Hardened - Import export

Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sold in pairs. Note By telescopic slides with full extension, the travel is roughly equal to the installed length, which ensures greater comfort and accessibility. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 80,000 cycles. Not suitable for horizontal mounting. The head height of the fastening screws should not exceed 1.8 mm otherwise there is a risk of collision with other parts of the slide. Advantages Low slide thickness Light running Precise guidance for high lateral stability

Ball element case-hardened steel. Thrust pad ETG 100 steel.

Steel 1.1213. Stainless steel 1.4034. Stainless steel 1.4112. Version Steel, ground. Steel, ground and hardchromed, chrome coating 5 10 µm. Stainless steel, ground. The precision steel shafts are generally inductively surface hardened. Note The surface value obtained during the inductive hardening process guarantees high surface wear resistance. Suitable for shaft supports 21565. On request Lengths up to a max. 4000 mm. Accessory Shaft supports 21565. Drawing reference 1) chamfered

Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 4 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.

0.5mm and Imperial Increments also Available Accurate and Durable Suitable for 1st and 2nd Operation Work Handening ensures Longevity of Collets Available in a wide range of sizes 16C collets offer the user flexibility to do both first and second operation work using the same collet style. These collets are hardened and tempered to ensure flexibility and durability. The sizes below are in 1mm increments but we are able to supply both imperial and 0.5mm increments and even special sizes.

Shape: sheet Material: EN AW-5005 (AlMg1), H14 Type of manufacture: rolled Condition: work-hardened, 1/2 hard Surface finish: Eloxal quality, Alfha1 Standard: EN 573 Dimensions: Thickness (mm): 1.5 - 4 Length (mm): 2,000 - 5,000 Width (mm): 1,000 - 2,000

Shape: sheet Material: EN AW-5083 (AlMg4,5Mn), 3.3547, H111 Type of manufacture: rolled Condition: annealed, slightly work-hardened Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1.5 - 10 Width (mm): 1,000 - 1,500 Length (mm): 2,000 - 3,000

Shape: sheet Material: EN AW-5754 (AlMg3), 3.3535, H111 Type of manufacture: rolled Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 6 Length (mm): 2,000 - 4,000 width (mm): 1,000 - 2,000 Foliation: no foil, protection foil, no paper

Shape: square perforated sheet material: EN AW-1050 (Al99,5), 3.0255 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020503 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 Length (mm): 2,000 Width (mm): 1,000 Hole size: 10 Pitch (hole center measured): 15

Shape: sheet Material: EN AW-5005 (AlMg1), H12 Type of manufacture: rolled Condition: work-hardened, 1/4 hard Surface finish: decorative anodised quality Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Shape: sheet Material: EN AW-5005 (AlMg1) Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: decorative anodised quality Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 3 Length (mm): 2,000 - 5,000 Width (mm): 1,000 - 2,000

Shape: sheet Material: EN AW-5005A (AlMg1), 3.3315, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: anodized 10my silver RAL colour: E6 anodize EV1, no RAL colour Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 3 Width (mm): 1,000 - 1,500 Length (mm): 2,000 - 4,000

Shape: sheet Material: EN AW-1050 (Al99.5), 3.0255, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000 Foliation: no foil, protective foil

Shape: perforated sheet material: EN AW-1050 (Al99,5), 3.0255 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020503 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1.5 Length (mm): 2,500 Width (mm): 1,250 Hole size (mm): 5 Pitch (hole center measured): 8

Shape: sheet Material: EN AW-5005 (AlMg1), 3.3315, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: anodized 20my silver RAL colour: E6 anodize EV1 Foil page(s): one page Standard: EN 573/EN 4858 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 4 Width (mm): 1,000 Length (mm): 2,000

Shape: sheet Material: EN AW-3105 (AlMn0.5Mg0.5), 3.0505, H44 Type of manufacture: rolled Condition: work-hardened, stove-enamelled, 1/2 hard Surface finish: colour coated, powder, MIRAWALL Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 2 Length (mm): 2,000 - 4,000 Width (mm): 1,000- 1,500 RAL colours: DB703, RAL 7016 (Anthracite grey), RAL 8019 (Grey brown), RAL 9006 (White aluminium), RAL 9007 (Grey aluminium), RAL 9010 (Pure white), RAL 9016 (White)

Shape: sheet Material: EN AW-3105 (AlMn0.5Mg0.5), 3.0505 Type of manufacture: rolled Condition: work-hardened, stove-enamelled, 1/2 hard Surface finish: colour-coated, wet paint eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.8 - 1 Length (mm): 2,000 - 3,000 Width (mm): 1,000- 1,500 RAL colours: RAL 7016 (anthracite grey), RAL 8004 (copper brown), RAL 8014 (sepia brown), RAL 9006 (white aluminium), RAL 9010 (pure white), RAL 9016 (white)

Shape: sheet Material: EN AW-3105 (AlMn0.5Mg0.5), 3.0505, H44 Type of manufacture: rolled Condition: work-hardened, stove-enamelled, 1/2 hard Surface finish: colour coated, powder Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 2 Length (mm): 2,000 - 3,000 width (mm): 1,000- 1,500 RAL colours: RAL 9016 (white)

Shape: sheet Material: EN AW-5005 (AlMg1), H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 1 - 4 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000 Factory filming: no film, protective film, no paper

Shape: sheet Material: EN AW-5754 (AlMg3), 3.3535, H22 Type of production: cold-rolled Condition: work-hardened, annealed, 1/4 hard Surface finish: Mill-finish Standard: EN 573/EN 485 eClass 9.1: 35020501 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000 Foliation: no foil, protection foil, no paper

Shape: sheet Material: EN AW-1050 (Al99.5), 3.0255, H14/H24 Type of manufacture: rolled Condition: work-hardened, re-annealed, 1/2 hard Surface texture: Stucco patterned Standard: EN 573/EN 485 eClass 9.1: 35020502 UNSPSC 11.2: 30102506 Dimensions: Thickness (mm): 0.8 - 1 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Quenching und tempering of tool steels primarily for the saw- and knive industry. Many reputable saw- and tool companies are taking advantage of our highly developed heat treatment service which is well known in several countries arround the world.