Control lines - Import export

Our metal work services are fully adapted to meet your facilities maintenance and safety needs : replacement and/or modification of walkways installation and/or modification of ventilation ducts manufacture and installation of floors and access doors on production lines welding of reinforcements on to machine frames modification of fabric drive systems, presses, cylinders and rollers modification of pneumatic and hydraulic control systems installation of conveyor lines mechanical protective equipment: grids, gratings, walkways and doors machine guarding: stainless steel, steel, etc. We guarantee a highly flexible and adaptable service, while meeting all of your production requirements and maintaining the configuration of your existing facilities.

Error proofing for SLTC-FM preset click wrenches. The Torque Control Verifier (TCV) is ideal when the application calls for accuracy, repeatability and simplicity of the 2.4 GHz Wireless Preset Clicker-Type Torque Wrench, and only a single tool at the station needs to be controlled. The TCV-FM provides verification to the operator on the quality of each use, plus DC 24V relays and I/O port for line controller communications (PLC). The TCV-FM was created for those who desire to integrate their manual torque wrenches into their control line automation, without necessarily needing all of the features of the PTV-FM. The TCV performs the comparison and communication functions required for basic control, but without the stand-alone capabilities of the PTV.

Rotary Slip-type Preset Pokayoke (Error-proofing) Torque Wrench A preset torque wrench that prevents 3 problems: under-tightening, over-tightening, and other human tightening errors. QSPCAMS and QSPCALS are rotary slip-type torque wrenches with wired limit switch. When set torque is reached, rotary slip occurs with simultaneous output of a contact signal from the limit switch. Signals from the limit switch are captured on a programmable logic controller (PLC) or similar device to establish a Tightening Assurance System using assembly line interlock controls. The limit switch can be connected to a CNA-4mk3 count checker (sold separately) to easily create a tightening count management system. The set torque cannot be changed without using a special tool (sold separately), preventing the operator from changing torque by mistake. QSPCAMS and QSPCALS have a highly durable curly cord. Length of standard MS/LS curly cord (when extended) ~2m. [...]

The innovative recuperation module from CIC acts as an energy-saving valve and control module directly in the pneumatic circuit. Functionality : It is installed directly on the consumer - e.g. on the pneumatic cylinder or in the pneumatic control circuit. The recuperation valve with its integrated control electronics measures and regulates the air consumption and feeds used compressed air back into the working cycle for reuse. Advantages : Reduction of compressed air consumption by up to 80%. Increase in efficiency of the plant. Smart monitoring and diagnostics of the pneumatic system with numerous evaluation options and control in line with Industry 4.0. Detection of leaks and irregularities. Delivery for predictive maintenance data. Avoidance of downtimes. Simple control software and wireless transfer from PC.

Pokayoke torque wrench with limit switch output to eliminate missed tightening Adjustable clicker type torque wrench with limit switch output and durable curly cord. Upon reaching the set torque, the torque wrench "clicks" to complete tightening while the limit switch simultaneously sends out a contact signal. Signals from a limit switch are captured on a programmable logic controller (PLC) or similar device to establish a Tightening Assurance System using assembly line interlock controls. Torque setting is easy to adjust by knob and scale. The ratchet head has 24 teeth with a 15 degree operating range, allowing for use in space-limited working conditions. A clear “click” sound signals tightening completion upon reaching the set torque. Metal handle version (-MH) especially suitable for use in greasy conditions (oil, chemicals, etc.) such as garage work. Large adjusting knob designed to enhance usability in torque setting by oily hands. [...]

