Aluminium screws - Import export

Aluminium, nitrile rubber Note: The machine feet with vibration absorption remain vertically and horizontally stable, even in the presence of strong vibrations. Permanent loads are optimally absorbed thanks to the high quality rubber-metal joint. The machine feet can be screwed onto the machine using a threaded spindle. Supplied with Threaded spindle M16X105 is supplied fully assembled as part of delivery. Drawing reference: 1) Shore hardness

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates drylin® trapezoidal lead screw nut - cylindrical nuts with right-hand thread Trapezoidal lead screw nuts made from lubricant-free iglidur® W300, J, J350 and A180. drylin® - trapezoidal leadscrew nuts - WSRM, JSRM, J350SRM and A180SRM drylin® trapezoidal lead screw nut - cylindrical nuts with left-hand thread Trapezoidal leadscrew nuts made from lubrication-free iglidur® W300 and iglidur® J. drylin® - trapezoidal leadscrew nuts - WSLM and JSLM drylin® trapezoidal lead screw nut - flanged nuts with right-hand thread Trapezoidal lead screw nuts made from lubricant-free iglidur® W300, J, J350 and A180. drylin® - trapezoidal leadscrew nuts - WFRM, JFRM, J350FRM and A180FRM drylin® trapezoidal lead screw nut - flanged nuts with left-hand thread Trapezoidal leadscrew nuts made from lubrication-free iglidur® W300 and iglidur® J. drylin® - trapezoidal leadscrew nuts - WFLM and JFLM drylin® Anti-backlash nuts Trapezoidal leadscrew nuts with reduced bearing clearance. Anti-backlash nuts drylin® split lead screw nuts Split lead screw nuts for easy assembly. drylin® split lead screw nut drylin® leadscrew nut - two start two-start lead screws, double stroke in addition to the usual trapezoidal leadscrew nuts. drylin® two-start leadscrew nut drylin® miniature nuts Screw drives ,iniatur lead screw nuts, small sizes. Miniature nuts small sizes drylin® lead screw nuts with spanner flat Ideal transmission of the torque through form fit. drylin® lead screw nuts with spanner flat drylin® disc drylin® disc – eliminate clearance easily at low cost drylin® disc drylin® - Trapezoidal threaded spindle drylin® - Trapezoidal threaded spindle drylin® - trapezoidal lead screws made from aluminum, coated drylin® - Trapezoidal threaded spindle, Aluminium drylin® - Trapezoidal lead screw spindles with pin drylin® - Trapezoidal threaded spindle with pin drylin® - Trapezoidal lead screw spindles reverse Increased flexibility for format adjustments: counter rotating drylin® lead screws. reverse drylin® Zero backlash screw drives Screw drives with steep thread for quick adjustments. Zero backlash screw drives drylin® steep-threaded nuts For quick adjustments as an alternative to pneumatic or toothed belt. Leadscrews drylin® steep thread DST Lubricant-free steep thread DST higher performance in service life and efficiency Steep thread DST drylin® steep-threaded spindles Lubrication-free threaded spindles with high pitches. Steep-threaded spindles drylin® leadscrew nuts made of SHT linear modules Threaded nuts made of SHT linear modules drylin® leadscrew nuts made of SHT linear modules drylin® leadscrew nuts made of SLW linear modules Threaded nuts made of SLW linear modules drylin® leadscrew nuts made of SLW linear modules drylin® leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Floating bearing block for lead screws with ball bearing Useful extension to the drylin® construction kit. Floating bearing block for lead screws with ball bearing drylin® lead screw nut retainer Conveniently use srews to standard lead screw nuts with nut retainers drylin® lead screw nut retainer drylin® spherical trapezoidal lead screw nut To compensate for angular errors in screwed on plates. Spherical trapezoidal lead screw nut drylin® spherical lead screw nut with flange housing spherical trapezoidal lead screw nut, which permits continuous angle adjustments. drylin® leadscre nut with flange housing drylin® spherical lead screw nut with pillow block bearing Spherical lead screw nut with pillow block bearing continuous angle adjustments. drylin® lead screw nut with pillow block bearings drylin® quick-release nut – Fast Forward Fast forward mechanism: A combination of accurate positioning and quick manual adjustment with trapezoidal lead screw nuts. Quick release mechanism drylin® clamping rings drylin® clamping rings - flexible even down to the finest of details, made of coated aluminum. drylin® clamping rings drylin® trapezoidal lead screw nut - cylindrical nuts with right-hand thread Trapezoidal lead screw nuts made from lubricant-free iglidur® W300, J, J350 and A180. drylin® - trapezoidal leadscrew nuts - WSRM, JSRM, J350SRM and A180SRM drylin® trapezoidal lead screw nut - cylindrical nuts with left-hand thread Trapezoidal leadscrew nuts made from lubrication-free iglidur® W300 and iglidur® J. drylin® - trapezoidal leadscrew nuts - WSLM and JSLM drylin® trapezoidal lead screw nut - flanged nuts with right-hand thread Trapezoidal lead screw nuts made from lubricant-free iglidur® W300, J, J350 and A180. drylin® - trapezoidal leadscrew nuts - WFRM, JFRM, J350FRM and A180FRM drylin® trapezoidal lead screw nut - flanged nuts with left-hand thread Trapezoidal leadscrew nuts made from lubrication-free iglidur® W300 and iglidur® J. drylin® - trapezoidal leadscrew nuts - WFLM and JFLM drylin® Anti-backlash nuts Trapezoidal leadscrew nuts with reduced bearing clearance. Anti-backlash nuts drylin® split lead screw nuts Split lead screw nuts for easy assembly. drylin® split lead screw nut drylin® leadscrew nut - two start two-start lead screws, double stroke in addition to the usual trapezoidal leadscrew nuts. drylin® two-start leadscrew nut drylin® miniature nuts Screw drives ,iniatur lead screw nuts, small sizes. Miniature nuts small sizes drylin® lead screw nuts with spanner flat Ideal transmission of the torque through form fit. drylin® lead screw nuts with spanner flat drylin® disc drylin® disc – eliminate clearance easily at low cost drylin® disc drylin® - Trapezoidal threaded spindle drylin® - Trapezoidal threaded spindle drylin® - trapezoidal lead screws made from aluminum, coated drylin® - Trapezoidal threaded spindle, Aluminium drylin® - Trapezoidal lead screw spindles with pin drylin® - Trapezoidal threaded spindle with pin drylin® - Trapezoidal lead screw spindles reverse Increased flexibility for format adjustments: counter rotating drylin® lead screws. reverse drylin® Zero backlash screw drives Screw drives with steep thread for quick adjustments. Zero backlash screw drives drylin® steep-threaded nuts For quick adjustments as an alternative to pneumatic or toothed belt. Leadscrews drylin® steep thread DST Lubricant-free steep thread DST higher performance in service life and efficiency Steep thread DST drylin® steep-threaded spindles Lubrication-free threaded spindles with high pitches. Steep-threaded spindles drylin® leadscrew nuts made of SHT linear modules Threaded nuts made of SHT linear modules drylin® leadscrew nuts made of SHT linear modules drylin® leadscrew nuts made of SLW linear modules Threaded nuts made of SLW linear modules drylin® leadscrew nuts made of SLW linear modules drylin® leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Floating bearing block for lead screws with ball bearing Useful extension to the drylin® construction kit. Floating bearing block for lead screws with ball bearing drylin® lead screw nut retainer Conveniently use srews to standard lead screw nuts with nut retainers drylin® lead screw nut retainer drylin® spherical trapezoidal lead screw nut To compensate for angular errors in screwed on plates. Spherical trapezoidal lead screw nut drylin® spherical lead screw nut with flange housing spherical trapezoidal lead screw nut, which permits continuous angle adjustments. drylin® leadscre nut with flange housing drylin® spherical lead screw nut with pillow block bearing Spherical lead screw nut with pillow block bearing continuous angle adjustments. drylin® lead screw nut with pillow block bearings drylin® quick-release nut – Fast Forward Fast forward mechanism: A combination of accurate positioning and quick manual adjustment with trapezoidal lead screw nuts. Quick release mechanism drylin® clamping rings drylin® clamping rings - flexible even down to the finest of details, made of coated aluminum. drylin® clamping rings Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

