Electronic equipment - Import export

As part of our maintenance and repair services, we also perform technical upgrading and modernisation operations on existing electrical equipment.

MyIon is an innovative, wearable air sterilizer which uses advanced air ionizing technology to eliminate all harmful airborne particles: - PM 2.5, dust, allergens and viruses. "For people to be and stay healthy, they must breathe clean air from their first breath to their last" Dr Flavia Bustreo, Assistant Director General at World Health Organisation

Our medical light technology is based on Nobel Prize winning technology, and is fully medically certified. B2 is non-invasive, accelerates healing and treats a wide range of conditions, including: acne, skin wounds, sports injuries, anti-aging, arthritic and low back pain. 5 to 10 minutes of treatment with BIOPTRON, twice a day, is all one needs for accelerated healing. Health professionals choose BIOPTRON 2 because of its larger 15cm filter diameter, angled shape and easy to use.

Our medical light technology is based on Nobel Prize winning technology, and is fully certified for non-invasive, accelerated healing and medical prevention of a wide range of conditions including: acne, skin wounds, sports injuries, anti-aging, arthritic and low back pain. Just 5 to 10 minutes of treatment with BIOPTRON twice a day is all that is needed for accelerated healing. BIOPTRON Pro 1 has a filter diameter of 11cm and is designed for use at home, in hospitals and in therapeutic centers.

Our breakthrough medical light device is based on Nobel Prize winning technology, and is fully certified for non-invasive, accelerated healing and medical prevention of a remarkable range of conditions, including: acne, skin wounds, sports injuries, anti-aging, arthritic and low back pain. 5 to 10 minutes exposure to BIOPTRON Medical light, twice a day, is all that is needed for accelerated healing.

Therapy Air® Smart is the latest generation of the most effective air purification systems that combines proven HEPA technology with the power of negative Ions and UV-C light. This all-in-one filtration system removes 99.9% of harmful particulates, pathogens and polluting gasses from air.

Humans on average breathe over 11,000 litres of air each day. We spend 90 per cent of our time indoors; be it in our homes, places of work, schools, or health and fitness centres, where the levels of pollutants and allergens can be 100 times higher than already dangerously polluted outdoor air. Breathing polluted air makes us sick and is a root cause of many fatal diseases. TherapyAir iOn is a sophisticated and highly effective air purification and ionization system that removes 99.99% of airborne particulates. Purified 99.99% therapy air free from viruses, bacteria and toxic substances is a must have in every indoor space for well-health and is the only real and healthy investment for homes, offices, schools and kindergartens, sport and recreation centers, hospitality retreats – all indoor spaces. Therapy Air was voted best high-end air purifier on the market by independent Experten Testen (Germany 2016 and 2020).

For precision tightening of fine screws (M1-M2). Tohnichi's BMLD series torque screwdriver is designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Like BMRD but with a click signal instead of the slip clutch. Ideal for applications that are sensitive to vibration and where rotary clutch vibrations might be problematic. Key Features: Accuracy acc. EN ISO 6789 type II class D Micrometer adjustable Clockwise direction Click signal Calibration Certificate (ISO/JIS) [...]

For precision tightening of fine screws (M1-M2). Tohnichi's AMLD series torque screwdriver is especially designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Like AMRD, but with a click signal instead of the slip clutch. Ideal for applications that are sensitive to vibration and where rotary clutch vibrations might be problematic. Key Features: Accuracy and calibration compliant to EN ISO 6789 type II class D Micrometer adjustable Click-type Clockwise direction Certificate (ISO/JIS) [...]

Adjustable Torque Screwdriver for Small Screws (M1-M2) Tohnichi's BMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in bzw. ozf·in).

Tohnichi's AMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in, ozf·in).

Sensitive electrical or electronic equipment, components and devices (ESD sensitive elements) may be damaged or destroyed by electrostatic discharges (ESD) in the immediate vicinity. Electrostatic discharges can come from people or through handling ESD sensitive components (e.g. during production, assembly, transport, storage etc). Electrically conductive products which conform to DIN EN 61340-5-1 are essential within electronic environments to prevent an electrostatic discharge. These products can be used for ESD applications or in ESD protection areas (EPA) in accordance with DIN EN 61340-5-1. Safety: These ESD products can also be used for devices, components and protection systems in areas with high risk of explosion. Use of these ESD products prevents the occurrence of electrostatic spark discharges, eliminating the potential ignition of gases and dusts which could lead to explosions in enclosed spaces.

