• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • aluminium housings

Results for

Aluminium housings - Import export

Distributor

France

Verified by Europages

Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°

Request for a quote

France

Verified by Europages

The readytoinstall compact linear housing consists of extruded aluminium housing, installed linear ball bearing 2151102 and doublesided seal. Recommended shaft tolerance h6. Load rating according to specification of the linear ball bearing. With lubrication hole M8x1. Accessory Precision guide shafts 21595. Fastening screws 07160.

Request for a quote

France

Verified by Europages

Housing, steel. Magnetic core AlNiCo. Hard magnet in aluminium housing and steel jacket. Shielded system. Pot magnets are used for retaining, lifting and mounting in fixtures. Due to the painted surface, the diameter D can be up to +0.8 mm.

Request for a quote

Germany

Verified by Europages

Workbench mounted Torque Transducer. Crane’s stationary transducers are the quality choice for the testing of all continuous drive, impulse and hand torque tools in the workshop and production line-side environment. For best results with impulse tools we recommend the use of a Crane CheckStar rotary torque transducer with a suitable joint kit rather than a stationary transducer. Stationary transducers are used off the production line in workshop or line-side test stations. Combined with joint kits that represent the production joint condition, the stationary transducers form an effective off line test for verification of assembly tool performance. Key Features: - Static accuracy ± 0.25% FSD (bi-directional) - Plug and Play with Crane display systems (UTA) - Combine with joint kits for workshop simulation of hard to soft joints - Built-in workbench mounting flange - Rugged and durable construction, aluminium housing, stainless steel shaft - Ingress protection rating IP40.

Request for a quote

France

Verified by Europages

Housing aluminium. Precision tube nickel plated steel. Trapezoidal thread spindle steel. Note The doubletube linear actuator can be operated manually or electrically. Due to the short duty cycle, the units can be adjusted several times a day at low speed and with high stability. Width, length and height adjustment possible.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

France

Verified by Europages

Body, extruded aluminium section. Bearing housing and slide, aluminium. Profile guide rail and guide carriage, steel. Toothed belt, polyurethane with steel cord reinforcement. Version Body natural colour anodised Bearing housing and slide, black anodised. Tracks of the profile guide rail, inductively hardened and ground. Note Compact and flexible linear actuators with toothed belt drive. The body consists of a selfsupporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is lowwear, and is optimised for moving large masses. Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper Tslot. The aluminium profile is fully compatible with our standard I series profiles.

Request for a quote

China

Verified by Europages

spindle end housing manufactured by CNC turning and milling 4 thread holes chamfered on both sides, thread grade M3.0 free of burrs cap end external diameter: 30.50 +0.05/-0.00 mm bottom end external diameter: 14.60 +0.10/-0.05 mm height: 17.50 +/- 0.03 mm material: aluminum alloy ASTM 6061-T6 With sliding head multi-axis CNC lathes, we are capable of producing complex parts requiring turning, milling, drilling, tapping, broaching etc in one setup.

Request for a quote

Germany

The DKRF670 Series by Driesen + Kern GmbH was developed for measuring humidity related parameters especially in industrial applications. All models have a relative humidity measuring range of 0...100%RH and can also measure temperature. Calculated variables such as absolute humidity (g/m3), dew point (°C), mixing ratio (g/kg) are optionally available. The series' measurements are very accurate for humidity (up to +/-1.8%RH) as well as temperature (up to +/-0.1K). An ISO9001 traceable certificate is included in delivery. Three analog output signals are provided for a customer-specific combination of the chosen parameters (relative humidity, temperature, absolute humidity, mixing ratio, dew point). Analog signals can be 0..1/0..5/0..10VDC, and also 4..20mA three-wire. The transducer's electronic circuits are integrated in a robust aluminium housing that is protected against dust and splash water according to protection class IP65, which makes the devices well suited for use in wet...

Request for a quote

United Kingdom

The SPECTRAN V6 range is Aaronia's latest generation of high-performance real-time spectrum analyzers. The SPECTRAN V6 comes with 300GHz/s sweep speed. Any number of devices can be cascaded to achieve an even higher real-time bandwidth. Thus, by using only four SPECTRAN V6 instruments, real-time bandwidth of 480MHz is already achieved! The included software RTSA-Suite PRO is precisely tailored to the powerful and robust hardware and supports the use of multiple SPECTRAN V6. The stackable aluminium housing facilitates the parallel use of several units.

Request for a quote

Austria

The LF-TA transmitter of Schaller measurement instrumentation, with its robust and easy to mount aluminium housing, is best suited for all applications in this field. For temperatures of up to 60°C for laboratory, climate control and drying technology, wood processing industry, food and animal feed industry, building industry, printing and paper industry, agriculture, biotechnology and pharmaceutical industry.

Request for a quote

France

Domino Sign Dmax3 RGB is specially used for the lighting of large letters, 3-sided PMMA type housing, or aluminum edges and diffusing face. It can also be used for backlighting.

Request for a quote

Germany

Extruded Stator housings made of aluminium frame 56 to 132 for individual drive solutions such as servo-motors, circular saws or - if required - extra long housings. Available from existing stocks are various profiles at a length of 3000 mm or cut to customized length.

Request for a quote