Devices - Import export

Enjoy the versatility of USB Type-C compatible cables. You can use different types of cables to charge the different mobile devices you have. Just plug in the cable - no need to change the charger in the socket. Charge your devices the way they deserve. Enjoy fast 15W charging for USB-C devices that support a variety of technologies. Protect your devices against overload, short circuit and high temperature. Charge them safely even in unstable electrical conditions without worrying about interference and leakage current.

Measuring groove widths for selecting locking ring classes

To sustain the high degree of camera performance, we expanded our portfolio by adding components and devices that facilitate a more holistic system assembly. All of our standard accessories are tested and verified for quality, fit, and performance. These are comple mented by task orientated, specialized components for multi-camera aggregation, signal multiplexing, synchronization, and the interconnection with various processing hosts. For embedded applications, compact computing solutions with dedicated carrier boards complete the system configuration

A locking device is a mechanical component that prevents mated shafts and other machine elements from moving out of position when subjected to external forces. Operating conditions such as initial installation error, temperature changes, vibration, and others can all cause problems. These are critical components. Our locking devices consist of two interlocking conical rings used in the connection of power and motion transmission organs such as chain hoists, pulleys, sprockets, sprockets, timing gears, couplings, etc., without using wedges. It can transfer low pressure and high torque, and can be installed and disassembled quickly and safely. They are machine fasteners that strongly fix the shaft passing through them and the hubs passing around them by pushing each other in opposite directions by tightening the bolts on the piston rings.

EV443 is a device that sanitizes the air in closed environments, promoting its exchange. It is based on the activity produced by Titanium dioxide (TiO2). Activated by the visible light generated by an LED board, it starts the oxidative photocatalysis process which breaks the chemical bonds of viruses, bacteria and polluting molecules present in the air, destroying them.

*12.1 ”High resolution display (optional touch screen) *8-channel waveform display *3-stage audible and visual alarm security *200 min internal battery *Wireless module (optional) *ECG, RESP, SPo2, PR, NIBP and Temperature measurement probes compatible *Design with portable handle *Suitable for bedside use *Storage of patient information thanks to internal memory

The AD8639ARMZ is a precision instrumentation amplifier from Analog Devices. It offers low offset voltage performance of 3uV, rail-to-rail output, and a high voltage gain of 136 dB. The GBP Gain Bandwidth Product of the device is 1.5 MHz, and the PSRR Power Supply Rejection Ratio is 143 dB. The device operates with a supply current of 1.25 mA and an input bias current of 250 pA. The device is offered in an SMD/SMT VSSOP-8 package with a maximum temperature rating of +125 C.

The ADG1206YRUZ is an integrated circuit (IC) analog switch, multiplexer, and demultiplexer from Analog Devices. It is part of the ADG1206 series and is housed in a TSSOP-28 package.

The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components.

The ADI DSP (Digital Signal Processor) ADSP-BF561SKBCZ-6V is a powerful and reliable processor designed to meet the needs of a wide range of applications. This 600MHz surface mount external processor features a 328kB memory and a 0°C ~ 70°C (TA) operating temperature range. It is equipped with a Blackfin® 256-CSPBGA (12x12) fixed point digital signal processor, making it ideal for applications requiring high performance and accuracy. The processor also features a wide range of peripherals, including USB, Ethernet, and CAN interfaces, as well as a variety of analog and digital I/O. This processor is designed to provide reliable and efficient performance in a wide range of applications, from industrial automation to consumer electronics. With its high performance and wide range of features, the ADI DSP ADSP-BF561SKBCZ-6V is an ideal choice for any application requiring a powerful and reliable processor.

A variety of external analog and digital input devices can be integrated in a KVM solution using a Converter Analog to USB. The Converter Analog to USB converts outputs from analog and digital throttles, steering wheels and buttons to USB signals. Thus, the Converter Analog to USB can be used when relocating workstations to a centralized system room and extending the control signals of a variety of devices. It is fully compatible with the WEYTEC distributionPLATFORM. At a glance Convert analog joystick signals to USB Also supports digital input signals (e.g. buttons) Map to X, Y and ZAxis or joystick buttons Compact and modular design, appropriate for high density installations Compatible with all other IP Remote products Fully compatible with the WEYTEC distributionPLATFORM (WDP)

NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.

Raised access floor box 9912T with a device carrier, frame and removable lid made of solid aluminum anodized in natural aluminum. The housing is made of sendzimir galvanized sheet steel. A covering 8 mm thick can be embedded in the lid. Further equipment variants on request.

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

Established in 2008, NPCore has emerged as a rapidly expanding company in Korea.It specializes in delivering cutting-edge, AI-based solutions to combat new and evolving malware threats, particularly Advanced Persistent Threats (APTs). Renowned for our exceptional product performance and unwavering commitment to quality, NPCore is swiftly gaining recognition as a leading information security firm in Korea. Building upon our success in the domestic market, NPCore is now poised to expand its operations and distribution networks internationally. As part of this strategic expansion, we have already initiated the establishment of a joint venture in Vietnam. This endeavor exemplifies our dedication to reaching new markets and signifies our ambitions to become a global enterprise.In this pursuit, NPCore actively seeks partnerships with distributors, viewing it as an excellent opportunity to forge strong relationships with the Southeast Asian market, encompassing ASEAN countries.

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

Hold-down device for FERRUM DM farm loader / wheel loader adjustable tine width requires 3rd control circuit Recommended for the models: Wheel loader Ferrum DM308 x4 V2 Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

Based on a individual needs assessment we tailor-make briquetting solutions including peripheral devices. RUF lifting and tilting devices optimize and automatize the flow of bulk materials. RUF can consider any individual customer needs.

Dr. White Smart Teeth Whitening Device is 10 times more effective in whitening your teeth thanks to its special rays.

Experiencing excessive vibrations in sensitive mechanical structures or rotating machinery? Tuned Mass Dampers (TMD) and Tuned Mass Absorbers (TMA) provide a simple and effective solution to reduce them. TMA and TMD are mechanical resonant devices used to suppress or absorb vibrations. When installed properly on a machine or structure, they draw away vibrational energy from the structure or machine and dissipate it internally, hence reducing their motion. They do not require a redesign of the target structure/machine and do not interfere with the main structure/machine function. This makes them an ideal solution for existing machine retrofitting/troubleshooting.Whenever alignment and balancing of the rotating equipment has been performed but the vibration level is still too high Excessive structural vibration excitation during ramp-up or slow-down (stirring machine, flywheel, etc.) MECHANICAL STRUCTURES

Rod and thread : stainless steel EA = Assembling thickness

Stainless steel Pozidrive tip

Low Hexagonal Nuts (ECR Hm Low H50) A4 stainless steel - DIN 439 There is a variant in A2 stainless steel

A4 Stainless Steel Threaded Cylindrical Sleeves There is a variant in A2 stainless steel

Very high resistance to vibration, waterproof sealing and reduced inter-axis distance. Approved for non-cracked concrete.

Price per packaging-unit * 5kg packaging bucket