Down - Import export

Special features press fit Both sides axially mounted Tolerance compensation of the sheet thickness Easy installation Axially prestressed Special option possible MKM Double flange bearing d1 [mm]: Special features press fit Both sides axially mounted Tolerance compensation of the sheet thickness Easy installation Axially prestressed Special option possible Press in, flange, finished: loss secure, axially mounted When to use it? When a flanged bearing is needed When the housing bore is more than 4 mm long When the axial safety is not ensured by press fit When a two-side flange is required as a thrust surface When not to use it? When maximum compressive strengths are required iglidur® G When a simple press-in bearing is needed iglidur® M250 When a clip-on sheet metal feedthrough is sought iglidur® G MKM Double flange bearing d1 [mm]:

The pneumatic hold-down clamp is suitable for clamping workpieces from above. This clamp is operated with standard pressure compressed air. The large swivel angle of the clamping arm makes it easy to insert and remove the workpieces without any obstructions, guaranteeing optimum accessibility to the workpiece. The block design of the housing offers universal fastening possibilities, which means that the clamp can be optimally adapted to the workpiece being clamped. Self-aligning pads with a smooth or serrated faces can be fitted in the clamping arm, enabling rough or machined workpieces to be clamped. These pneumatic clamps can be placed in multiple positions on the workpiece and operated in any particular order. They can be controlled manually or automatically. As these clamps are pneumatically actuated, they relieve the operator, particularly where frequent clamping processes are carried out.

Stainless steel retractable grips with marginal installation depth. For base and mounting plates or drawers. With return spring. The grip automatically swivels back into its resting position after use.

Barrel locks with return spring can be easily screwed onto doors, hatches and hoods. These locks are available in two different variants: bevelled upward or bevelled downward. The bevelled surface allows the application to be closed or opened without actuating the grip. The integrated return spring always brings the grip back to its original position. Type of operation: When the grip is pushed, the barrel moves into the open position and the door can be opened. When the door is pushed to, it is locked automatically by the bevel.

Product Features: • Primary 240VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operating and low profile. • World wide applications, 50 or 60 Hz. operation, step down (240VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard 250V 2 pole, 3 wire - North American plug (NEMA 6-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required. • World wide applications, 50 or 60 Hz. operation, step down (230VAC to 115VAC). • Input is circuit breaker protected. • Hi-pot tested to 2 KV RMS. • Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding). • Input on "-NA" version - connected to a 5 foot cord and grounded North American 250V plug (NEMA 6-15P). • Output connected to a one foot long "pig tail" cord with standard North American 115V - 3 wire grounded receptacle (NEMA 5-15 R). • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Primary 230VAC, 50/60 Hz. Secondary 115VAC. • Circuit breaker in primary. • Provides circuit isolation and steps down primary voltage. • Hi-pot tested to 2 KV RMS. • Electrostatic shield between primary and secondary. • Input (Primary) connected to a 5 foot long cord and European (Schuko) grounded plug - note: Old inventory only. • Input - due to U.L. changes in 2007 - New production with the European (Shuko) parts would no longer be U.L. listed. Therefore, we have replaced this input plug with a standard North American 3-wire, 250V plug (NEMA 6-15P). • Output (Secondary) connected to a 1 foot long cord and standard North American 3-wire grounded receptacle (NEMA 5-15R). • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Down jacket HANSEN suits winter trips and won’t let you get cold even on coldest days. hood with detachable fur trim hood depth and size adjustment zip-garage to protect the chin three outer pockets one inner pocket double windshield strip faux fur on the inside of the back and inner front side wind and snow protective inner skirt Polartec Power Stretch Pro® sleeve cuff elongated folding backside detachable inside strap to carry on shoulders counterfeit protection system ID CODE©

Snowsuit with temperature conditions down to -35 ° for everyday use in city, hiking and for winter sports. Membrane outer fabric removes moisture and sustains heat. The snowsuit has 4 comfortable pockets and interior shoulder straps for indoor wear. •pleasant to touch membrane outer fabric Advance Alaska ® •temperature conditions down to -35 °C •insulation DSDTM PL: down (85/15) 80%, polyester 20% •hood depth adjustment •zip-garage to protect the chin •three external pockets •inside pocket •inner wind flap •faux fur on the inside of the back and inner front side •interior shoulder straps for comfortable inside wear •inner tightening waist •Power Stretch® sleeve cuff •trousers with snow protective cuffs •counterfeit protection system ID CODE©

Elegant, sporty, extremely lightweight, yet warm coat for women. Insulated with top-quality goose down, the style uses state-of-the-art, seamless D Tube shell technology to eliminate down leaking and allow for waterproof and lightweight durability. The front waterrepellent zipper is protected with an interior storm flap. The design features sleeves with elasticized cuffs, two warm side pockets with water-repellent zippers, an interior mesh pocket, and reflective elements on the sleeves and the placket. Use the elastic drawcord and cordlocks to manage the hood fit.

Extremely warm and comfortable men’s jacket that will not let you freeze at as low as -40°C. Membrane fabric guards from the elements such as snow, wind or moist. Large hood with adjustment, warm inner cuffs, snow- and windproof powder skirt, additional reinforcement of elbows and shoulders with synthetic insulator. Variety of pockets (5 outer and 6 inner) will allow to have everything necessary with you. Side zippers for easy access to the hip pockets of your pants or for comfortable driving. Inner shoulder straps for easy indoor wear.

Down bib pants – irreplaceable when staying in the cold for a long time. Perfect for winter activities at as cold as 30°С. Outer membrane fabric Advance® Alaska is specially built for the use in cold temperatures – even in extreme cold it stays cold and does not rustle. Everything necessary in winter: gaiters for snow protection, drawstring in the waist, spacious chest pocket, reinforced knees and bottoms edges.

Down snowsuit CLOUD is designed especially for cold climate zones. The inner tightening creates a slim fit and the SIZE UP SYSTEM© technology makes the snowsuit one size larger. The snowsuit is equipped with 360°C REFLECTIVE PRINTS© system. •faux fur on the inside of the back and hood •hood depth adjustment •two patch pocket •waterproof zipper •inner wind flap •inner tightening waist •Power Stretch ® sleeve cuff •trousers with snow protective cuffs •SIZE UP SYSTEM© •counterfeit protection system ID CODE© •360°C REFLECTIVE PRINTS© system •Cordura® fabric increases the durable of the bottom of the pants

Radwell provides on-site PLC programming, machine repairs, equipment installations and more. Our highly skilled technicians will get you up and running in no time.