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

Processes: TIG Pulse – TIG DC HF – MMA Materials: Carbon and stainless steel Applications: Metal carpentry – Boilerwork – Maintenance – Repair – Bodywork

Manufacturer and supplier of steel beams

Electronic automated arc spray equipment of all metal wires - electronic control and management

OB500 medical suction unit equipped with autoclavable collection jar OB-J FA 1000 ml with overflow valve and protective filter inserted directly in the lid, autoclavable max 30 cycles The device is designed for medical vehicles and is stationary, not portable Nominal suction power: 800 mbar (80 kPa) ±10% Nominal suction flow: 30 LPM at free air speed ±10% Maximum operating time (free-cycle): 60 minutes ±10% Degree of protection against infiltration of liquids and solids: IP32d Functioning: 12÷15 Vdc Maintenance-free piston pump Vacuum control and regulation unit with ABS module Dimensions of suction unit: 175x175x100 mm Dimensions of ABS module adjustment unit: 90x130x85 mm Weight: max. 2 kg including mounting parts Class IIa medical device in compliance with Regulation (EU) 2017/745 (MDR), all applicable regulations and main reference standards

Functional, capacious, resistant and compact emergency bag Made of tearproof and impermeable red fabric material 4 refractive straps Totally removable cover Easy to carry either by hand, on shoulder or as a backpack 2 external lateral pockets 3 external lateral pockets with elastics and additional pockets 5 inner modular spaces 2 inner removable pouches with transparent frontal Dimensions: about 63x37x31(h) cm Weight: about 2,3 kg

PROFI vacuum mattress, made of high-strength fabric, intended for the immobilisation and transport of polytrauma patients The mattress includes a semi-rigid support in which 8 handles for lifting and transport are located Suction valve located close to the head on the outer side, easily accessible even with immobilized patient Equipped with 3 immobilisation straps Radio-transparent Equipped with 3 internal suction chambers for better adaptation to the anatomical shape of the patient Dimensions: 205x95x10h cm Weight: 10 kg In compliance with the standard EN 1865-1 It is a CE medical device in compliance with the European Regulation MDR 2017/745

High performance mechanical exchanger with lateral or rear inlets/outlets (prepared by the manufacturer) Accommodates the pressure gauge inside the exchange knob for pressures up to 15 bar (1500 kPa) Thanks to the special construction, the pressure gauge is protected against accidental mechanical shocks and impacts The pressure gauge fitted inside the exchanger allows the size of the oxygen bar to be reduced 3/8" inlet and outlet connections perfectly compatible with oxygen hoses manufactured by Boscarol Allows a pressure transducer to be fitted on the outlet for measuring the nominal pressure of the kit The exchanger does not include any plate for flush mounting in the ambulance The Boscarol cylinder exchanger is part of the parts that make up the oxygen kit and should be considered as a spare part

High performance mechanical exchanger with lateral or rear inlets/outlets (prepared by the manufacturer) Accommodates the pressure gauge inside the exchange knob for pressures up to 15 bar (1500 kPa) Thanks to the special construction, the pressure gauge is protected against accidental mechanical shocks and impacts The pressure gauge fitted inside the exchanger allows the size of the oxygen bar to be reduced 3/8" inlet and outlet connections perfectly compatible with oxygen hoses manufactured by Boscarol Allows a pressure transducer to be fitted on the outlet for measuring the nominal pressure of the kit The exchanger includes amounting plate for flush mounting in the ambulance. The plate is made of stainless steel and can be painted according to customer requirements The Boscarol cylinder exchanger is part of the oxygen kit and should be considered as a spare part

Medication pouch designed for companies or manufacturing units of group C (not classified as high risk), hence with less than three workers. Content according to DM 388/2003 attachment 2 and D.L. 81/2008 art.45 and D.P.P. 25/2005, Regulation on first aid provisions in companies of the Autonomous Province of Bolzano, which supplements the minimum content required by the national decree. Article 2 of M.D. 388/2003 establishes that the content in Annex 2 must be provided to workers who work in locations other than the company headquarters or production unit. Complete with: 2 pairs of disposable sterile gloves; 125 ml of cutaneous Povidone Iodine with 10% iodine; 250 ml of saline solution (sodium chloride – 0,9%); 3 packages of sterile gauzes 10 x 10 cm – single packaging; 1 packages of sterile gauzes 18 x 40 cm – single packaging; 1 disposable sterile medical forceps; 1 package of hydrophilic cotton; 1 package of various sized plasters ready-to-use; 1 roll of high plaster 2,5 cm;

Medication locker designed for companies or manufacturing units of group A and B and in any case with three or more workers. Content according to DM 388/2003 annex 1 and D.L. 81/2008 art.45 and D.P.P. 25/2005, Regulation on first aid provisions in companies of the Autonomous Province of Bolzano, which supplements the minimum content required by the national decree. For group A companies, the content provided for in annex 1 is to be integrated on the basis of the risks present in the workplace. complete with: 5 pairs of disposable sterile gloves; 1 anti-squirt visor; 1 litre of cutaneous Povidone Iodine with 10% iodine for professional use; 1.5 litre of saline solution (sodium chloride – 0,9%); 10 packages of sterile gauzes 10 x 10 cm – single packaging; 2 packages of sterile gauzes 18 x 40 cm – single packaging; 2 disposable sterile sheets; 2 disposable sterile medical forceps; 1 medium-sized elastic bandage; 1 package of hydrophilic cotton;

