Results for
STAPPERT INTRAMET SA
Belgium
Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 8-7 mm
Request for a quoteSTAPPERT INTRAMET SA
Belgium
Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 8-6 mm
Request for a quoteSTAPPERT INTRAMET SA
Belgium
Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 8-5 mm
Request for a quoteSTAPPERT INTRAMET SA
Belgium
Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 6-4 mm
Request for a quoteSTAPPERT INTRAMET SA
Belgium
Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 5-3 mm
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
turbine shaft manufactured by CNC turning material: cold drawn 18-8 (303) stainless steel, surface finish: passivation hex bar incircle diameter 5.556 +0.000/-0.060 mm internal thread: 8-32 UNC 2B, on both ends 2 grooves, width: 0.64 +0.10/-0.00 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high dynamic stresses. Also for wire shapes that require severe bending. According to EN 10270-1 and ASTM A 227
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Compression springs, extension springs,and torsion springs for high and dynamic stresses. According to DIN 17223:1964-1
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression and torsion springs that are mainly submitted to high static strains and to medium levels of dynamic strains. EN 10270-1 ASTM A 228
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to high static stresses or moderately dynamic stresses.
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high static stresses or, rarely, dynamic stresses.
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are chiefly subjected to low static stress. According to EN 10270-1 and ASTM A 227
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Enclosed, 4-hole mount chokes (some models also available epoxy potted in a black powder paint - drawn steel housing. Potted models mount with 1/4" - 20 hardware (included). • Tolerance of 15% on both inductance and resistance. • Inductances measured at rated D.C. current. • Minimum 8" long leads. • Units will exhibit less inductance at slightly higher currents or more at lower currents. • Perfect for high voltage power supply filtering, case matches power transformers and tube audio output transformers. • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation. • Operating temperature range is -40C to 85C. • Proper Henry testing requires an LCR meter in junction with a 25A power supply that does allow for DC bias as well a higher applied AC drive voltage to meet the test specifications.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware. • Includes wire leads (minimum length of 4"). • Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz. • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. (except 841A, 842A and 844A which are +20 dbm) with specified characteristics, or higher levels with reduced low frequency performance. • Electrostatic shield between prim. and sec. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching. • Overall dimensions 1.75" (44.5mm) wide x 1.25" (31.8mm) deep x 2.56" (65mm) high max. • Shipping weight 0.5 lbs (0.2 kg).
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • A perfect match to the 1650P Series Potted Output transformers. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Mounting hardware included. • Primary: Universal - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. • Bias Tap: 50 VAC tap from high voltage secondary C.T. • Highpot tested: 2,000 VAC. • Faraday Copper Primary Shield: The electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell). • Windings: Concentric wound for low stray field and low noise. • Finish: Black powder paint to match the 1650P Series of potted output transformers. • Units can be run full wave bridge or full wave C.T. • c UL us recognized (E207860).
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: round Material: 1.4571 (X6CrNiMoTi17-12-2) Type of production: cold drawn Surface finish: bright Standard: EN 10088 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102405 Dimensions: Diameter (mm): 3 - 100 Length (mm): 3,000 - 6,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: flat Material: S235JRC (1.0122) Type of production: cold drawn Surface finish: mill-finish Condition: untreated Standard: EN 10277/EN 10278 Tolerance: h11 eClass 9.1: 35010301 UNSPSC 11.2: 30102404 Dimensions: Thickness (mm): 2 - 80 Length (mm): 3,000 - 6,000 Width (mm): 10 - 300
Request for a quoteResults for
Drawn steel - Import exportNumber of results
62 ProductsCompany type