robolink®-based joint: Bearing ring rotation on the basis of PRT-01-50 iglidur® J gliding elements rotating on aluminium HC Weight: 1.250 g max. load: privot 20 Nm, rotate 10 Nm Pivoting angle: 180° (± 90°) Rotation angle: 180° (± 90°) Material: Fine polyamide PA 2200, VA screws, Dyneema ropes, aluminum HC bearing (alternativ iglidur® J) A = privoting ±90° B = rotating ±90°

robolink®-2-axial joint: Weight: 400 g max. load: pivoting 12 Nm, rotating 5 Nm Pivot angle: 180° (+180°/0°) Rotation angle: 340° (± 170°) Material: Fine polyamide PA 2200, VA screws, Dyneema ropes, aluminum HC bearing (alternativ iglidur® J) A = rotating ±270° | B = pivoting ±180° - 0° C = rope run

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

Material: Aluminium. Version: Bright. Flat seal asbestos-free. On request: Cap marked OIL. Drawing reference: 1) flat seal

Mounting plate steel/plastic. Monitor bracket aluminium. Bearing washers and sleeves plastic. Mounting flange aluminium. Mounting adapter aluminium. Screws steel. Version: Mounting plate painted. Monitor bracket painted. Mounting flange painted. Mounting adapter painted. Screws electro zinc-plated

Housing steel. Viewing glass thermoplastic polyamide. O-ring and flat seal rubber (NBR). Reflector aluminium. Screw and hex nut steel. Version: Housing painted black. Transparent viewing glass, high mechanical stability, non-ageing, temperature resistant with oil up to 100 °C, with water up to 70 °C. Reflector painted white, markings and scale black. Screw and hexagon nut, electro zinc-plated. Note: The oil level gauges can either be fastened as shown in the illustration or directly in the threaded hole. Centre distance for the fastening holes = L1 ±0.5. The oil level gauges are suitable for tanks operating without pressure. Maximum operating temperature: 100 °C.