Medication package designed for companies or manufacturing units of group C (not classified as high risk), hence with less than three workers. Content according to DM 388/2003 attachment 2 and D.L. 81/2008 art.45 and D.P.P. 25/2005, Regulation on first aid provisions in companies of the Autonomous Province of Bolzano, which supplements the minimum content required by the national decree. Article 2 of M.D. 388/2003 establishes that the content in Annex 2 must be provided to workers who work in locations other than the company headquarters or production unit. Complete with: 2 pairs of disposable sterile gloves; 125 ml of cutaneous Povidone Iodine with 10% iodine; 250 ml of saline solution (sodium chloride – 0,9%); 3 packages of sterile gauzes 10 x 10 cm – single packaging; 1 packages of sterile gauzes 18 x 40 cm – single packaging; 1 disposable sterile medical forceps; 1 package of hydrophilic cotton;

Medication package designed for companies or manufacturing units of group A and B and in any case with three or more workers. Content according to DM 388/2003 annex 1 and D.L. 81/2008 art.45 and D.P.P. 25/2005, Regulation on first aid provisions in companies of the Autonomous Province of Bolzano, which supplements the minimum content required by the national decree. For group A companies, the content provided for in annex 1 is to be integrated on the basis of the risks present in the workplace. complete with: 5 pairs of disposable sterile gloves; 1 anti-squirt visor; 1 litre of cutaneous Povidone Iodine with 10% iodine for professional use; 1.5 litre of saline solution (sodium chloride – 0,9%); 10 packages of sterile gauzes 10 x 10 cm – single packaging; 2 packages of sterile gauzes 18 x 40 cm – single packaging; 2 disposable sterile sheets; 2 disposable sterile medical forceps; 1 medium-sized elastic bandage; 1 package of hydrophilic cotton;

First Aid Kit for motorbikes with content according to DIN 13167: 1 x roll of adhesive plaster, DIN 13019-A (5 m x 2,5 cm) 14-piece adhesive dressing assortment, DIN 13019: 4 x wound dressings, DIN 13019-E (10 cm x 6 cm) 2 x fingertip dressings 2 x finger bandages 12 cm x 2 cm 2 x plasters 1,9 cm x 7,2 cm 4 x plasters 2,5 cm x 7,2 cm 1 x first aid dressing, sterile, DIM 13151-M 1 x first aid dressing, sterile, DIM 13151-G 1 x burn dressing, sterile, DIN 13152-A (60 cm x 80 cm) 1 x rescue blanket, gold/silver (210 cm x 160 cm) 1 x bandage scissors, DIN 58 279-A 145 2 x pairs of disposable gloves (large), DIN EN 455 2 x wet cleansing wipes for unwounded skin 1 x first aid instructions 1 x list of contents

Red nylon handbag. Content complies with what stated by norm DIN 13164 (mandatory on automotive vehicles in certain European Nations). Content: 8 adhesive bandages 10x6cm Plaster roll 5m x 2,5cm 2 gauze bandages 6cm x 4m 3 gauze bandages 8cm x 4m 1 pair of bandage-cutting scissors Package of 4 vinyl gloves Non-woven fabric sheet 60x80cm 2 non-woven fabric sterile sheets 60x40cm 3 sterile swab bandages 80x100mm Sterile swab bandage 100x120mm 6 non-woven fabric sterile swabs 10x10cm 2 non-woven fabric triangular sheets 96x96x136cm Isothermal blanket First-aid instructions Dimensions: 25x15x7,5 cm. Weight: 0,45 kg.

Travel first aid kit complete with all the necessary to give assistance to minor seriously wounded patients. Particularly suitable for travel, due to reduced weight and dimensions. Tear-proof and water resistant red bag, with transparent front equipped with velcro straps, featuring: 2 small bags for minor burns treatment 2 2-pieces non-woven sterile compress 1 medicated plaster strip 2 glove pairs in non-sterile package 3 disinfectant tissues 1 nylon non sterile tweezers 1 cohesive elastic bandage 4 cm 1 first aid scissors 2 ammonia towels 1 suture plasters package 1 disposable standard instant ice 1 package of 40 plasters Dimensions: about 15x12x8,5 cm

Complete first aid and medication kit, suitable for sport activities but also for home care use. In compliance with DIN 13167 motorbike norm (compulsory for Austria and Germany). Featuring: Isothermic blanket 3,5 ml Idrogel sachet 2 sterile non woven compresses Sterile medication cloth 60x80 cm 2 Alumed medication pack size M Transparent plaster roll 2,5 cm Cotton medicated plaster 10x6 cm 2 pairs of gloves in non-sterile package 2 disinfectant wipes Small first aid scissors Nylon sterile tweezer Life saver Ammonia 4%wipe First aid instructions Dimensions: about 15x12x8,5 cm Weight: about 200 gm