High-alloy steel - Import export

Housing Form A plastic. Housing Form B die-cast zinc alloy. Active face POM. Housing Form C high-alloy stainless steel Version: Voltage: U = 10 – 30 V DC Function: Normally open Switch type: PNP Mounting type: flush Security type: IP 67 Note: Non-contact, functions wear-free with high switching frequency and accuracy. Non-sensitive to vibrations, dust and moisture. Inductive sensors record all metals without contact. Form C enables screw fastening in a T-slot. Is safe and saves space as the proximity switch lays flush in the slot. Short-circuit proof and reverse-polarity protected.

Drillstar taper taps and die collars are manufactured from high-grade alloy steel and cemented to ensure the highest strength. They are available in a wide range of sizes, and can be equipped with different types of guides. Taper Taps Plain type Drillstar taper taps are either plain or fluted, with four longitudinal grooves which allow the easy evacuation of cuttings. The hardened cutting teeth (wickers) are available with either right-hand or left-hand spiral. Over a meter in length, the taps offer two particular advantages : First, they can be screwed into the washover subs, thus allowing the tap to be guided by an external tube. Secondly, due to the fine tapering of the threads, the tap can be screwed further into the fish head and will accept considerable pull without releasing the fish. Skirted type For difficult fishing operations, Drillstar Industries has developed a skirted taper tap. This rugged tool is composed of 3 pieces : 1.A taper tap with an upper pin thread. 2.A sk

Compatible with large, readily available, range of jaws Allows for holding of larger components Upto 20% more speed and grip force than conventional chuck Standard Accessories AvailableKitagawa chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. These larger style chucks provide the higher grip forces required for doing large work. B series chucks are supplied with a blank drawnut as standard with a set of T-nuts.

High speed operation Large through bore Kitagawa hydrualic cylinders are made with high grade alloy steel. The F series cylinders are Kitagawa's high speed open centre with the largest kitagawa sizes. The cylinder can be bought as a single unit or to suit a required machine under request.

Cross guide reduces runout and distortion Ideal for irregular shaped components Independent jaws allow for off centre holding Kitagawa chucks are manufactured from high grade alloy steel. The IC series are four jaw independent chucks with front mount holes. IC series chucks are supplied with a set of hard jaws.

Exceptionally long jaw stroke Suitable for multi-diameter gripping Secure gripping on large flange compounets Compatible with large, readily available, range of jawsKitagawa chucks are manufactured from high grade alloy steel. The ML series chucks or mega-long stroke chucks are used for multidiameter gripping and large flange work. ML series chucks are supplied with a blank drawnut as standard with a set of T-nuts.

High Repeatability Ideal for finishing or high precision processes Built-in Pneumatic Cylinder Kitagawa chucks are manufactured from high grade alloy steel. The Kitagawa KPC series are chucks with built-in cylinders, the KPC units have very high repeatability making them ideal for finishing and precision processes.

Compatible with large, readily available, range of jaws Two stage gripping gives clamping and seating of part Base jaws do not protrude on z axis Sealed body designKitagawa chucks are manufactured from high grade alloy steel. The Kitagawa DL Series are the 1st chuck with two stage gipping action, firstly parallel clamping then pull back action for work seating.

Compatible with large, readily available, range of jaws Two stage gripping gives clamping and seating of part Base jaws do not protrude on z axis Sealed body design Kitagawa chucks are manufactured from high grade alloy steel. The Kitagawa DL Series are the 1st chuck with two stage gipping action, firstly parallel clamping then pull back action for work seating.

Compact short body design Increased max operating speed Increased pull force gives larger chuck range Kitagawa hydrualic cylinders are made with high grade alloy steel. The SS series cylinders are compact design to fit on size critical machines while giving a larger pull force to allow for operation of a wide range of chucks. The cylinder can be bought as a single unit or to suit a required machine under request.

Longer piston stroke Large Through Hole Increased max operation speed Kitagawa hydrualic cylinders are made with high grade alloy steel. The S-L series cylinders are Kitagawa's long stroke option for standard range of hydrulic cylinder these cylinder give more options when standard stroke lenghts will not provide full oparation. The cylinder can be bought as a single unit or to suit a required machine under request.

