Electronic controllers - Import export

Hybrid Technology – Smart Assembly Solutions The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. During the tightening process, four different variables are measured and monitored: Torque - Angle - Time - Nº. of Impulses. Torque transducer measures directly and transmits the signals contactless. Detects cross threads, double hits, contamination, etc. Special feature to prevent cross threaded tightening: reversely rotating a bolt to a preset angle at the start of tightening. Combinations of buzzers and LED (Green / Red) for operator feedback on OK / NOK tightenings. [...]

The Yokota YZ-T cordless impulse wrench is detecting the amplitude of the tightening force from motor loaded condition. Based on the programmed values, the YZ-T wrench makes self-shut-off intelligently. As a result, the YZ-T achieves highest torque accuracy and safety against misconnections. An integrated status LED is visible virtually all around. The YZ-T series provides a rugged impact-resistant housing. Its pulse cell works without a mechanical shut-off mechanism and is easy to maintain. The optimized design allows extended maintenance intervals. The grip fits well in the hand and the tool is perfectly balanced. Intelligent Shut-Off. The combination of the adjustment of the pressure relief valve and the speed setting of the motor allows an optimal adaptation to the respective bolt joint to be connected. Thus the electronically controlled shut-off effects precisely and stable according to the entered parameters for smallest torque tolerances. [...]

The auger feeder series enables the volumetric dosing of powdery products with fine granulation, which can sometimes present problems of compactness, dust content and variable density, such as cocoa, curry and other "powdery" products. The various problems associated with processing the products are solved, starting with feeding the product through a hermetically sealed hopper equipped with a level sensor and a motorised agitator. The screw, made from a single solid mass, has an electronically controlled speed by means of a servo motor, which allows the use of acceleration and deceleration ramps that ensure an immediate screw stop, thus guaranteeing optimum dosing accuracy.

Compact design and reduced dimensions: a range of evaporative cooling towers with centrifugal fans for special space configurations. MCT-EC version available with electronically controlled fans.

Compact, efficient and easily accessible: MCE industrial condenser ensures refrigeration operators all the operating standards of its own technology class. The typical MITA evaporative coolers’ durability over time is a plus. MCE-EC version available with electronically controlled fans.

Some industries need to keep the chemical-physical characteristics of the process fluids unchanged: in these cases, MCC closed-circuit evaporative cooling tower joins the game. Possibility to work in free-cooling mode. MCC-EC version available with electronically controlled fans.

The automatic single-head cappers are designed to apply aluminum caps or screw-on and snap-on plastic caps to glass or PET bottles. All closure heads are made entirely of stainless steel, as well as most of the machine components. The speed variation is electronic, controlled by an inverter. Other capping systems are available to meet different needs: cork, crown, twist-off. It is also possible to combine 2 turrets on the same machine with different combinations, for example, screw cap + cork, cork + crown, screw cap + T-cork. The range of single-head cappers is designed for productions of up to approximately 2,500 bottles per hour and can be integrated with automatic cap feeding systems of both mechanical and pneumatic types.

Isobaric filler for beer and other carbonated products, equipped with 5 filling valves and a bottle selection and transfer system using large-diameter stars. The filling valves are made of stainless steel with heat-sanitizable gaskets. The filling cycle is fully automatic, with an initial valve opening for counter-pressure, full opening for bottle filling, and decompression (degassing). The different phases and processing times are controlled by an electronic controller (PLC), with adjustments available through a touch-screen operator panel. An automatic capper is included for pry-off crown caps with a diameter of 26mm, with automatic cap distribution using a stainless steel hopper. The machine features a central 10-compartment star and bottle guide made of high-density polyethylene, with a safety microswitch. The machine's base is made of AISI 304 stainless steel. The indicative filling capacity with 0.33L bottles is approximately 700 bottles per hour.

REVO PB allows you to reduce the costs of electricity in industrial thermal processes. REVO PB is able to optimize your industrial electric heating systems and make your production processes more flexible. With traditional heating systems based on resistors and multi-zone power controllers, when you turn on the load you have a great impact on the peak absorption and when you modulate the load to keep the temperature constant you introduce a lot of disturbances into the electrical network. This leads to possible malfunctions of the electronic control and penal systems by the energy supplier. REVO PB power controllers are among the latest in the REVO family expanding REVO PN Family up to 90 A per channel. This is the ideal unit in cases where it is necessary to control and optimize the power. Its optimization algorithm, like an orchestra conductor, distributes the required power of the individual zones while keeping the total power absorbed on the line as constant as possible.

Electronic automated arc spray equipment of all metal wires - electronic control and management

You can also find products made by Enbi Plastics in the cars of for instance Mercedes, BMW and Audi! One example of this is the lift bar, which connects car windows to their electronic controls. In the past, they drilled holes in the glass to do this, but that is not possible with today’s layered, safer glass. That is why a dimensionally stable part that could form a solid connection between the window and the technology was needed. Our client glues the lift bars to the car windows using putty. Enbi Plastics prepares the part: we use an activator and primer. This is done in a fully climate controlled room. After production, we conduct rapid aging tests: By applying water to the parts and exposing them to a certain temperature for five days, we can check if the putty continues to stick. That way, we ensure optimal reliability. We continually make this product, constantly maintaining the right stock levels for the client.

Electronic speed controller Reversing switch Threephase 400 V On trolley With bypass

TECHNICAL SPECIFICATIONS - Closed tank 29 500 L D.2800 Automatic punching down - Speidel Type and Ref : FDMTTK280F29500 - Automatic decanter with external cylinder, Döme - Reinforced, 316 L stainless steel, 304 stainless steel shell and base - Off-centre upper hatch D. 400 mm - Decanting door 530 x 400 mm - Height under door approx. 580 mm - Tasting tap DIN 20 - Tapping for temperature measurement with - Needle thermometer and gang finger - Stainless steel ladder support, stainless steel lifting rings - External finish: corked - 3D "mirror-polished" interior finish - Tapping system : - 220 V/50 Hz electronic control - Stainless steel tapping arm - 6 bar working pressure, dry air - Pneumatic cylinder flanged to the dome

Repairing your PLC, HMI, CNC, PCB, Servo Motor, Inverter, Drive, Robot or other parts with Radwell can save up to 60% against buying new. With FREE Repair Collection, a 2 Year Warranty on the entire unit and our Price Promise we won't be beaten on price. Radwell's power to repair is second to none! Call 01782 576800 for a Quote.

Our inventory offers a massive 14 million used automation and electronic control parts from over 20,000 manufacturers and you can save up to 90% on buying new. All parts come with a standard 2 year warranty.

Our inventory offers a massive 9 million factory new automation and electronic control parts from over 20,000 manufacturers and you can save up to 15%. All parts come with a standard 2 year warranty.

Radwell will beat any like for like Automation and Electronic Control Equipment Repair quote by 10%

The cable- and tube rewinder is a desktop device and serves as rewinder from cables and tubes to an outside diameter of 18 mm. For variable adjustable thorns possible make a rolling up of tubes and cablerings with an inside diameter of 140 - 400 mm. The equipment is served by a foot pedal and had a speed governor. The electronic control has a resetable overload protection, as well as an emergency stop switch. The direction of rotation can be switched to left or to right.