Digital Power Tool Tester with Pulse Counter Management of tightening screws begins on checking fastening tools. YET testers are designed for high precision torque control of mainly impulse type tightening tools. Also usable for angle nutrunners, screw drivers, ratchet wrenches etc. However impact wrenches can be tested also, you should not exceed approx. 2/3 of the testers rated capacity. Install the YET torque tester in a tool maintenance shop, test laboratory, or at production lines for effective control of fastening such as acceptance inspection, periodical check and torque adjustment. YET torque testers feature a parallel centronics printer port and a serial RS-232C computer interface enabling simultaneous protocol as well as external data recording. Key Features: High accuracy within R.O. ± 0.5 % (stat. Load) Large digital display (LED) Measuring time can be set by every 0.1 sec within 9.9 sec. Shut-off time can be set 1-2-3 sec.

CONTROL COMMANDS FOR STERILE PLANT: Achievement of the control of two plants intended for the production of injectable medicine for animals. The prize process was realized in partnership with our subsidiary Sofast specialized in the construction of equipment for the sterile processes SMG CHECK COMMANDED PRESS: Retroffiting process and cabling of two press 1500T and 320T for the manufacturing of join for drilling tubes, with implementation of automaton. REVAMPING sterilizer: Complete revision of the system of control commands of a line of sterilization of milk. Realization of electrical cabinets and software.

The Miller Weldmaster Bag Closing System is designed and build to weld and seal Thermoplastic and paper bags closed with a Pinch and/or Double Fold. The PS400 can weld Polywoven and thermoplastics with no glue; paper bags use pre applied hot melt. The PS400 can be integrated into an automatic filling line and/or manual feed systems. FEATURES, FUNCTIONS, & BENEFITS Digitally controlled by the Miller Weldmaster Smart Screen for quick production start up Controlled line speed matching system enables synchronization with converting line Precision folding system for clean straight folds Recipe management system for easy recall of different batches Quick change folding system for size and type of fold No glue eliminating consumables

The Miller Weldmaster PS150 Top Closing System is designed and built to weld and seal Polywoven, Thermoplastic and paper bags. The PS150 can seal Pinch closures. The PS150 can weld Polywoven and thermoplastics with no glue; paper bags use pre applied hot melt. The PS150 is custom designed for easy integration into your new or existing filling line. FEATURES, FUNCTIONS, & BENEFITS Digitally controlled by the Miller Weldmaster Smart Screen for quick production start up Controlled line speed matching system to enable synchronization with the converting line Precision folding system for clean straight folds Recipe management system for easy recall of different batches Quick change folding system for size and type of fold No glue eliminating consumables

Controller for electroless nickel baths / Controller for electroless copper baths Controller for electroless nickel baths Nickel controller with flow-through sensor Walchem's WNI Nickel Controllers are optoelectronic on-line analyzers that measure the actual concentration of nickel in solution.  The WNI410 is available as nickel-only, or with a pH control option which may be added in the field. Two separate pump outputs for nickel and reducer and another for pH are used, each of which is capable of totalizing either pump on-time, volume pumped, or metal turnovers. Integrated data logging is available to validate system performance. With a USB memory stick data and event logs that include nickel measurements, and relay status can be extracted. Download logs from the USB stick to a PC. Product features: Concentration Read in Units Selectable between grams per liter (g/L) or ounces per gallon (oz/gal). Backlit digital display also acts as a bar graph for a continuous "visual summar

 WPH webReady The pH/ORP on-line process controllers are designed for industrial, commercial, and municipal water treatment applications. The output configuration allows you to program up to four outputs in a variety of control modes. Select from on/off mechanical relays or pulse proportional control for direct connection to metering pumps. The easy-to-use menu format and pre-wired, pre-mounted panel system options make set-up and installation quick and simple. Integrated data logging is available to validate system performance. With a USB memory stick data and event logs that include electrode measurements, temperature and relay status can be extracted. Then download log files from the USB stick to a PC. Product features: Range of applications Select from pH or ORP measurements and from five output options. Use In-Range to control a solenoid valve to dump a batch treatment tank when measurement value is within limits, or program for Out-of-Range Alarm in waste treatment applica

A programmable logic controller (PLC) is a general-purpose control device that automatically controls machinery, facilities and assembly lines by user defined programs. It also has a variety of communication functions for sequence, motion and process control.