High-voltage - Import export

High-voltage 5.8kWh LiFePO4 (LFP) battery with integrated BMS module supporting up to 4 batteries designed for use with SolaX inverters for a wide range of applications

High-voltage 5.8kWh LiFePO4 (LFP) battery with integrated BMS module supporting up to 4 batteries designed for use with SolaX inverters for a wide range of applications

Ruida RDC6442G controller is compatible with Ruida RDC6442G color display, which is also in our catalog. The device has an internal memory of 128 MB. There are 15 LEDs on the case for diagnosing the operation of the equipment. There are 3 connectors on one side of the device: two for connecting to a computer and one for a USB drive. On the other side there are connectors for connecting the display, power supply, high voltage unit of the Z series. You can connect two high voltage units at once.

Designed for the manufacture of highvoltage insulators (550 kV), this press is one of the largest presses made by REP. The dimensions of the parts to be injected explain the huge size of the press 660 mm in diameter, 2,600 mm long, moulded in one go. The production of a complete insulator is therefore performed in one or two cycles, thus significantly increasing the profitability and reliability of the parts. Machine features Closing force 24,000 kN Size of the platens 1,500 x 3,000 mm Injection volume 25,000 cm³ x 2 (2 injection units)

They have excellent mechanical and electrical properties as well as a high conformability. Offer outstanding resistance to cut through and are impact and abrasion resistant. They also offer excellent dielectric strength, while the burning of the adhesive forms a non-conductive ash. UL510 for flame retardance. Acrylic adhesive can be thermoset. The polyimide backing meets MIL-P-46112B.

Product Features: • 115 VAC - 60 Hz. single primary. • All secondaries are center tapped (C.T.). • Open style, 4 hole frame chassis mount. • Minimum 6" long leads or copper tabs with holes. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (#LR209651).

Product Features: • Primary: Universal - 100, 110, 120, 200, 220, 230, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. (except part number 379WX - uses a separate 60VAC 0.2 Amp winding). • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Models: This series is an upgrade from the entire 200 Series range of units PLUS 2 models designed specifically for 300B tubes (Part number 300BX) and 2A3 tubes (Part Number 302AX). • Finish: Black powder paint to match the 1650 Series of output transformers • Units can be run full wave bridge or full wave C.T. • Conservative designs - CSA certified (209651).

Product Features: • Two versions are available: • Primary 115 VAC, 50/60 Hz. or • Primary 117/234 VAC, 50/60 Hz • A 2,000 VAC and above, secondary leads are through rubber bushings. • Units can be run full wave bridge or full wave C.T. • V.A. is a C.C.S. rating. • Current ratings are CCS (Continuous Commercial Service) and ICAS ratings (Intermittent Commercial or Amateur Service). • Enclosed, 4 hole chassis mount. • Minimum 6" long leads. • Class A insulation (105°C). • Hi-Pot test at a minimum of twice secondary voltage. • Conservative designs - CSA certified (209651).

Product Features: • A perfect match to the 1650P Series Potted Output transformers. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Mounting hardware included. • Primary: Universal - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Finish: Black powder paint to match the 1650P Series of potted output transformers. • Units can be run full wave bridge or full wave C.T. • c UL us recognized (E207860).

Product Features: • Primary 115 VAC 60 Hz. - except as noted. • Enclosed, 4 hole, chassis mount. • Minimum 6" long leads. • Units can be run full wave bridge or full wave C.T. • Class A insulation (105°C). • Hi-Pot test of 2,000V RMS. • Conservative designs - CSA certified (209651). • Note: A production "running change" has been made to the primary winding - effective with August 2009 production.

Product Features: • The KMFV is a range of 600V, high performance three phase industrial filters and are designed for industrial applications within harsh environments such as the petrochem industry. • The KMFV range of high voltage, three phase industrial mains filters and are designed for use in industries such as mining and renewable energy. • Current ratings 6A to 320A for use on a 600V power supply (Canada). • Current ratings 420A to 820A for use on a 690V power supply. • This range is three phase from 6 Amps to 820 Amps and is economically priced, lightweight, side mounting and has IP rated terminal blocks. • Designed to meet UL 1283 and EN 133200 these filters will enable end users to meet EN 55011A and EN 55022B legislation. • All products are RoHS compliant and approvals held include UL and cUL.

Fuel Transporter Monitoring, Sensor application in the mining industry, Application on diesel generator sets, Heavy machine monitoring, Garbage Truck monitoring, Concrete mixer monitoring, Precision monitoring in refrigerators, On a high voltage line and etc.

With the FPM (once F&G) explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors in protection IP 54 to IP 65, and Ex d and Ex de. All motors are also available as special versions to suit your individual requirements. The quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, ATB Motorentechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93). We supply from our existing stock Kalefeld F&G- flameproof motors / hazardous motors Ex de IIC T4 High Efficiency IE2 in frame size 80 - 200 ( 2 and 4 -poles ) 0, 75 - 37 kW. All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 6-8 weeks after receipt of order . FPM Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency High Voltage Motors high voltage motors in flameproof enclosures which provide reliable drive power in industrial plants and equipment in the chemical, petrochemical and offshore industries. The extreme operating conditions which prevail in these areas demand the highest levels of operational safety and reliability. This motor is particularly low in noise and is equipped with built-in temperature sensors for monitoring the bearings. An additional terminal box for PT 100, anti-condensation heaters, etc. is also provided Performance range 160 - 800 kW Ex-proof II 2 G Ex de IIC T4