Bottoms for tanks - Import export

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

The TankSponge Eco absorbs water that sits at the bottom of an oil storage tank. The weight in the tank sponge helps the cage sink to the bottom of the tank where the water collects. There is a super absorbent polymer within the insert to absorb the water. The super absorbent polymer doesn’t soak up any fuel, only the water. There is a 3 metre string attached to the insert, so it can be removed and replaced with ease. There is a cage around the insert to show you when it’s full and needs replacing. Benefits The tank sponge reduces the risk of water damage in an oil tank that can get into a boiler system/range cooker, machine tanks or generators. Having a weight in the sponge will ensure that the sponge lays flat at the bottom of the tank where the water is.

Homogenizing large tank volumes, mixing-in additives during the production of lubrication oil and suspending solids in a liquid phase are typical applications for the pneumatic pulse-mixing technology of PULSAIR. The process, patented worldwide, is based on an injection of an adjustable pressure pulse underneath an accumulator plate, installed on the bottom of the mixing tank. The injected pressurized air forms a big air bubble, soaring within the tank and displacing the surrounding liquid. Meanwhile negative pressure is generated underneath the bubble, sucking the surrounding material. This produces in the tank a vertical flow directed upwards, adjustable according to the requirements by varying the pulse length and the pulse duration. Contrary to mechanical agitators the height of the tank is very marginal. No moving parts or shaft bearings are in the tank.

Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

Model SPABP2150 Full floating cap INOX 316L Swivel stem Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910 mm>

304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system on welded feet Model SPABP500 Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPABP400A model With pneumatic system Capacity 405 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

304 stainless steel tank Model SPABP2800 Full floating cap INOX 316L Swivel stem with stainless steel handle Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Stem Diameter 1200 mm Height (without stem) 2900 mm Total height (with stem) 3410 mm

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank SPA700 model Pneumatic system Capacity 696 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304L stainless steel tank Model SPABP700 With pneumatic system On welded feet Effective capacity 696 liters Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

TECHNICAL SPECIFICATIONS - Vertical cylindrical tank on legs: C26. C27 - Pierre Guerin brand - Flat bottom tank on legs - Capacity : 90 HL - Material : 304 L - Year: 1998 - Interior finish: cold-rolled finish - Exterior finish: brushed Roof - Off-centre chimney - Ø 300 hatch with arm clamp Bottom - Fully drained, Ø 50 stainless steel ball valve - Feet with adjustment screws and plates Shell - Internal opening stainless steel door 410 x 530 - Clear drain, Ø 50 stainless steel ball valve and decanter elbow - Stainless steel taster - 1 stainless steel temperature control flag DIMENSIONS - Diameter: 2100 mm - Height: 3600 mm

TECHNICAL SPECIFICATIONS - Reference : 007236 - Pierre Guerin brand - Flat bottom tank on feet - Capacity : 190 HL - Material : 304 L - Interior finish : cold-rolled finish - Exterior finish : brushed Roof - Central chimney - Ø 500 stainless steel hatch with clamps - Interior coil inlet and outlet - Tapping for temperature sensor - 1 x 50-macon connection to chimney, internally externally threaded - Walkway support Bottom - Fully drained, Ø 50 stainless steel ball valve - Feet with adjustment screws and plates - Cooling circuit on bottom of tank Shell - 410 x 530 stainless steel door with external opening - Stainless steel ball valve Ø 50 for clear draught - Stainless steel taster - 2 stainless steel coils inside - 6 turns of shell circuit - 1 level with return in the chimney DIMENSIONS - Diameter: 2785 mm - Overall height: approx. 4500 mm

304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

TECHNICAL SPECIFICATIONS - Vertical cylindrical on legs - Off-centre conical dome - 38% sloping conical base - Interior and exterior finish: glazed 2B - Off-centre chimney diam. 400 mm and height 300 mm - ELICA 316L stainless steel anti-retention top flap - Oval ELICA autoclave door 308x440 mm, inside opening at bottom of shell - 3 single male DIN 80 connections on the dome - Oval autoclave door ELICA 308x440 mm internal opening at bottom of shell - Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve - 5 lifting rings, including 1 at bottom of tank - Bracket + manufacturer's plate - 1 single male DIN 65 connection in shell - 1 single male DIN 65 ferrule connection - Earth connection - Total drain pipe + male at end of pipe DIN 65 DIMENSIONS AND WEIGHT - Diameter: 2420 mm - Height : 4517 mm - Weight : 754 Kg

Vertical cylindrical on feet Eccentric conical dome Conical bottom slope 38 % Interior and exterior finish glazed 2B Decentered chimney Ø 400 mm and height 300 mm ELICA 316L stainless steel antiretention hatch 3 simple male DIN 80 fittings on the dome Double acting ELICA 1000 HL stainless steel 316L valve, horn mounting 5 lifting rings including 1 at the bottom of the tank Support + manufacturer's plate 1 single male DIN 65 fitting in ferrule 1 single male DIN 65 fitting in ferrule Taken from the ground 5 thermal regulation rings with water I / O sleeve 4.75 m2 5 heating rings with water I / O sleeve 4.75 m2 Total thermoregulation area 9.5 m2> Thermoregulation ratio per 100 HL 6.31 m2 Tapered connection + stainless steel faceplate for agitator mounting Full stainless steel buffer + EPDM seal for stirring nozzle stirring Total drain pipe + male at the end of DIN 65 piping 4 outside legs, tank height 800 mm Stainless steel flat reinforcement belt 150 x 5

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Bright annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clearing with stainless steel ball valve output 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet Cooling belt H. 500 mm Level indicator with stainless steel protection Circular door diameter 400 mm positioned flush with the bottom of the shell DIN 15 tasting tap Ladder support bar Clock thermometer