Direction fire - Import export

Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Because in comparision to direct fired gas or oil heaters dont consume oxygen and produce no combustion gases, they are well suited for temperature management of unheated inside rooms, workshops or garages. Thanks to the integrated thermostat control the produced warm air flow can be adjusted continuously to the desired temperature. If needed, the heating elements of the TDS 30 R switch on thermostatic controlled additional to the constant fan. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 R is suitable for uses in enclosed rooms Easy transportable and easy to use

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

TDS 50 Electric Fan Heater The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continously adjusting the desired temperature. In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series dont consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 50 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. All oil fired indirect IDE devices take place with help of a Danfoss® injection pump. As well, these models have an easy reachable fuel filter on the outside. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

IDS 20 D Oil Fired Direct Heater The IDS 20 D shows mobile heating power with 100 % effectiveness - exactly where you need it. It is completely made in Europe and it is the perfect fit for heating stables with high air flow or construction sites in the winter. Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 20 D: Heating capacity: 20 kW Air flow: 350 m³/h Input voltage: 230 V / 50 Hz Current consumption: 1 A Fuel consumption max.: 2.04 l/h Tank capacity: 17 litres Length x width x height: 720 x 300 x 450 mm Weight: 20 kg

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

ECD "Tiras 1X" is intended to control one direction of fire extinguishing (gas, powder, aerosol). It can operate in autonomous mode or as part of fire alarm systems "Tiras PRIME" or "Tiras PRIME A".

The versatile solution of two types of cooking: direct, indirect or both. The fire can be lit directly in the brazier inside the cooking chamber, or in the combustion chamber below. By inserting a grill into the cooking chamber itself, a second surface is obtained for the simultaneous insertion of multiple trays. The fire can therefore be lit directly in the cooking chamber or in the separate combustion chamber or simultaneously in both depending on preference, with the advantage of keeping, in the latter case, the hob hotter for longer. Stainless steel fronts – Glass on cooking and combustion chambers – Flap doors Shovel and shovel holder kit options

The versatile solution of two types of cooking: direct, indirect or both. The fire can be lit directly in the brazier inside the cooking chamber, or in the combustion chamber below. By inserting a grill into the cooking chamber itself, a second surface is obtained for the simultaneous insertion of multiple trays. The fire can therefore be lit directly in the cooking chamber or in the separate combustion chamber or simultaneously in both depending on preference, with the advantage of keeping, in the latter case, the hob hotter for longer.Black painted structure – Double combustion system – Glass on cooking and combustion chamber doors Kit of shovels and shovel holders and stainless steel side worktop.

This high-quality, self-adhesive PVC floor plank set consists of 20 planks, each measuring 30.5 x 30.5 cm, giving each set a total surface area of ​​1.86 m². These PVC floorboards appear to have an authentic, natural texture thanks to the unique patterns, while offering more durability and requiring less maintenance. These planks are mold and allergy resistant, anti-static, fire-resistant, waterproof, anti-slip, etc. These PVC planks can be easily installed on all kinds of solid and flat surfaces thanks to their self-adhesive backing. These planks comply with European directives, such as fire tests (EN 13501-1), light fastness (ISO 105-B02), wear resistance (EN 660-2), anti-slip (DIN 51130), resistance to flaking (ISO 24345), resistance against dents (ISO 24343-1), and much more. Color: brown. Material: PVC. Dimensions (per shelf): 30.5 x 30.5 cm (L x W). Total area: 1.86 m ². Thickness: 1.5mm.

We , Boran Reklam Ltd., provide safety warning signs solutions all over the world. Quality is the important part for us. We use 4 mm. composite panels for our signs. Special protection system has been developed to increase life time of UV printing. Also we have different solution such as 1 mm. aluminium for warning signs. Aluminium has been fired up to 200 celcius degree for resistance. Our printing is water-based and there is no any health issue while printing, finished product. Our printing has waterproof for hard weather conditions. Category of the sign: 1.Site Safety Signs prohibition signs , warning signs, mandatory action signs, prompt signs 2.OSHA Signs Danger signs, Warning signs, Caution signs, Notice Signs 3.IMO Signs Safety signs, Direction signs, IMO Fire control signs, Prohibition signs, Mandatory signs, Fire signs, Warning signs, Hazardous goods signs, IMO signs with text, ISPS signs

Four-sided, metal fire protection duct to install and route cables. With intumescent inner lining. In the event of fire, it prevents the spread of fire in the duct and protects emergency and escape routes against the impacts of a cable fire. Direct wall and ceiling mounting, mounting possible beneath system floors or on support systems. Tested and approved as an I duct according to DIN 4102 Part 11. General construction approval for fire resistance classes I30 to I120. Pre-terminated fittings available. Only pre-terminated fittings that match the description in the approval may be installed with the fire protection duct. Safe connection of duct base and removable duct cover through integrated locking brackets. Toolless mounting. Multiple mounting and dismantling of the cover possible. Equipotential bonding created using locking brackets.

Four-sided, metal fire protection duct to install and route cables. With intumescent inner lining. In the event of fire, it prevents the spread of fire in the duct and protects emergency and escape routes against the impacts of a cable fire. Direct wall and ceiling mounting, mounting possible beneath system floors or on support systems. Tested and approved as an I duct according to DIN 4102 Part 11. General construction approval for fire resistance classes I30 to I120. Pre-terminated fittings available. Only pre-terminated fittings that match the description in the approval may be installed with the fire protection duct. Safe connection of duct base and removable duct cover through integrated locking brackets. Toolless mounting. Multiple mounting and dismantling of the cover possible. Equipotential bonding created using locking brackets.

MODSTEEL Ready-made wall panels are a newly invented wall block technique that is easy to use when building prefabricated homes as well as conducting interior space re-shaping in homes or workplaces. It can also be used in sheathing building walls in a safe and almost effortless manner. Our ready-made wall panels do not require lots of workmanship as it can be easily customized and cut into different shapes and sizes. Specifications The main components of the ready-made walls are gypsum board frames from each side that is then filled with expended polystyrene (EPS) a material that increases the insulation level of the wall. We also use a light cemented foam filling instead of traditional concrete in order to have better heat and sound insulation. The walls are totally fire proof even when exposed to direct fire which makes them a very safe choice for homes and places that include children, elderly and valuable material every panel weighs 350kg/m3.