Results for
NORELEM FRANCE
France
Sprocket steel. Ball bearing chrome steel. Screw and nut steel. Version Sprocket teeth hardened to HRC 50, electro zincplated. Ball bearing with sealing discs 2ZC3. Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The sprocket set can be combined with all tensioning elements to form a readytoinstall chain clamp. The ball bearings are sealed both sides, permanently lubricated and maintenancefree. The sprocket can be moved on the screw and thus adapted to the chain track. With the duplex and triplex version, precision spacer sleeves ensure correct chain guidance. Rigid mounting without a tensioning element is also possible. Can also be used as an idler sprocket.
Request for a quoteNORELEM FRANCE
France
Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.
Request for a quoteNORELEM FRANCE
France
Housing Form A plastic. Housing Form B die-cast zinc alloy. Active face POM. Housing Form C high-alloy stainless steel Version: Voltage: U = 10 – 30 V DC Function: Normally open Switch type: PNP Mounting type: flush Security type: IP 67 Note: Non-contact, functions wear-free with high switching frequency and accuracy. Non-sensitive to vibrations, dust and moisture. Inductive sensors record all metals without contact. Form C enables screw fastening in a T-slot. Is safe and saves space as the proximity switch lays flush in the slot. Short-circuit proof and reverse-polarity protected.
Request for a quoteCUPASO DEUTSCHLAND GMBH
Germany
Volumetric cup fillers enable the volumetric dosing of granular products. They can be fitted to all models of vertical form fill and seal machines and are offered in two series: 6 cups or 12 cups. Both models are equipped with a feed hopper with controlled outlet, a product level sensor, a series of cups made of food-grade material, a fixed lower cup carrier and, in automatic mode, a height-adjustable upper cup carrier with cup level sensor. The product is unloaded by gravity at the inlet of the packaging machine and, for fine products, the unloading system is equipped with a flap that prevents the product from spilling.
Request for a quoteVALDAMARK LIMITED
United Kingdom
Cortec VpCI® 369 is a top-tier, easy-to-use coating safeguarding outdoor metal equipment and structures. Leveraging Cortec's advanced Vapor phase Corrosion Inhibitors (VpCI®), this versatile coating defends multiple metals with a single product.VpCI® molecules, vaporising from the coating and condensing on metal surfaces, create an invisible, self-renewing protective layer.This combat corrosion in all forms, from galvanic to atmospheric and salt spray.Protecting steel, cast iron, copper, brass, aluminium, and galvanised steel, VpCI® 369 is ideal for diverse outdoor applications, from heavy machinery to storage tanks. Engineered for harsh outdoor conditions, this tough, flexible coating resists moisture, UV rays, and weathering.Applicable on both new and rusted surfaces, it forms a durable anti-corrosion barrier.Unlike traditional coatings, no rust removal or extensive prep is needed, making it efficient and cost-effective.
Request for a quoteTECHNIC MACHINES
Turkey
As Technic Machines, we supply all kind of roll forming machines. We have in our portfolio some standard roll former machine lines but also we provide customs solutions for our customers Roll former machine is pretty common machine in metal industry and each work can have small differences because of the local market demand on roll forming shape. We provide exact solution for our customers with different width, thicknesses and shapes of roll forming. We supply for our customers as standard roll form machine, Customs Roll Former Machine Glazed and Step Tile Making Machine Roof Panel Roll Forming Machine Trapezoidal Sheet Roll Forming Machine Corrugated Sheet Roll Forming Machine Rolling Shutter Roll Former Machine Drywall and Gypsum Channel Making Machine Just contact with us for your other roll forming machine request, we will provide customs solution according to your roll former machine research.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
BC-TAB-C-2MM-H17 The circular spacer tabs, BC-TAB-C-2MM-H17, 2 mm thick and 17 mm high, are fixed by pressure on the BUZON pedestals of the BC range. The spacer tabs regulate the spacing between the pavers, ensure alignment, and free water drainage. These are circular and adapt perfectly to all forms of paver and allow the installation of terraces with geometric patterns. The format (2 mm x 17 mm), especially for the laying of thick pavers (minimum 20 mm) with standard dimensions (minimum 40 cm). Different layers available.
Request for a quoteECONOMIC COOPERATIVE DOO
Serbia
Vigour of the tree is medium strong, and branches have a medium spreading growing habit. It is suitable for all types of tree forming and growing systems. Flowering is mid-late and is a good pollinator. POLLINATORS: Conference. FRUIT APPEARANCE: Shape is conical, elongated. Skin is thin, smooth, glossy with a green-yellow base color, yellow-bronze overlay, with possible pink blushes on the sunny side. The flesh is white-yellow in color, soft, juicy. Taste is sweet, with possible sour notes. FRUIT SIZE: Medium-large to large. HARVEST: Second half of September.
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteTHE GOURMET CORP
Spain
Our Iberico meats exhibit textures and flavours that attest to our carefully supervised production cycle. Whether for the hotel industry or the consumer, why not enjoy the Iberico pork in all its forms?
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
STRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP A 042 Round pin inserter Description The Streckfuss inserting device Type A 042 offers the economical solution, for the mechanised insertion of round pins, solder posts and or - lugs into p. c. boards. With this device, nearly all customer forms of round pins, solder posts / - lugs can be processed. The loose components are filled into the sorting pot of the vibration conveyor. Trough barriers in the helical of the conveyor, the components are ordered. After positioning, the components are handed to the loading slider, which supplies the components to the inserting tool. Working with this device is save and easy: For assembling, hold the p. c. board with both hands on the edges, and place it under the inserting tool. The p. c. board now lies at the bottom of the pressure stamp, while the tooling pin hole is placed directly under the solder post / - lug shaft looming out of the inserting tool. This has the function of a locating pin. The p. c. board is lifted parallel, so the components shaft enters the tooling pin hole. The insertion process is triggered by a foot switch. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 069 Cutting, stamping and bending device for radial components The Cutting and Forming Machine for horizontal & vertical Mounting and tube to tube feeding. The cutting and forming machine Type C 069 is designed to cut and form components with 3 up to 23 leads for vertical or horizontal mounting. The feed magazines and die sets are modular in design to allow quick set up changes. All cutting and forming parameters are manufactured to customer specification. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 069/G Cutting, stamping and bending device for radial components Description To eliminate belt- tolerances the Streckfuss machine Type C 069 G was developed with an integrated touch- facility. With this all usual in the trade component- belts which meet the IEC- Norm can effortless be processed. The component is formed and cut with a maximum tolerance of ± 0,1 mm. The supply of components is exclusively done by reel. For this the machine has a combined location for reel and amo- pack. To save set- up time all necessary toolkits for specific formings are mounted in one unit. These toolkits can be inserted or exchanged within a very short time. When inserting a toolkit the driving- mechanism automatically will be locked. The machine is prepared to keep 2 processing- units. One unit performs upward formings and the other performs downward formings. After the components have been formed and cut they are ejected into a bin for collection. Components
Request for a quoteResults for
All forming - Import exportNumber of results
21 ProductsCompany type