tools - Import exportNumber of results
30 ProductsCompany type
Category