Clamp connection - Import export

For connecting round conductors and laminated copper bars SV Conductor connection clamp, 1-4 mm², for bar thickness 5 mm

Completely mounted multi-clamping stations with integrated UNI lock Ø138 mm mounting clamps. The clamping stations are secured to the machine table directly or with clamps. Common bore patterns are pre-centred on the rear side for mounting. Clamping stations can be aligned via the 14H7 reference holes. The clamping stations are actuated via a central pneumatic connection. The high clamping forces are generated by the integrated spring package (the unit clamps in the de-pressurized state). The release process occurs pneumatically. The following retaining forces are possible with the UNI lock clamping bolt in conjunction with mounting screws M10, M12, M16: Retaining force (M10) 35,000N/module Retaining force (M12) 50,000N/module Retaining force (M16) 75,000N/module

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air.

Clamping angle diecast zinc. Grip diecast zinc DIN EN 12844. Steel parts stainless steel 1.4305. Cam lever cast aluminium. Body steel. Version Clamping angle painted aluminium tone. Handle powdercoated. Stainless steel bright. Slot key electro zincplated. Cam lever black powdercoated, steel parts black oxidised. Note The clamping angles are used for connecting two profiles of the same series that have contact on the side faces and cross at any angle. Loosening the screw releases both clamps allowing free rotation and sliding along the slots. The clamping angles are generally used in pairs or in combination with a joint angle.

Clamping levers with safety function prevent changes in the locking point through accidental opening or closing. In the default position, the lever can be freely rotated and has no connection to the clamping point. The grip lever only engages when pushed down and the clamp can the loosened or tightened. A spring sets the lever automatically into the default position when released.

Processes: MIG/MAG – Gasless Tubular – MMA – TIG DC Lift Materials: Steel – Carbon – Stainless – Aluminum Electrodes: Rutile – Basic – Stainless Applications: Bodywork – Repair – Maintenance Includes: Cable with ground connection – Electrode holder clamp

High-Performance Plasma Cutting Machine: Built to handle harsh environmental conditions, suitable for on-site operations with a generator or in a workshop environment. Starting: Innovative and advanced arc starting without HF. Performance: Innovative and advanced electrode and nozzle design. Longer Lifespan: Innovative and advanced design increases the life of consumables. Faster: higher travel speeds and sheet thickness. Flexible: multiple torch configurations and different materials: carbon steel, stainless steel, aluminum and many more. Concentrated plasma flow: less heat input, less distortion. What's included: 2 m input cable 7.5m manual cutting torch Earth and cable clamp Air Connection Kit Cutting Torch Consumables Kit

Quick assembly without tools. Suitable for combining sheets, plates etc. Material: PA 6 Colours: last digits 000 = natural last digits 002 = grey ~RAL 7000 last digits 087 = blue ~RAL 5017 last digits 114 = black ~RAL 9005 last digits 124 = red ~RAL 3020 last digits 132 = yellow ~RAL 1023 Two parts are needed for every connection! For thin clamping width (from 0.9 mm) you have to use a snap-ring. Additional information: Dimensions A 5.5 mm and part no. 0960610 = slotted head. You get the best clamping effect if the hole diameter matches dimension A.

SF-IL Inline Screen Filters Heavy duty industrial inline screen filters for coarse applications. Standard units are supplied with inline connections for easy istallation. Industrial design Range of screen sizes Hinged closure Stainless Steel Construction PN16 flange 10 bar pressure rating PED compliant F-SF Inline Bulk Transfer Filter Designed for product transfers from holding tanks to tankers. Ideal for product transfers from tankers to tanks Industrial or hygienic design Camlock couplings for quick connections Clamp closure for easy maintenance Basket in range of mesh sizes PED 10 bar -10 / 80 °C

Product Features: • Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required. • Flexible world wide applications, 50 or 60 Hz. operation, step down (230VAC to 115VAC) or step up (115VAC to 230VAC). • Totally enclosed rear case, includes handy internal grounding bolt. • Extra vacuum varnish for use in high humidity. • Includes a rear mounted (but not wired), standard 115VAC, 3-wire receptacle. • Enclosed case with convenient knockouts and includes two cable clamps allowing for easy wire connections. • Models 170SE, 170AW, 170BE, 170CE and 170DE are CSA certified (209651). • Connection by flexible leads, 8" minimum length. • Remember - These units do NOT convert line frequency.