Carbonate - Import export

Mortalhas Smoking King Size com filtros Ultra-thin, very slow and smooth burning paper Rolling Papers per Pack: 33 Filters per package: 33 Dimensions: 110x37mm

MASCOTTE active carbon filter Filters for all types of roll-ups Reduces tar intake Pleasant, fresh and smooth taste

actiTube active carbon filter Filters for all types of roll-ups Reduces tar intake Pleasant, fresh and smooth taste

Cam tool steel, hardened and black oxidised. Shaft carbon steel, hardened and black oxidised. Grip carbon steel, black oxidised. Ball knob black thermoset PF 31. Note: Admissible hand force for the handle. Accessory: Standard handles 06355. Screw-in handles with adjustable torque 06357.

The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.

Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G.

For suitable supports and adjustable rest pads, see 02130 and 02150.

Body and set screw carbon steel. Version: Body black oxidised. Set screw tempered and black oxidised. Note: The adjustable stops have three tapped holes to accept the set screws.

Form C and F: Ball steel, ball seat high-carbon steel. Form G and J: Ball high-carbon steel, ball seat steel. Version: Form C and F: Ball hardened and black oxidised, ball seat phosphated. Form G and J: Ball phosphated, ball seat hardened and black oxidised. Note: The self-aligning pads serve as stops, rests and thrust pads in fixture construction. The seating face returns to the start position when the load is removed. Ball secured against rotation. Drawing reference: Form C: male thread, flattened ball, smooth Form F: male thread, flattened ball, diamond grip Form G: press fit, flattened ball, smooth Form J: press fit, flattened ball, diamond grip

NaOH Min %48 Na2CO3 Max % 0,9 Fe Max 0,1 ppm Boiling Point 143 ◦C Specify Gravity 1,52gr/cm3 Pyhsical Spec Clear Liquid,0 colorless Packing method Bulk (Road Tankers), IBC, 200 LT Polyethylene Barrels. General Applications 1- Pulp and Paper Industry (Pulp Cooking) (to de-ink water) 2- Extract Alumina (Aluminum Industry) 3- Industrial Chemicals 4- Adjusting PH in Producing Biodiesel from Vegetable Oil 5- Cleaning Agent to Cleaning Food Processing Equipment and Bottles 6- Drying Air to Absorb CO2 from Gases 7- Removing Grease and Paint from Metal 8- Textile Industry Mercerizing Cotton 9- Making Pretzels 10- Peeling Vegetable and Teather 11- Regenerating Resins and Water

From diameter D1 over 15 mm size increases are 0.5 mm.

From diameter D1 over 15 mm size increases are 0.5 mm. 1) Chamfer for insert

Series processes: MIG MAG – Tubular- TIG DC Lift – MMA CEL Optional processes: MIG Pulse – MIG Bi-Pulse – TIG DC Pulse Materials: Carbon steel – Stainless – Aluminum – Copper Applications: Metal carpentry and boilermaking – Automotive industry Chemical and paper industry – Body manufacturing Sports and livestock facilities – Urban furniture Repairs – Maintenance – Construction – Training centers – Automation Includes: Cable with ground connection – Gas tube – Roulettes Ø 37 – 0.8-1.0 mm. “V”

Processes: TIG Pulse – TIG DC HF – MMA Materials: Carbon and stainless steel Applications: Metal carpentry – Boilerwork – Maintenance – Repair – Bodywork

Analysis of the order, shipping after sample parameterization, definition of the delivery model to the customer and a variable period of 30 to 60 days after order confirmation is estimated in order to deliver

sample is sent, the packaging depends on the customer's specific requirements, and the delivery time is 30 days. Price and logistical efficiency,

sample, test, and packaging is sent according to the customer's request. Then the quotation +is closed according to this form of delivery. 45 days delivery time. Price and logistical efficiency ,

SURFACE FINISH. APPROVED FINISHES EN 10202 Bright, Fine stone, Stone, Silver, Matt COATING. PRECISE VALUES FOR TIN COATINGS EN 10202 HICKNESS TOLERANCES Thickness tolerances and edge reduction according to EN 10202 The thickness of the material must meet the following requirements: a) Deviation from the agreed thickness, measured on the centre line of the strip, must not exceed ± 5%. b) Deviation from the agreed thickness, measured at any point at a distance of no less than 6 mm from the sheared edge, must be between +5% and -8%. WIDTH TOLERANCES Other, closer dimensional tolerances are possible under a commercial agreement. EDGE CAMBER TOLERANCES Tolerances for edge bending under commercial agreement.

SURFACE FINISH. APPROVED FINISHES EN 10202 Bright, Fine stone, Stone, Silver, Matt COATING. PRECISE VALUES FOR TIN COATINGS EN 10202 HICKNESS TOLERANCES Thickness tolerances and edge reduction according to EN 10202 The thickness of the material must meet the following requirements: a) Deviation from the agreed thickness, measured on the centre line of the strip, must not exceed ± 5%. b) Deviation from the agreed thickness, measured at any point at a distance of no less than 6 mm from the sheared edge, must be between +5% and -8%. WIDTH TOLERANCES Other, closer dimensional tolerances are possible under a commercial agreement. EDGE CAMBER TOLERANCES Tolerances for edge bending under commercial agreement.

THICKNESS TOLERANCES: According to the EN 10140:2006 Standard. Specified thickness tolerances for cold rolled strip and strip obtained strapping wide precision rolling w. WIDTH TOLERANCES: Width tolerances according to the EN 10140 Standard for nominal widths Other, closer dimensional tolerances are possible under a commercial agreement LENGTH TOLERANCES: According to the EN1040 Standard. Other tolerances are possible under a commercial agreement EDGE CAMBER TOLERANCES: Edge curve tolerances according to the EN 10140 Standard Other edge curve tolerances possible under a commercial agreement RIPPLE - LONGITUDINAL FLATNESS The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm over 1000 mm. Any other flatness requirement must be agreed when placing the order.

THICKNESS TOLERANCES: According to the EN 10140:2006 Standard. Specified thickness tolerances for cold rolled strip and strip obtained strapping wide precision rolling w. WIDTH TOLERANCES: Width tolerances according to the EN 10140 Standard for nominal widths Other, closer dimensional tolerances are possible under a commercial agreement LENGTH TOLERANCES: According to the EN1040 Standard. Other tolerances are possible under a commercial agreement EDGE CAMBER TOLERANCES: Edge curve tolerances according to the EN 10140 Standard Other edge curve tolerances possible under a commercial agreement RIPPLE - LONGITUDINAL FLATNESS The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm over 1000 mm. Any other flatness requirement must be agreed when placing the order.

The Carbon microfibre cloth is a versatile cloth with carbon fibres that leaves all surfaces clean and streak-free. The carbon fibres contain graphene, which is 200 times stronger than steel and 5 times lighter than aluminium. This makes the Carbon microfibre cloth flexible but also incredibly strong. Thanks to graphene’s high resistance, the cloth has antibacterial properties. And on top of that, the cloth is antistatic, making it easy for dust to stick to it. Features - Combination of microfibres and carbon fibres - Highly flexible cleaning cloth - Antibacterial properties - High absorbency - The innovative texture gives the best wiping results on all surfaces - Has a long lifespan of up to 500 washes (if washed up to 60° C)