High pull and push force to operate range of chucks Light wieght and compact design Large Through Hole Kitagawa hydrualic cylinders are made with high grade alloy steel. The S series cylinders are Kitagawa's standard range of hydrulic cylinder and are fitted as standard to a wide range of machines. The cylinder can be bought as a single unit or to suit a required machine under request.

Exceptionally long jaw stroke Secure gripping on large flange compounets Suitable for multi-diameter gripping Usefull for gripping irregular shaped componentsKitagawa chucks are manufactured from high grade alloy steel. The Kitagawa MLT series combines the advantages of level style and two jaw chucks, giving a perfect solution to abnormal flange work peices. MLT series chucks are supplied with blank drawnut and a set of t-nuts as standard.

Exceptionally long jaw stroke Suitable for multi-diameter gripping Secure gripping on large flange compounets Compatible with large, readily available, range of jaws Kitagawa chucks are manufactured from high grade alloy steel. The ML series chucks or mega-long stroke chucks are used for multidiameter gripping and large flange work. ML series chucks are supplied with a blank drawnut as standard with a set of T-nuts.

2+2 Independent jaws give contact with all four jaws Long stroke grip compounets with variable size Ideal for square or elliptical parts Compatible with large, readily available, range of jaws Kitagawa chucks are manufactured from high grade alloy steel. The Kitagawa HW series are four jaw chucks but unlike conventional four jaws it works off a 2+2 system clamping two jaws indapendently garentees gripping with all four jaws unlike standard chucks. HW series chucks are supplied with blank drawnut and a set of t-nuts as standard.

2+2 Independent jaws give contact with all four jaws Long stroke grip compounets with variable size Ideal for square or elliptical parts Compatible with large, readily available, range of jaws Kitagawa chucks are manufactured from high grade alloy steel. The Kitagawa HW series are four jaw chucks but unlike conventional four jaws it works off a 2+2 system clamping two jaws indapendently garentees gripping with all four jaws unlike standard chucks. HW series chucks are supplied with blank drawnut and a set of t-nuts as standard.

Larger Bore to Accept Larger Components down the Spindle Compatible with large, readily available, range of jaws Upto 20% more speed and grip force than conventional chuck Industry Standard Large Bore 3 Jaw Chuck Kitagawa's chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. The BB series has a big bore to accept larger components down the Spindle. BB200A series chucks are supplied with a blank drawnut as standard with a set of T-nuts and an adaptor plate.

The Worlds Most Popular Chuck Compatible with large, readily available, range of jaws Upto 20% more speed and grip force than conventional chuck Standard Accessories AvailableKitagawa's chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. These chucks are supplied with a spindle nose adaptor plate. B200A series chucks are supplied with a blank drawnut as standard with a set of T-nuts and an adaptor plate.

The Worlds Most Popular Chuck Compatible with large, readily available, range of jaws Upto 20% more speed and grip force than conventional chuck Standard Accessories AvailableKitagawa chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. B200 series chucks are supplied with a blank drawnut as standard with a set of T-nuts.

Compatible with large, readily available, range of jaws Allows for holding of larger components Upto 20% more speed and grip force than conventional chuck Standard Accessories AvailableKitagawa chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, gripping force and bore size when compared to conventional chucks. These larger style chucks provide the higher grip forces required for doing large work. B-A series chucks are supplied with a blank drawnut as standard with a set of T-nuts and adaptor plate.

High strength and high-alloy structural maraging steel scrap. It is used in production of high pressure equipment, in manufacture of rocket motor casings, heavy-loaded critical parts, aircraft, shafts, casings and other parts, fasteners, gear transmissions of engines for artillery, machine guns and submarines, etc. Chemical composition: Ni 17,7% — 19,00% Cr < 0,1% Cо < 8,5% — 9,5% Mo <4.6% - 5.5% Fe - balance

Scrap and waste of heat-resistant chromium-nickel steels with a high content of chromium and nickel