Drawn steels - Import export

Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 8-7 mm

Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 8-6 mm

Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 8-5 mm

Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 6-4 mm

Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 5-3 mm

turbine shaft manufactured by CNC turning material: cold drawn 18-8 (303) stainless steel, surface finish: passivation hex bar incircle diameter 5.556 +0.000/-0.060 mm internal thread: 8-32 UNC 2B, on both ends 2 grooves, width: 0.64 +0.10/-0.00 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high dynamic stresses. Also for wire shapes that require severe bending. According to EN 10270-1 and ASTM A 227

APPLICATION OF HARD DRAWN STEEL WIRE Compression springs, extension springs,and torsion springs for high and dynamic stresses. According to DIN 17223:1964-1

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression and torsion springs that are mainly submitted to high static strains and to medium levels of dynamic strains. EN 10270-1 ASTM A 228

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to high static stresses or moderately dynamic stresses.

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high static stresses or, rarely, dynamic stresses.

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are chiefly subjected to low static stress. According to EN 10270-1 and ASTM A 227

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Enclosed, 4-hole mount chokes (some models also available epoxy potted in a black powder paint - drawn steel housing. Potted models mount with 1/4" - 20 hardware (included). • Tolerance of 15% on both inductance and resistance. • Inductances measured at rated D.C. current. • Minimum 8" long leads. • Units will exhibit less inductance at slightly higher currents or more at lower currents. • Perfect for high voltage power supply filtering, case matches power transformers and tube audio output transformers. • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation. • Operating temperature range is -40C to 85C. • Proper Henry testing requires an LCR meter in junction with a 25A power supply that does allow for DC bias as well a higher applied AC drive voltage to meet the test specifications.

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware. • Includes wire leads (minimum length of 4"). • Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz. • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. (except 841A, 842A and 844A which are +20 dbm) with specified characteristics, or higher levels with reduced low frequency performance. • Electrostatic shield between prim. and sec. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching. • Overall dimensions 1.75" (44.5mm) wide x 1.25" (31.8mm) deep x 2.56" (65mm) high max. • Shipping weight 0.5 lbs (0.2 kg).

Product Features: • A perfect match to the 1650P Series Potted Output transformers. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Mounting hardware included. • Primary: Universal - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Finish: Black powder paint to match the 1650P Series of potted output transformers. • Units can be run full wave bridge or full wave C.T. • c UL us recognized (E207860).

Shape: round Material: 1.4571 (X6CrNiMoTi17-12-2) Type of production: cold drawn Surface finish: bright Standard: EN 10088 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 3 - 100 Length (mm): 3,000 - 6,000

Shape: flat Material: S235JRC (1.0122) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010301 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 2 - 80 Length (mm): 3,000 - 6,000 Width (mm): 10 - 300