Results for
ZAMKO
Netherlands
Heavy duty mesh wire pallet box 1000×1200 “made in EU” by company with very high after sales service standards
Request for a quoteZAMKO
Netherlands
Heavy duty mesh wire pallet box 800x1200m with closed walls. “Made in EU” by company with very high after sales service standards
Request for a quoteZAMKO
Netherlands
Heavy duty mesh wire pallet box 800x1200m “made in EU” by company with very high after sales service standards
Request for a quoteNORELEM FRANCE
France
Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sold in pairs. Note On telescopic slides with partial extension both sides, the travel is less than the installed length. Latches in open position on both sides. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 50,000 cycles. The load capacity is ca. 75% lower by horizontal mounting. The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide. Advantages Pulls out in both directions Latches in open position on both sides Light running
Request for a quoteNORELEM FRANCE
France
Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sold in pairs. Note By telescopic slides with full extension, the travel is roughly equal to the installed length, which ensures greater comfort and accessibility. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 80,000 cycles. Not suitable for horizontal mounting. The head height of the fastening screws should not exceed 1.8 mm otherwise there is a risk of collision with other parts of the slide. Advantages Low slide thickness Light running Precise guidance for high lateral stability
Request for a quoteNORELEM FRANCE
France
Backstop steel. Axis steel. Cage polyamide, carbonfibre reinforced. Version Electro zincplated Cage black. Note The backstop element is matched to the aluminium profiles for roller rails and can be mounted on them quickly and easily. It prevents reverse movements of items on the roller tracks. No tools required. Suitable for aluminium profiles Type B and I.
Request for a quoteNORELEM FRANCE
France
Roller and cage polyamide, glassbead reinforced. Steel axis. Cage black. Roller available in different colours. The roller elements are matched to the aluminium profiles for roller rails and can be mounted on them quickly and easily. No tools required. The compact design with a small centre distance is optimally designed for the lowvibration conveyance of sensitive items. Suitable for aluminium profiles Type B and I.
Request for a quoteNORELEM FRANCE
France
Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160.
Request for a quoteNORELEM FRANCE
France
Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160.
Request for a quoteNORELEM FRANCE
France
Outer jacket stainless steel. Cage stainless steel. Balls stainless steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seals and a stainless steel cage. The bearing is secured with DIN 471/472 circlips. Linear ball bearings with doublesided seals should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts.
Request for a quoteSMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Angular needle roller flat cages, Series: RW30-Al-G2 choosable in length up to 2000mm Type Ø Dw A1 A2 Lw t e Lk max C N C0 N weight g/Lk (1000mm) RW30-AL-G2 3,5 30 24 17,8 7,00 5,0 2000 82.700 268.700 598 Basis manufactured from light metal – aluminium (standard) High precision and strength at light deadweight Assigned for hard working conditions, heavy loads and fast accelerations Working temperature up to 150°C
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Angular needle roller flat cages, Series: RW25-Al-G2 choosable in length up to 2000mm Type Ø Dw A1 A2 Lw t e Lk max C N C0 N weight g/Lk (1000mm) RW25-AL-G2 3,0 25 19,0 13,8 6,00 4,5 2000 62.900 209.400 408 Basis manufactured from light metal – aluminium (standard) High precision and strength at light deadweight Assigned for hard working conditions, heavy loads and fast accelerations Working temperature up to 150°C
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Needle roller flat cages, Series: R25-Al-G2 choosable in length up to 2000mm Type Ø Dw A1 Dw Lw t e Lk max C N C0 N Ca +0,2 Ca1 min Ha weight g/Lk (1000mm) R25-AL-G2 3,5 25 3,5 17,8 7,0 7,5 2000 68.200 190.000 25,4 18 3,2 294 *) - Load capacity for the theoretical length of the cage of 100 mm with the thrust force "F" in accordance to the drawing. - The load capacity is calculated for guides with hardness of 60 +/- 2 HRc oand surface roughness of Ra<0,4. - Load capacity of bearing cages is calculated on the basis of number of bearing needles mounted in the cage. Basis manufactured from light metal – aluminium (standard) High precision and strength at light deadweight Assigned for hard working conditions, heavy loads and fast accelerations Working temperature up to 150°C
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Angular needle roller flat cages, Series: RW20-Al-G2 choosable in length up to 2000mm Type Ø Dw A1 A2 Lw t e Lk max C N C0 N weight g/Lk (1000mm) RW20-AL-G2 2,5 20 14,3 9,8 5,00 4,0 2000 40.300 135.500 239 Basis manufactured from light metal – aluminium (standard) High precision and strength at light deadweight Assigned for hard working conditions, heavy loads and fast accelerations Working temperature up to 150°C
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Needle roller flat cages, Series: R20-Al-G2 choosable in length up to 2000mm Type Ø Dw A1 Dw Lw t e Lk max C N C0 N Ca +0,2 Ca1 min Ha weight g/Lk (1000mm) R20-AL-G2 3 20 3 13,8 6,0 4,5 2000 51.900 148.000 20,4 14 2,7 202 Basis manufactured from light metal – aluminium (standard) High precision and strength at light deadweight Assigned for hard working conditions, heavy loads and fast accelerations Working temperature up to 150°C
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Angular needle roller flat cages, Series: RW15-Al-G2 choosable in length up to 2000mm Type Ø Dw A1 A2 Lw t e Lk max C N C0 N weight g/Lk (1000mm) RW15-AL-G2 2,0 14 10,5 6,8 4,50 3,5 2000 26.200 88.900 138 Basis manufactured from light metal – aluminium (standard) High precision and strength at light deadweight Assigned for hard working conditions, heavy loads and fast accelerations Working temperature up to 150°C
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Needle roller flat cages, Series: R15-Al-G2 choosable in length up to 2000mm Type Ø Dw A1 Dw Lw t e Lk max C N C0 N Ca +0,2 Ca1 min Ha weight g/Lk (1000mm) R15-AL-G2 2,5 15 2,5 9,8 5,0 3,5 2000 35.800 103.800 15,3 10 2,2 120 Basis manufactured from light metal – aluminium (standard) High precision and strength at light deadweight Assigned for hard working conditions, heavy loads and fast accelerations Working temperature up to 150°C
Do you sell or make similar products?
Sign up to europages and have your products listed
Results for
Cages - Import exportNumber of results
18 ProductsCountries
Company type