Fan motors - Import export

iglidur® L250: For fast rotations Bearings for fast rotary motions like, for instance, in fans and small motors. iglidur® L250 is available as cylindrical bearings and plain bearings with flange. specially developed for fast rotating applications Very low coefficients of friction Excellent wear resistance

Electric Impulse Tool with Torque Control and Angle Monitoring. The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. The angle sensor is an extremely compact (PAT) rotary encoder that detects both angle as well as direction by 1 degree, signal transmission contactless. Due to the newly developed outer rotor servo motor and the composite body, the Yokota system e-wrench has the lightest weight in its class. For cooling of the motor it is equipped with a fan that reduces motor size (and weight at the same time). For cooling of the impulse unit it is equipped with a separate fan. [...

This cutting and machining center has an automatic feeding table for 10 profiles, which allows maximum efficiency and effectiveness in the processing of cutting lists, saving time and maximizing production. The cutting unit has a 550 mm diameter disc which works at any angle between 30º and 150º, offering a wide range of positions for the cutting disc. Uses: cutting, milling, drilling the water drainage channel and working with PVC and aluminum profiles alike. Designed to achieve the greatest efficiency in less time. Capable of performing 15 different operations with 13 fan-cooled spindle motors, a triple arm opening motor and a disc motor. It offers unlimited processing possibilities on all 4 sides of the profile. PRODUCT DETAILS AXLE DISTANCE X axis (longitudinal) min 270 mm / max 3000 mm. Y axis (Horizontal) min 30 mm / max 150 mm. Z axis (Vestical) min 30 mm / max 180 mm. SR axis (Drive Robot) min 1200 mm / max 6500 mm.

To get the maximum performance with minimum energy and management consumption, it is important that your cooler is always maintained at maximum efficiency. Checking the general condition of the main parts (in the case of an evaporative cooling tower: fill pack, motor fan unit, distribution, etc.), allows to maintain the functionality over time. For this purpose MITA offers a wide range of spare parts, solutions to restore and ensure the initial efficiency. Some advantages of spare parts for cooling towers and other cooling technologies. - Set of original spare parts for the first 5 years of operation: at an attractive price. - Certainty of immediate availability for original spare parts. - Spare parts corresponding to the original on request. You can also ask MITA Service for maintenance work on evaporative towers, evaporative condensers, adiabatic coolers and chillers of any brand.

SKF LGMT 2 is a with lithium thickened grease on a mineral oil base. It is characterized by excellent thermal stability within its operating temperature range. This high-quality universal grease is suitable for a variety of applications in industry and the automotive sector. Excellent oxidation stability Good mechanic stability Application examples Automative wheel bearings Conveyors and fans Small electric motors

Axial fans are a type of fan that creates airflow through a fan wheel that rotates around an axis and moves the air parallel to the axis. Axial fans can also be called propeller fans and are usually delivered as a complete unit consisting of fan wheel, motor and cover. Typically axial fans are direct driven with the impeller mounted on the motor shaft. There are also other designs such as e.g. belt-driven or with shaft bearing and coupling. The axial fan’s strength is to transport large volume flows at low pressures. At higher pressures, a centrifugal fan may be a better choice. To reach higher pressures with axial fans, these can be connected in series. Usually, the efficiency of an axial fan is comparatively lower than that of a centrifugal fan. But by using guide rails, diffusers and other accessories, an axial fan can reach the same or higher efficiency. The flow of axial fans can be regulated with vane or damper or speed regulation.

Radial fans or centrifugal fans are a type of fan that uses centrifugal force to create a pressure increase and a volume flow. This type consists of a fan wheel that rotates in a snail-shaped cover. The flow enters the fan through an inlet placed axially with the fan wheel shaft and motor, and is then thrown out radially with the help of the force from the fan wheel. Unlike axial fans, the motor is not in the volume flow of radial fans. To change the performance and characteristics of centrifugal fans, different designs are used on the fan wheel. The strength of the centrifugal fan is its versatility. A radial fan can be designed to transport a variety of volume flows at a wide range of pressures. At higher flows and relatively low pressures, an axial fan may be a better option. Centrifugal fans are available in single and double suction versions.

An Impulse fans (Jet fan) ísa a type of axial fan that is adapted for operation in tunnel environments by e.g. material selection and silencer. The tunnel fans create airflow through a fan wheel that rotates and moves the air axially. They are usually delivered as a complete unit consisting of fan wheel, motor, cover, silencer and mounting stand. The flow of tunnel fans can be regulated with a frequency converter. In order to choose the right impulse fan for tunnel ventilation, one should start from operating data, tunnel design and whether there are any special requirements.

Sometimes spare parts are not enough and the entire fan (with or without motor) needs to be replaced. We can help you with all your existing fans. To make the exchange as accurate as possible, we want as much information as possible about e.g. operational data and media. A good start is usually to use the rating plate on your existing fan.

Slitter and Rewinder for ATM paper rolls Manufacturer : Officina Meccanica Maglio S.p.A., (OMM) Italy Manufacturing year : unknown Consisting of: - Automatic core loader, - Hydraulic lifting of main web - Electronic cycle counter - Packing line (manual) Material to be handled - ATM paper rolls Technical data (Unwinder) Minimum web width : 460 mm Maximum web width : 1050 mm Maximum diameter : 1100 mm Core diameter : 70 / 76 mm Minimum slitting width : 17.4 mm (*15.0 mm with knife holders with 10mm thickness) Maximum slitting width : 250.0 mm (Rewinder) Maximum diameter : 300 mm Core diameter : Min. 11.5mm, max. 76mm - Automatic warning stripe at reel ends - Trim removal system for removing trim from both sides of the web, complete with motor fan and necessary piping - Pressing function to make reel ends flat - Packing machine *All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales.