Abrasion materials - Import export

iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]: iglidur® clip bearings are especially intended for the shaft bushing through plates. For this reason the bearing has a flange on each of the two front sides. After the clip-on the bearings are secured on both sides in the plate. The clip bearings have chamfered slot on the side that enables the mounting of the bearing on one side. After the mounting the bearing straddles and lines the bore in the plate. The shaft prevents the clip bearing from slipping out of the bore. The bearing cannot slip out of the bore even in axial movements. Extremely simple mounting through lateral slot Maintenance-free and self-lubricating Good flexibility in punch hole Good abrasion resistance Quiet operation Suitable for rotary and linear movements Extendibility through the slot Undetachable through double flange Special dimensions possible Plate thicknesses from 3 mm to 4 mm available from stock Material: iglidur® M250 Special properties of the iglidur® clip bearings iglidur® clip bearings are made from the most abrasion-resistant material, iglidur® M250. iglidur® M250 is a bearing material for rugged, wear-resistant bearing systems for medium loads. The bearings are self-lubricating and can be used dry. If required the bearings can also be lubricated. The material iglidur® M250 is resistant to all common lubricants. The iglidur® clip bearings are the ideal solution for bearing functions with low loads. The easy mounting makes it ideal for applications with difficult bearing locations. Compressive strength The permitted static surface pressure of iglidur® M250 amounts to 20 MPa at room temperature. Due to the good adaptability to uneven surfaces of the bearing housing, a high pressure load capacity of the clip bearings persists even in punched holes. For the most small bearing surfaces, the good vibration dampening properties and the insensitivity to misalignment are of primary importance. Surface speeds Clip bearings are particularly wear resistant in slow rotating, oscillating and axial motions. You can find the maximum gliding speeds for the various motions for the iglidur® M250 material under the materials data link shown below. A lubrication at installation or continuous lubrication raises the permitted surface speeds. Clip bearings are available from stock in dimensions of 3 to 25 mm. Fixation Triflex RS For mounting, the bearings are laterally pressed together with the large flange. The chamfered slot makes the bearing spiral-shaped, whereby it can be easily inserted in the plate. The remaining slot in the attached clip bearing can compensate for linear expansions of the circumference. Thus narrow bearing clearances are possible with clip bearings. The bearing clearance is dimensioned in such a way that in a housing bore with a nominal diameter, a shaft made with the same nominal diameter turns easily. The clip bearing can be used in H-tolerance housings up to H13. The turning of the clip bearing in the bore is also permitted. Operating temperatures The wear resistance of the iglidur® clip bearings are excellent with operating temperatures till 80°C. Even at low temperature the bearings remain elastic and abrasion resistant. When to use it? When a sheet metal feedthrough is required When the bearing should be captively clipped on in a drill hole with rough tolerance For rotating, linear and pivoting movements When a quick-mounting bearing solution is sought Clip bearings application examples When not to use it? When constant temperatures of more than +80°C occur iglidur® G When a high-precision bearing is needed iglidur® J When the housing bore is more than 4 mm long iglidur® Clips 2 iglidur® MKM When very high surface pressures occur iglidur® G iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]:

Spectrophotometer, For continues In– Line colour measurement Description Colour measurement based on the standard CIELAB. Continuous onlineidentification of colours and indication of the deviation from the colourstandard. Colour determination of products with smooth and planar surfaces, no abrasive bulk material. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a difficult accessible places. This ensure the easy handling. With the easy to use calibration function (calibration button), our customer can take spectra's for the calibration with the calibration button at the measurement place and read the internal stored spectra's with the calibration software. Due to this function and the open calibration system our customers can expand independent an existing calibrations or create new calibrations.

Acrylic foam tapes are engineered to provide assembly solutions for a wide variety of industrial applications. These high performance tapes are ideal for replacing mechanical fasteners, liquid adhesives, spot welds and other permanent fasteners. Acrylic foam tapes create permanent, reliable bonds to a variety of substrates including metals, glass, plastics, composite materials and painted surfaces. They are able to maintain adhesion at sub-zero temperatures, accommodate thermal movement and will not absorb moisture or become brittle with age. All our products are flexible and comformable. Key benefits: Long lasting strength Excellent sealing properties Resistant to Ultra Violet light Reduce labour and material costs Abrasion, corrosion and moisture resistant No pull through, dimpling, rivet or well distortion Suitable for indoor and outdoor environments Bonds dissimilar and low energy substrates Excellent ageing and weathering properties Dampens vibration and noise

Acrylic foam tapes are engineered to provide assembly solutions for a wide variety of industrial applications. These high performance tapes are ideal for replacing mechanical fasteners, liquid adhesives, spot welds and other permanent fasteners. Acrylic foam tapes create permanent, reliable bonds to a variety of substrates including metals, glass, plastics, composite materials and painted surfaces. They are able to maintain adhesion at sub-zero temperatures, accommodate thermal movement and will not absorb moisture or become brittle with age. All our products are flexible and comformable. Key benefits: Long lasting strength Excellent sealing properties Resistant to Ultra Violet light Reduce labour and material costs Abrasion, corrosion and moisture resistant No pull through, dimpling, rivet or well distortion Suitable for indoor and outdoor environments Bonds dissimilar and low energy substrates Excellent ageing and weathering properties Dampens vibration and noise

Application: ➢ Water-soluble paints, primers, varnishes ➢ Paste-like putties, solutions, plasters ➢ Adhesives and sealants ➢ Tinting pastes ➢ Insulation solutions ➢ Self-leveling ground material ➢ Tile sealant ➢ Construction ➢ Insulation materials ➢ Production of san products.hygiene ➢ Rubber, plastic, plastics ➢ Welding electrodes and fluxes ➢ Cleaning and abrasive materials ➢ Agrochemistry ➢ Filter media ➢ Decorative coverings

germanLine® Black 60 mit CN-Schicht Applications: Standard quality with extremely high performance in wear resistance. For rough abrasive material and great heights of drop. germanLine® Black 60 shows excellent tear and tensile strengths. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: black Density: 1.10 ± 0.03 g/cm³ Hardness: 60 ± 5 ° Shore A Tensile strength: ≥ 20 MPa Elongation at break: ≥ 450 % Abrasion: ≤ 90 mm³ at 10 N Breaking force: ≥ 80 N/mm Downloads: Technical Data Sheet germanLine® Black 60 with CN Layer - English [PDF]

germanLine® Black 60 mit CN-Schicht Applications: Standard quality with extremely high performance in wear resistance. For rough abrasive material and great heights of drop. germanLine® Black 60 shows excellent tear and tensile strengths. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: black Density: 1.10 ± 0.03 g/cm³ Hardness: 60 ± 5 ° Shore A Tensile strength: ≥ 20 MPa Elongation at break: ≥ 450 % Abrasion: ≤ 90 mm³ at 10 N Breaking force: ≥ 80 N/mm Downloads: Technical Data Sheet germanLine® Black 60 with CN Layer - English [PDF]

Abrasives: Shot(grit) blasting material(range of S-type, GH-types) according SAE&ISO Standards. Types: S230, S280, S780, S390, S550(Low-carbon), S780, S390, S550(Low carbon), S330 (Low carbon), S550, S170(Low carbon), S460 (Low carbon), GH25, GH40, GH50. High quality from Ukraine manufacturer