Results for
ZAMKO
Netherlands
Wooden Crates 800x2400mm – Clip Box. Economical way to safely transport goods and double stack in a truck. Dustfree. Reusable and reliable construction. Also used for Export.
Request for a quoteZAMKO
Netherlands
Wooden Crates 1000x2400mm – Clip Box. Economical way to safely transport goods and double stack in a truck. Dustfree. Reusable and reliable construction. Also used for Export.
Request for a quoteNORELEM FRANCE
France
R-clips are used for securing bolts and axles. They are easy to install and can be reused. The ends have no sharp edges. Double coil R-clips have a flatter spring characteristics and are easier to install. The double coil allows a tether cable to be attached to prevent loss. Drawing reference: Form E: with single coil. Form D: with double coil (coil direction can differ from the drawing).
Request for a quoteZAMKO
Netherlands
This wooden box with galvanized clips facilitates the packing of heavy products up to 5 tons. Thanks to its clip system, it is easy to assemble and disassemble and can be reused many times. It is lighter than traditional wooden boxes. Each side is separate, light, and ergonomic for the operator. It can also be easily recycled. With these boxes, goods can be transported economically, safely, and without damage. Due to the double stacking in the lorry, no air is transported. Dust-free. Reusable and reliable construction. Also used for export. FEATURES Solid: very shock resistant ISPM 15 certified Suitable for all transports (air-land-sea) Can be personalized (markings, handles, interior, open front, etc.) Also available in a reinforced version Available in custom sizes up to 6,000 x 2,400mm
Request for a quoteIGUS® GMBH
Germany
Solutions for plates Application examples - Automotive The new solution for all applications in stamped sheet metal retainers: iglidur® Clip On's are frequently used in seat and convertible top systems and multi-joint hinges. iglidur® clip-on bearings facilitate captive assembly even in punched sheetmetal / steering arms with limited fine blanking content. Compensation of axial clearance Loss secure pre-assembly possible Electrically conductive materials are optionally available Pressure-resistant materials until 80 MPa The Clip On bearings can also be produced from electrically conducting iglidur® RN89, thus permitting e-coating.
Request for a quoteIGUS® GMBH
Germany
iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]: iglidur® clip bearings are especially intended for the shaft bushing through plates. For this reason the bearing has a flange on each of the two front sides. After the clip-on the bearings are secured on both sides in the plate. The clip bearings have chamfered slot on the side that enables the mounting of the bearing on one side. After the mounting the bearing straddles and lines the bore in the plate. The shaft prevents the clip bearing from slipping out of the bore. The bearing cannot slip out of the bore even in axial movements. Extremely simple mounting through lateral slot Maintenance-free and self-lubricating Good flexibility in punch hole Good abrasion resistance Quiet operation Suitable for rotary and linear movements Extendibility through the slot Undetachable through double flange Special dimensions possible Plate thicknesses from 3 mm to 4 mm available from stock Material: iglidur® M250 Special properties of the iglidur® clip bearings iglidur® clip bearings are made from the most abrasion-resistant material, iglidur® M250. iglidur® M250 is a bearing material for rugged, wear-resistant bearing systems for medium loads. The bearings are self-lubricating and can be used dry. If required the bearings can also be lubricated. The material iglidur® M250 is resistant to all common lubricants. The iglidur® clip bearings are the ideal solution for bearing functions with low loads. The easy mounting makes it ideal for applications with difficult bearing locations. Compressive strength The permitted static surface pressure of iglidur® M250 amounts to 20 MPa at room temperature. Due to the good adaptability to uneven surfaces of the bearing housing, a high pressure load capacity of the clip bearings persists even in punched holes. For the most small bearing surfaces, the good vibration dampening properties and the insensitivity to misalignment are of primary importance. Surface speeds Clip bearings are particularly wear resistant in slow rotating, oscillating and axial motions. You can find the maximum gliding speeds for the various motions for the iglidur® M250 material under the materials data link shown below. A lubrication at installation or continuous lubrication raises the permitted surface speeds. Clip bearings are available from stock in dimensions of 3 to 25 mm. Fixation Triflex RS For mounting, the bearings are laterally pressed together with the large flange. The chamfered slot makes the bearing spiral-shaped, whereby it can be easily inserted in the plate. The remaining slot in the attached clip bearing can compensate for linear expansions of the circumference. Thus narrow bearing clearances are possible with clip bearings. The bearing clearance is dimensioned in such a way that in a housing bore with a nominal diameter, a shaft made with the same nominal diameter turns easily. The clip bearing can be used in H-tolerance housings up to H13. The turning of the clip bearing in the bore is also permitted. Operating temperatures The wear resistance of the iglidur® clip bearings are excellent with operating temperatures till 80°C. Even at low temperature the bearings remain elastic and abrasion resistant. When to use it? When a sheet metal feedthrough is required When the bearing should be captively clipped on in a drill hole with rough tolerance For rotating, linear and pivoting movements When a quick-mounting bearing solution is sought Clip bearings application examples When not to use it? When constant temperatures of more than +80°C occur iglidur® G When a high-precision bearing is needed iglidur® J When the housing bore is more than 4 mm long iglidur® Clips 2 iglidur® MKM When very high surface pressures occur iglidur® G iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]:
Request for a quoteIGUS® GMBH
Germany
MDM Double flange bearing b1 [mm]: When to use it? When the axial safety of the iglidur® clip bearing is not sufficient When there is a housing with very rough tolerance When high axial forces must be absorbed When not to use it? When an automated assembly is required iglidur® MKM When the iglidur® clip bearings offer adequate tightness iglidur® clip bearing When a large guide length is necessary iglidur® MKM MDM Double flange bearing b1 [mm]: Special features Large flange surfaces Symmetrical flange Easy installation Easy to clip on Undetachable after cataphoretic painting process Special option possible
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Wire rope clip similar DIN 741 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Wire rope clip similar DIN 1142 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium
Request for a quoteNORELEM FRANCE
France
The cable clip is a fastening component for cables and hoses with a diameter up to 12 mm. The clip is mounted by inserting the Tkey into a Tslot and twisting through 90°. The cables are held in place by the stretched Oring. Form A with one channel. Form B with two separate channels.
Request for a quoteFRAMEX
Spain
Practical cup holder clip made of resistant ABS. Easy to use and adaptable to any plastic plastic tumbler. With a special flat surface for customization. Available in a wide range of colours. PP
Request for a quoteBABYBRANDS
Greece
The Rosali pacifier clip has a small fairy who watches the pacifier with great care and always holds it in place. Playful and wooden, with safe materials and a wonderful design. Length: 21cm From newborn 0+
Request for a quoteBABYBRANDS
Greece
Selecta Pacifier Clip – Pink Stars has a beautiful design with stars in pastel colors! Small blue stars alternate with round wooden elements. The wooden clip with easy closure, ensures that the pacifier chain can be attached anywhere. So the pacifier is always near you, it does not fall nor can it be lost! This cute pacifier clip will become an integral accessory of your everyday life! Made with a lot of love and natural wood from Selecta in Germany.
Request for a quoteBABYBRANDS
Greece
The Selecta Pacifier Clip – Blue Stars has a beautiful design with stars in pastel colors! Small blue stars alternate with round wooden elements. The wooden clip with easy closure, ensures that the pacifier chain can be attached anywhere. So the pacifier is always near you, it does not fall nor can it be lost! This cute pacifier clip will become an integral accessory of your everyday life! Made with a lot of love and natural wood from Selecta in Germany.
Request for a quoteBABYBRANDS
Greece
The Crocolini pacifier clip has a small crocodile that monitors the pacifier with great care and always holds it in place. Playful and wooden, with safe materials and a wonderful design. Length: 21cm From newborn 0+
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ECAREPROTECT
Belgium
Clip Cap hair nets Light are particularly commonly worn as hygienic headgear in the food or industrial sectors. Disposable PP caps reliably cover the head and hair, preventing contamination. The hair nets are suitable for both employees and visitors in hygiene-sensitive areas.
Request for a quoteECAREPROTECT
Belgium
These hair nets are machine-made and therefore very economical. They are made of breathable PP fleece and are comfortable to wear for everyday work. The hair nets are detectable as they have an integrated metal strip. This metal strip can be detected by the detector machine. Detectors are mainly used in large food and pharmaceutical production facilities.
Request for a quoteECAREPROTECT
Belgium
These hair nets are machine-made and therefore very economical. They are made of breathable PP fleece and are comfortable to wear for everyday work. The hair nets are detectable as they have an integrated metal strip. This metal strip can be detected by the detector machine. Detectors are mainly used in large food and pharmaceutical production facilities.
Request for a quoteECAREPROTECT
Belgium
These hair nets are machine-made and therefore very economical. They are made of breathable PP fleece and are comfortable to wear for everyday work. The hair nets are detectable as they have an integrated metal strip. This metal strip can be detected by the detector machine. Detectors are mainly used in large food and pharmaceutical production facilities.
Request for a quoteECAREPROTECT
Belgium
These hair nets are machine-made and therefore very economical. They are made of breathable PP fleece and are comfortable to wear for everyday work. The hair nets are detectable as they have an integrated metal strip. This metal strip can be detected by the detector machine. Detectors are mainly used in large food and pharmaceutical production facilities.
Request for a quoteECAREPROTECT
Belgium
These hair nets are machine-made and therefore very economical. They are made of breathable PP fleece and are comfortable to wear for everyday work. The hair nets are detectable as they have an integrated metal strip. This metal strip can be detected by the detector machine. Detectors are mainly used in large food and pharmaceutical production facilities.
Request for a quoteECAREPROTECT
Belgium
Clip Cap hair nets Light are particularly commonly worn as hygienic headgear in the food or industrial sectors. Disposable PP caps reliably cover the head and hair, preventing contamination. The hair nets are suitable for both employees and visitors in hygiene-sensitive areas.
Request for a quoteECAREPROTECT
Belgium
Clip Cap hair nets Light are particularly commonly worn as hygienic headgear in the food or industrial sectors. Disposable PP caps reliably cover the head and hair, preventing contamination. The hair nets are suitable for both employees and visitors in hygiene-sensitive areas.
Request for a quoteECAREPROTECT
Belgium
Clip Cap hair nets Light are particularly commonly worn as hygienic headgear in the food or industrial sectors. Disposable PP caps reliably cover the head and hair, preventing contamination. The hair nets are suitable for both employees and visitors in hygiene-sensitive areas.
Request for a quoteECAREPROTECT
Belgium
Clip Cap hair nets Light are particularly commonly worn as hygienic headgear in the food or industrial sectors. Disposable PP caps reliably cover the head and hair, preventing contamination. The hair nets are suitable for both employees and visitors in hygiene-sensitive areas.
Request for a quoteECAREPROTECT
Belgium
Clip Cap hair nets Light are particularly commonly worn as hygienic headgear in the food or industrial sectors. Disposable PP caps reliably cover the head and hair, preventing contamination. The hair nets are suitable for both employees and visitors in hygiene-sensitive areas.
Request for a quoteECAREPROTECT
Belgium
Clip Cap hair nets Light are particularly commonly worn as hygienic headgear in the food or industrial sectors. Disposable PP caps reliably cover the head and hair, preventing contamination. The hair nets are suitable for both employees and visitors in hygiene-sensitive areas.
Request for a quoteResults for
Clip - Import exportNumber of results
79 ProductsCountries
Company type
Category