Results for
AICS BUSINESS SOLUTIONS CELIK SANAYI VE TIC. LTD. STI.
Turkey
Our Heat Treating Suppliers are certified by Aeronautical and Automotive Industries. Annealing Normalizing Stress Relieving Quenching and Tempering Vacuum Hardening Homogenization Decarburization Nitriding Carburization Case Hardening and more
Request for a quoteNORELEM FRANCE
France
Ball element case-hardened steel. Thrust pad ETG 100 steel.
Request for a quoteNORELEM FRANCE
France
Form A: Ball element case-hardened and black oxidised. Form B: Bright. Form C: Ball element case-hardened and black oxidised. Form D: Ball element bright. Form G: Ball element case hardened and black oxidised, foot with anti-slip plate. Note: The anti-slip plate absorbs vibrations and prevents the swivel foot slipping The loading indicated in the table is a recommendation up to which permanent static load the swivel foot can be used.
Request for a quoteNORELEM FRANCE
France
Case-hardened, black oxidised and ground. Note: To align fixtures and clamping elements on subplates and palettes with location holes. They can be mounted in holes or slots.
Request for a quoteNORELEM FRANCE
France
Case-hardened. Toleranced diameter ground. Note: These centring pins are suitable for the central holes of our workholding elements 01148, 01263, 01265, 01267 and 01850.
Request for a quoteNORELEM FRANCE
France
Case-hardened and black oxidised. Note: Positioning feet are used as supports, stops and thrust pads for fixtures and general machine and appliance construction. Drawing reference: Form A: External thread and flat face Form B: External thread and convex face Form C: External thread and serrated face Form K: External thread and carbide serrated face Form L: External thread and POM insert Form D: External thread and flat face Form E: External thread and convex face Form F: External thread and serrated face
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 4 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. The gripping pull-back action to actuate the collet chuck means the work piece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut. The 5C and 16C collets have been designed with a long small nose diameter allowing for good clearance for tooling. All collet closers are case hardened and ground optimising the rigidity, strength and durability.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Aluminium serrated soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 6061 Aluminium. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Aluminium cross tennon soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 6061 Aluminium. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Aluminium cross tennon soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 6061 Aluminium. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 6 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 6 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 5 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 5 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 4 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 4 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Can be used for 1st Operation only Deadlength Actuation Eleminates part movement when Clamping Case hardened, optimising the rigidity, strength and durability. Varibore Collets have a large range allowing for easy holding of Rough Bar Klamp CRS54 collet chucks are suitable for collets which have a large gripping range. Allowing the collet chuck to handle very rough and unfinished bar, preparing it for a high accuracy second operation. Workpiece remains in a fixed position during actuation, allowing for precise z-axis positioning. A tapered sleeve is pushed forward, compressing the collet and gripping the workpiece
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations. Klamp DHF collet chucks are suitable for collets which have a +/-0.5mm gripping range. Changing collets via a quick change gun reduces the change over time to seconds
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations. Klamp DHF collet chucks are suitable for collets which have a +/-0.5mm gripping range. Changing collets via a quick change gun reduces the change over time to seconds
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations. Klamp DHF collet chucks are suitable for collets which have a +/-0.5mm gripping range. Changing collets via a quick change gun reduces the change over time to seconds
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations. Klamp DHF collet chucks are suitable for collets which have a +/-0.5mm gripping range. Changing collets via a quick change gun reduces the change over time to seconds
Request for a quote1ST MACHINE TOOL ACCESSORIES
United Kingdom
Can be used for 1st Operation only Deadlength Actuation Eleminates part movement when Clamping Case hardened, optimising the rigidity, strength and durability. Varibore Collets have a large range allowing for easy holding of Rough Bar Klamp CRS60 collet chucks are suitable for collets which have a large gripping range. Allowing the collet chuck to handle very rough and unfinished bar, preparing it for a high accuracy second operation. Workpiece remains in a fixed position during actuation, allowing for precise z-axis positioning. A tapered sleeve is pushed forward, compressing the collet and gripping the workpiece
Request for a quoteResults for
Case hardening - Import exportNumber of results
37 ProductsCountries
Company type