Housing aluminium. Worm screw steel, worm wheel special brass. Version Housing anodised. Ball bearing with rubber sealing washer RS. Note Universally applicable and maintenancefree worm drive in one size with a centre distance of 20 mm and 7 different ratios. The housing is sealed to prevent grease leakage and keep dust out. These are left hand worm gears. The rotation direction on the shaft is arbitrary. smooth power transmission simple screw fastening quiet Note FR permissible radial force at FA=0 FA permissible axial force at FR=0

Angle diecast zinc. Screws and slot nuts steel. End cap polyamide, fibreglass reinforced. Version Angle painted aluminium tone. Screws and slot nuts electro zincplated. End cap black. Note Suitable for reinforcing profile constructions and for frictional connection of profiles with each other without machining. Can also be used as fastening element (e.g. bracket) for any components. The angles have centring lugs for accurate and twistproof mounting. The centring lugs can be removed if necessary by breaking off i.e. for mounting plates. The open side can be closed off with the end cap.

Elastomer spider polyurethane Shore 98A. Coupling housing and clamping hub, aluminium. Expanding mandrel steel. Screws steel. Centring rings 1.4301 stainless steel. Version Coupling housing black anodised. Note The motor adapter set with elastomer dog coupling system (elastomer coupling with expanding mandrel) provides a simple and costeffective solution for connecting electric motors. Advantages of the elastomer dog coupling Hub with expanding mandrel can be mounted axially Playfree with vibration absorption Excellent retaining force Excellent concentric accuracy Short design Easy to assemble Can be mounted axially on spigot side Electrical insulation Nominal torque up to 30 Nm On request Larger hub bore D. Higher nominal torque.

tube cap screw material: aluminum alloy 6061-T4 finish: clean and deburred external thread: 1/2-20 UNF 2A size: external diameter 0.750 +/-0.015 inch, length 1.125 +/-0.015 inch socket hex incircle diameter 0.390 +0.010/-0.000 inch, depth 0.31 inch, to accept 3/8” hex key Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

The automatic single-head cappers are designed to apply aluminum caps or screw-on and snap-on plastic caps to glass or PET bottles. All closure heads are made entirely of stainless steel, as well as most of the machine components. The speed variation is electronic, controlled by an inverter. Other capping systems are available to meet different needs: cork, crown, twist-off. It is also possible to combine 2 turrets on the same machine with different combinations, for example, screw cap + cork, cork + crown, screw cap + T-cork. The range of single-head cappers is designed for productions of up to approximately 2,500 bottles per hour and can be integrated with automatic cap feeding systems of both mechanical and pneumatic types.

The semi-automatic capper model 'TSP' is suitable for applying aluminum (or plastic) screw caps to glass bottles. This semi-automatic machine is made of stainless steel and features a pneumatic bottle lifting system. The caps are manually placed on the bottle, while the operation cycle is activated with 2 buttons on the side of the machine. The machine operates electrically with a contactor and CE-compliant safety guards. After the cap is threaded and sealed, the platen automatically descends, allowing the removal of the capped bottle and replacing it with another to be closed. The capping head has 4 stainless steel rollers and comes with a No-Cap No-Roll safety device, suitable for all types of closures, including Stelvin 30x60 caps. It is suitable for all standard bottle sizes ranging from 25cl to 150cl. A magnetic friction head is available for pre-threaded plastic caps or twist-off caps. Production capacity: approximately 600 bottles per hour.

These cappers are designed for closing aluminum or plastic screw caps, or crown caps, on cylindrical or shaped bottles. Caps feeding is done using a centrifugal, rotary, or vibratory feeder, and the transfer of the caps is achieved through a descending channel that ends with the distribution head. The stainless steel threading heads with 4 rollers (with 'no cap/no roll' device) allow for excellent threading and capping of a wide range of caps. Standard features include: - Centrifugal Feeder - Inverter for speed adjustment - PLC for cycle control - Production display and anomaly signaling - Bottle height format management from PLC - 2 photocells on the cap descent channel - Photocell for exit accumulation control on the conveyor belt - Inlet selection screw - Safety guards and stainless steel electrical panel - Electric lifting of the capping head Production capacity: from 3,000 to 12,000 bottles per hour.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Top and bottom made from 12 gauge aluminium finished in beige. • Top and bottom are attached to an internal aluminium extrusion which contains mounting slots for printed circuit boards or panels. • Front and rear panels are natural aluminium (paper coated one side) which are attached with screws to the aluminium mounting extrusion. • Panels can be easily removed for access to components. • Tops and bottoms are available in solid or with vent slots. • All hardware and self-adhesive rubber feet are included. • Replacement hardware packages include front panel screws, side screws, extrusions, and rubber feet.

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: suitable for auto windscreen adhesive, hybrid adhesive ... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electric cabl

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: suitable for auto windscreen adhesive, hybrid adhesive... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electr

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical drops. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked Packaging DynamicMax Type HPS-6T-10.8V Li-Ion 1 pc. Li-Ion battery pack 10

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn