Decontamination - Import export

Autonomous and versatile Decontamination Equipment. Provides decon capabilities for People, Vehicles, Materials and Ground decontamination thanks to its 3 alternative output (Low Pressure, High Pressure and Steam). ATILA innovative modular design allows to use it as Decon Equipment autonomous or integrated in CBRN Decon Rapid Deployment systems and Mass Decon Stations

‘Dry’ misting system for whole room sanitising of rooms up to 90 metres cubed. Works unattended with auto cut-off.The InfectionGard autoMist fills the room with our non-toxic sanitising mist, which kills up to 99.9999% of all types of pathogen present, including Coronaviruses. The mist is so light it ‘floats’ in the air to kill airborne germs and kills surface pathogens as it fills the entire room.Portable, lightweight and easy to programme with simple instructions.

Our decontamination tents and cabins offer protection against CBRN risks, as well as toxic hazards, and can function as mass decontamination facilities or quarantine tents. High-quality inflatable frame tents Our decontamination tents are based on our high-quality inflatable frame tents, which makes them rapidly deployable and easy to install. All our decontamination solutions can be set up in under a minute. They are designed with mass decontamination in mind and can incorporate up to 3 lanes, to accommodate a constant flow of male, female and disabled victims. Easy to install and transport, our decontamination tents and cabins can be integrated within broader Colpro systems, or used as stand-alone solutions for industrial hazard control, military exercises and emergency decontamination operations.

Bi-directional shrinkage: his is determined during production by the choice of the extruder and the blow ratio. As a result, the shrinkage properties and the mechanical properties of a film are determined. VeriSafe ® films have similar contraction strength, both vertically and horizontally. This is unique on the market and gives our film unique features: - by heating - resulting in a perfect clamping of the film and also a permanent shrinkage force for a long time and therefore a super resistance to gusts of wind (guarantee up to 10 Beaufort). Welding properties: are determined by the raw materials used, as well as the capacity of the extruder. The welding is very important and must be permanent for long time. Welding's which dissolve over time weaken the tension of the film and thus also the stability of the work. Puncture resistance: this is determined by the blow grade of the extrusion and by the chemical composition.

Our EasyGel Protect® coring solutions guarantee you a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). SPECIFICATIONS • Transparent core tube with decontaminable accessories and its equipment. BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode • Clean Site • Protection of operators and their environment • Limitation of handling and risks related to height working • Product validated by regulations • Coring without water supply, avoids capillary leaks

Ductwork Design & Installation - Onsite Ductwork Fabrication A Fume Cupboard Extraction System. should be designed, installed to run efficiently, safely and with the minimum of noise levels. To achieve these requirements all our extract and duct work systems are designed, installed, and commissioned to meet the requirements of H.V.A.C. DW154 (Plastic duct work specification), and B.S. E.N. 14175. Extract systems to serve educational style fume cupboards will meet standards set out in Building Bulletin 88 or B.S. E.N. 14175. At the fume cupboard company, we try and hot air weld as much of the ductwork as possible this prevents leakage and sustains the integrity of the joints for the duration of its life. We provide a variety of different duct materials these consist of: Chemically resistant P.V.C | Polypropylene | Galvanized Metal. For extra protection we can also make glass reinforced plastic (GRP) and fire retardant coating for this duct work.

Lightweight and quick to deploy, MFC Internationals decontamination showers are available in a range of sizes and configurations. With no mechanical framework our decontamination showers are easy to transport and store when not in use. They stay standing and strong, without the need for continual inflation and can be erected on both soft and hard standings. There are a wide range of optional accessories available and like all MFC products they are highly customisable and bespoke options can be designed to fit any requirements.

Eco-friendly Chemical & Biological Decontamination of Medical Effluent Water and Dangerous Liquid for Contaminated laboratory waste infectious fluids blood and blood products Dialysis fluid waste Liquid pathological waste Pharmaceutical waste and dangerous chemicals. Chemical Neutralization and Biological Treatment Stainless Steel Reactor Tank Biological UV Treatment Disinfection with Ozone

Fresco hygienic air cleaning and disinfection device removes all kinds of bacteria, including corona, microbes, airborne pathogens, bad odors and other pollutants, in the air by periodically producing active oxygen and evaporating and spraying into the room in order to maintain indoor air quality during its operation. With ozone disinfection technology, it inactivates viruses by penetrating cellularly. TECHNICIAL SPECIFICATIONS Working Voltage: 12 Volt Ozonation Capacity: 200 mg/h Power Consumption: 8 Watts Display: 0.96 Inch Oled Body: Metal Operating Temperature: -33, +55 Degrees Celsius Feed Gas: Ambient Air Dimensions: 182.5 x 172.5 x 53 mm Weight: 2 Kg Extra Features Possibility to use in vehicle disinfection, Possibility of disinfection of fruits, vegetables, meat, fish in the kitchen Screw holes for wall hanger, 3M adhesive hook and loop tape for wall hanger, Ozone discharge holes made of stainless steel, long life corona discharge ozone generator, and so on..

Modular and Rapid Deployment solution for First Responders and Hazmat Response Teams that require People Decontamination capabilities in CBRNe incidents with chemical, biological or radiological agents.

Massive Decon Station for Vehicles of High Capacity. Its innovative design and versatility provides an outstanding decon performance: up to 90 vehicles decontaminated per hour. Assuring higher effectiveness and efficiency in chemical, biological and radiological decontamination of all type of vehicles: light, medium or heavy

Massive Decon Station for People Decontamination (based on Container). Modular set up to configurate 2, 3, 4 or 6 Decontamination Lines for casualties (valid people and disabled/wounded people)

Decon Agent RD50: decontamination of electronic equipment and sensitive materials Critical Infrastructure protection requires decontamination solutions that ensure effective decontamination of contaminated equipment, while protecting its integrity and functionality

Massive Decon Station for People Decontamination. Modular set up to configurate 2, 3 or 4 Decontamination Lines for Valid people and Disabled/Wounded people

CBRN Decontamination Rapid Deployment Large Capacity Decontamination of People, Vehicles, Materials, Ground and Electronic Equipment. Equipped with 2 decontamination equipment that allow to carry out two decontamination processes simultaneously. Its high capacity and speed of deployment allow it to ensure an effective and effective response to any chemical threat (ICT or CWAs), biological or radiological and in any scenario (urban or open field)

CBRN Decon Rapid Deployment system for First Responders Decontamination of People, Vehicles, Materials, Ground and Electronic Equipment. Provides most effective CBRN Decon capabilities to ensure an effective response to any hazmat incident with chemical (TICs or CWAs), biological or radiological agents

Decon Apparatus ATM10 provides to First Responders and Emergency Teams a flexible and multitaksing equipment to carry out decontamination of people, vehicles, materials and building interiors.

The AmbuGard DMS1998 portable misting device is simply placed inside vehicles with the doors closed to achieve total decontamination of a type “B” ambulance in under 3 minutes – including dwell time! This means vehicles can be sanitised quickly, cheaply and to log 6 reduction levels, without the need to take them off the road for lengthy periods.

CAS Hire have a range of commercial and domestic air cleaners for hire.

iTherapy Eco is intended for food industry, food storage, food transport, etc. It prolongs the freshness of fruits, vegetables, bread and other food. Reduces bacteria exposure, fungus spores, reduces absorption of toxic chemicals, maintains stabile levels of co2 etc.

The decontamination of COVID-19 is a specialit of our company. We combine our expertise in biohazard cleaning with the latest technology for virus disinfection as part of our pandemic response. To stop the spread of Coronavirus 19 in Birmingham and throughout West Midlands, hire our deep cleaning service today In the event of a COVID-19 outbreak, we will respond quickly to ensure that your premises, furnishings, and equipment are thoroughly disinfected, protecting your customers and employees. In the year 2021, not only are coronavirus outbreaks on the rise but also a pandemic influenza outbreak may cause small and large businesses to close and kill loved ones at home. Antiviral clean needs to be scheduled as soon as possible. Professional cleaning and disinfection services using CERTIFIED detergents in 2021