Floats - Import export

FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2

The Fabric Wrapped Ceiling Panel is formed by hanging the fabriccovered sound absorbing products used in improving the acoustical space horizontally from the ceiling surfaces with the connecting apparatus. Our product range responds to your acoustics and aesthetic needs with powerful sound absorption performance. Acoustic Ceiling Cloud provides a clean appearance with balanced acoustical control. It is preferred to minimize humming in largescale outdoor office environments with floating ceiling panels. Ideal for reducing echoes and reflections in outdoor office environments, lobbies, conference halls, reception halls, museums. In addition to reducing the noise of the floating roof panel, the architectural design can be suspended horizontally in the ceilings to help with your goals.

Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced. Form B: Fasten the floating clamp with M6 fastening holes to a fixture. Adjust the height stop and pivot range using the blue adjusting sleeve and clamp with grub screws (4x AF 2.5). When setting the height limit, allow ample play at the top. For specific clamping situations, the standard jaw plates can be modified or replaced.

The axis height of the spindle bearings matches the fixed bearing unit 2407801. The floating bearing units consist of a housing with deep groove ball bearing, which adapts axially to the linear expansion of the spindle.

The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The floating joint unit is mainly used when: a temperature change alters the dimensions of a component assembly inaccuracies occur manufacturing tolerances must be compensated for the position of the components varies due to dynamic loads

Original floating keychain with EVA body in fun bicolor design and in a wide range of tones. EVA

Nature line floating keyring, made of natural cork, promoting the use of natural materials, helping the sustainability of the planet. With polyester string and metal ring. Cork

oHeterogeneous flooring manufactured in rolls (LINO FATRA®) is designed mainly for residential and commercial buildings, schools, hospitals, and light industry buildings. Luxury vinyl floorings in board form are manufactured (product lines FATRA THERMOFIX® and IMPERIO®), which are used mainly in residential and commercial buildings. oHomogeneous flooring (LINO FATRA®) is supplied in panels with their design may include special conductive features. They are used mainly in operating theatres, laboratories, and computer classrooms. oFloating vinyl floor (product lines FATRA RS-CLICK and FATRACLICK®) is supplied as boards with the patented Uniclic® system and designed mainly for residential buildings and family houses.

Model SPABP2150 Full floating cap INOX 316L Swivel stem Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910 mm>

304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

304 stainless steel tank Model SPABP2800 Full floating cap INOX 316L Swivel stem with stainless steel handle Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Stem Diameter 1200 mm Height (without stem) 2900 mm Total height (with stem) 3410 mm

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304L stainless steel tank Model SPABP700 With pneumatic system On welded feet Effective capacity 696 liters Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system on welded feet Model SPABP500 Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet

304 stainless steel tank SPA700 model Pneumatic system Capacity 696 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

Float clear glass, from 3.0 to 6.0 mm for construction, interior decoration and double-glazed windows.

Float clear glass, from 8.0 to 12.0 mm for construction, interior decoration and safety.

The centrifugal concentrators a various productivity with a floating bed are designed for high-quality gravity concentration of fine-grained material (alluvial sands and crushed ores) containing free gold, silver and platinum, in the industrial extraction of fine and fine fractions of noble metals and other heavy valuable minerals.

Centrifugal Concentrator with floating bed model 110 is designed for high-quality gravity concentration of fine material (sand and alluvial deposits of crushed ore) containing free gold, silver and platinum, in the industrial extraction of small and fine fractions of precious metals and other heavy valuable minerals. Performance on hard, kg / h: - 200. Gold recovery of size, % +50 microns 96- 99 + 10-50 microns 92-96 + 3-10 microns, 50-92

This floating fountain is easy to install and does not require construction works. Its compact size makes it easy to install in a pond - just connect the device to the control panel. The fountain provides aeration of the water, prevents the growth of algae. Additional options (such as lighting) are not included in the set. They can be ordered separately. The fountain is equipped with a valve that allows you to change the jets heights manually. In order to automatically change the jets heights, the fountain can be connected to a frequency converter (additional option). Automatic switching on and off of the fountain and lighting (not included) is performed by the Siemens controller. Equipment: 1. Floating module made of stainless steel 2. Pump in a stainless steel filter casing 3. Fountain nozzle 4. 8 pins for fixing the lighting fixtures 5. Underwater cable - 50 m. 6. 4 concrete anchors in a polymer sheath, rope, carabiners. 7. Weatherproof fountain control cabinet, IP66.