Audio - Import export

RockNet 300 is a versatile digital audio network solution for live sound applications providing up to 160 channels and 96 kHz / 48 bit. RockNet is a real-time, low latency audio distribution network tailored to tour and installed sound applications. RockNet provides a universal solution to almost any imaginable audio distribution challenge and behaves very much like a traditional analog split system. It conveys up to 160 24 bit/48 kHz audio channels counter- rotating on a single CAT5 cable. RockNet products are designed for heavy-duty road use. Their ruggedized steel enclosures resemble the look and feel of a modular stage box. All devices feature locking IEC connectors for the redundant power supplies. All other connectors are entirely gold-plated, and the circuit design is streamlined for ultra low noise and minimum distortion to meet the highest demands in audio quality. RockNet is a genuine audio network platform designed purposely for live sound applications. It is a...

RockNet is a real-time, low latency audio distribution network tailored to tour and installed sound applications. RockNet provides a universal solution to almost any imaginable audio distribution challenge and behaves very much like a traditional analog split system. It conveys up to 160 24 bit/48 kHz audio channels counter-rotating on a single CAT5 cable. RockNet products are designed for heavy-duty road use. Their ruggedized steel enclosures resemble the look and feel of a modular stage box. All devices feature locking IEC connectors for the redundant power supplies. All other connectors are entirely gold-plated and the circuit design is streamlined for ultra low noise and minimum distortion to meet the highest demands in audio quality. RockNet is a genuine audio network platform designed purposely for live sound applications. It is a cost-effective, integrated networking product invented, designed, and optimized for audio contribution and distribution. RockNet provides ultra...

RockWorks is a real-time management system for RockNet and enhances the remote operation of complex widespread networks. Each RockNet device can be monitored and con gured on screen according to the front panel operation. RockWorks enables labeling of each device and channel within the network. The software provides alarm indications and allows for a network- wide default reset of channel parameters and naming. For a more comfortable setup, RockWorks also features an offline editor. RockWorks MY Card Preset Dialog The RockWorks preset dialog provides full access to RockNet MY interface card presets and allows for the individual configuration of emulation mode, channel routing, microphone pre-amp count (RN.301.MI/RN.101.IO) as well as sync master settings. A total of 15 presets (1...9, A...F) can be configured. Presets are activated by using the rotary switch on the front panel of the RockNet MY cards. In order to enable maximum flexibility in routing, the number of dropped...

In addition to the MADI interfaces available on the processor card, the MN-RN300 RockNet Audio Interface Card gives access to the wide range of Riedel RockNet audio interface modules.

In addition to the MADI interfaces available on the processor card, the MN-RN300 RockNet Audio Interface Card gives access to the wide range of Riedel RockNet audio interface modules.

Philips Fidelio T1WT/00 Wireless Earbuds TWS, ANC, BT 5.2, White EU

Test Lead from Mueller Cables Connection End 1 Stackable Banana Connection End 2 Stackable Banana Wire Gauge (AWG) 18 Amps 20 Wire Insulation Material Silicone Rohs Compliant YES, Exemption 6c

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

Product Features: • Perfect for audio input, line matching, isolation or output transformer applications. • 500 milliwatt (+/- 1.5 db, 300 Hz. - 50 kHz.). • Epoxy potted in an attractive black moulded case, Pin type P.C. board mount (min. 0.187" length). • In some models where no center tap is required (on secondary), pin No. 5 is omitted. • Power level ratings are maximum at lowest frequency ratings. • Power can be increased slightly at higher frequencies. • Will withstand soldering for 10 sec. @ 260°C, ambient temp. 85°C max.

Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone". • Output transformers marked UPGRADE allow for more versatility by added secondary connections that did not exist on the original units.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. • Sealed case and wax potted core internally for stable characteristics and long life. • Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, amy be down 1 db @ 20 Khz.). • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance. • Distortion is apx. 1.5% @ 20 Hz. under full power. • Electrostatic shield between pri. and sec. connected to the green lead. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice vera for impedance matching. • Includes mounting hardware. • Lead length: Min. 4". • Shipping weight 0.4 lb. (0.18 kg).

Product Features: • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware. • Includes wire leads (minimum length of 4"). • Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz. • Insertion loss of apx. 1 db. • Maximum power level +15 dbm. (except 841A, 842A and 844A which are +20 dbm) with specified characteristics, or higher levels with reduced low frequency performance. • Electrostatic shield between prim. and sec. • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching. • Overall dimensions 1.75" (44.5mm) wide x 1.25" (31.8mm) deep x 2.56" (65mm) high max. • Shipping weight 0.5 lbs (0.2 kg).

Product Features: • Rugged black epoxy potted case with 9 pin connections (.025" square by 0.5" long). • Frequency response minimum @ 0 dbm +/- 1 db max. (+/- 0.5 db is typical) of 30 Hz. to 30 Khz., except 560Q which is 30 Hz. to 15 Khz. • Higher signal levels possible with reduced low frequency performance. • Insert loss of 1 db maximum. • Electrostatic shield between primary and secondary connected to core and brought out to pin "SH". • Humbucking construction. • Balanced split windings on pri. and sec. for circuit versatility. • Primaries and secondaries can be reversed for impedance matching. • Overall dimensions 1.64" (41.7mm) x 1.33" (33.8mm) x 0.85" (21.6mm) high max. • Shipping weight 4 oz. (0.1 kg).

Product Features: • Pin type (0.25" length and 0.025" square), P.C. board mount. • Economical, open type, horizontal bracket construction. • Includes clinching lugs for extra mounting strength. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 2" grid pin spacing. • Insulation test 250V rms. • Net weight: 0.6 oz. (148 Series) and 1.0 oz. (149 Series).

Product Features: • Pin type (0.25" length and 0.025" square), P.C. board mount. • Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2" grid pin spacing. • Insulation test 250V rms. • Net weight: 0.6 oz. (148 Series) and 1.0 oz. (149 Series).

Product Features: • Applications: Driver, Input, Interstage, Isolation. • 100mW power level at 200Hz. - 15kHz. • Pin type (0.0375" x .02"), P.C. board mount. • Economical, open type construction. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion less than 0.5% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.187" grid pin spacing. • Insulation test 1500V rms, • Net weight: 0.5 oz.

Product Features: • Pin type (0.25" length and 0.035" diameter), P.C. board mount. • Low profile, open type construction. • Frequency response 200 Hz. - 50 Khz. (+/- 1 db, ref. @ 1 Khz.). • Net weight 0.6 oz.

Product Features: • Studio grade frequency response: 20 Hz. - 20 Khz. (+/- 1 db, ref. @ 1 Khz.) minimum. • Excellent frequency response utilizing a 80% nickel core providing high permeability combined with low losses. • Designed for maximum bandwidth, lowest distortion at +10 dbm power level. • Plated steel cans. • Adjustable height case bracket. • Net weight 3 oz.

Product Features: • Designed for driver use ONLY in single ended tube output amplifiers. These units replace coupling capacitor circuits for improved sound. • Closed style with minimum 8" long leads. • All models use bifilar wound windings for exceptional coupling and bandwidth. • Minimum frequency response 20 Hz. - 20 Khz (+/- 1 db max. ref. 1 Khz.). • The core is gapped to support the specified D.C. bias current. • Maximum working voltage - 400 VDC. • Units are Hi-Pot tested at 1,000 VDC. • Core uses Hi grade silicone laminations (29M6). • Units weight - 3 lbs. 2 oz.

Product Features: • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits. • Frequency response: 100 Hz. - 15 Khz at full rated power (+/- 1 db max. - ref. 1 Khz). • Open style with minimum 12" long primary and secondary leads. • All sizes use butt stacked cores (using 29M6 steel) with an air gap, reduce • D.C. core saturation. • Primary impedance range from 2,500 to 10,000 Ohms. • Secondary impedance range from 4 to 32 Ohms.

Product Features: • Designed for general purpose or replacement use in push-pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz. (+/- 1 db max. ref. 1 Khz.). • Open style with minimum 10" long primary and secondary leads.

Product Features: • Designed for general purpose or replacement use in push-pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz. (+/- 1db max. ref. 1 Khz.). • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.